How to sand cast a ring + Carve your own wax ring || At home jewelry tutorial for beginners

Jewelry Making
51 followers
32 Video Views·Jan 26, 2026
Hi, I'm Chloe and welcome to my studio. Today we are going to be carving a wax ring and then
sand casting it. So come along with me as I show you what I do. So for the wax part you are going
to need some wax of course. I have this matte ring tube from Rio. There's tons of different kinds
so you can get different like shapes or sizes or different types of wax and play around with it and
see what you like but this is the one that I will be using today. It works great for signet rings.
You also are going to want some calipers to help you get the right lines around the ring
and then you're going to need a jeweler's saw and ideally some wax blades which I have in here.
So the difference between wax blades and regular blades that you would use to saw metal are that
the wax blades are spiral. So the wax blades are spiraled instead of just one long thin blade and
what that does is it prevents it from getting all gunked up and caught in the wax. So you could
technically make a regular jeweler's blade work if that's all that you have but it gets really
frustrating and just takes a lot longer than if you use one of these wax blades so I'd recommend
checking them out. One of the first things you're going to do is use your calipers to mark about how
thick you want your wax to be and remember you are going to be shaving some of it off so I would use
a little bit extra for leeway and then you can always sand it down further when you're done.
So what you want to do is literally just dig them in like this and go all the way
around so that's where you're kind of marking your saw blade lines and then you're going to
take your jeweler's saw with your wax blade in it and cut as straight of a line as you can following
those lines that you marked. This part gets pretty messy but it's just wax it comes off of clothes and
as long as it doesn't melt it comes right out so it's not a big deal.
And then you can put this piece away and there is your ring blank and then the next thing you're
going to want to do is take this ring blank and just file it flat on both sides.
I bought a really cheap file from the hardware store for this because it's just going to get
really gunked up with wax but you can get whatever kind of file you like. This one's
pretty rough for the beginning phases so it takes off quite a bit of material and then
one thing I forgot to mention that you're also going to need is if you're doing a ring is this
ring sizer mandrel so this is a little bit different from what you'd use to bend like
metal around if you're making a ring from metal instead of wax. This one has a blade right along
the outside right here and then it has sizes here they're not usually super accurate so I would
usually check it against a ring sizer an actual ring sizer mandrel but all you have to do is you
actually it's really cool you just twist this along the inside and it literally just takes out
so you can see there it shaved off the material and you just do that until the ring is the size
that you want it to be. Make sure that you flip it upside down a couple times since this is tapered
you want to make sure you're taking off material from both sides so it's as even as possible.
And this ring is for me and I want to be able to wear it on my right hand ring finger and as you
can see it fits pretty well so I am going to start carving it down now. And now you will again take
your calipers and measure out about the thickness that you want the ring to be again I might leave
like a little bit extra on here so that there's a little bit of room for error but then all you
have to do is you actually go right around the outside of the ring like this and just kind of
loosely mark it and I always and I always mess up my lines but I have a nice loose idea of about how
big I want the ring to be or rather how thick I want the material to be from the inside to the
outside of the ring. Okay and then you can do this a bunch of ways how I'm gonna do it is I'm gonna
start using my crossbar bit and start taking off some of this material and then I'm gonna use the
rough file and then I will use a file that's a lower grit. You can do all of it just from a file
if you don't have a flex shaft it's really up to you or if it's your first time doing it I did a
bunch for my very first time or my first like handful of them just totally by hand with my
file it takes quite a bit longer but I think it's great learning experience for like how to get the
right shape of the wax. So we're in the ugly stage right now but that's okay. I took off some with
the drill bit and then we are going to take off some more with the file and there's lots of time
left for shaping and everything so we're gonna make it pretty now. So now I literally just file
it down. Yes I am one of those people who does the file both ways with the wax it doesn't really
matter it's just not taking off material at one material when you go up it's only taking it off
when you come back down. I just feel it's easier for me personally with my hand-eye coordination
to just go up and down. I would be careful especially if you're using green wax so green
wax is kind of brittle it's fairly sturdy but if you like press too hard on it it can crack you
can repair wax with heat but it's a little bit more frustrating to do that so just when you're
pressing down be sure to like hold at the bottom instead of just like pushing all of your weight
onto the top. All right much better so not perfect but now we're going to use a file with a lower
grit to start getting some of these edges a little bit better and start getting the shape
like a little bit more how I want it to be. What always bothers me is when there's little bits that
aren't perfectly symmetrical so I'm trying my best to kind of work out some of those things here.
All right looks pretty good. Yeah ask me. It's not perfect but it's gonna be sandcast so it
also doesn't get like every single little detail like it would in a lost wax casting either. One
thing you can do if you're feeling brave is very very very carefully use a lighter to round out
some of the um teeny little like imperfections that you didn't get out with sanding. This is wax
so it will melt. Look at that. Perfect. Okay then we're gonna weigh the ring um because we have to
figure out how much silver casting green we're gonna use. To be honest with you after I weigh
the ring I usually just ask ChachiPT how much casting green to use. You always do need to add
a little bit more than what you would need to just cast the wax because of the sprue that's
gonna be at the top. So this is 1.1 grams and I will figure out how much silver we need. All right
now comes the fun part. Um the sand like really sticks to your hands so I always try and use a
glove um when I'm doing this but basically you're just gonna pack the sand into the bottom side of
the mold as hard as you can and then use a hammer and just gently hammer it down and then from
there you want something flat that you can just run across the surface of it. I'm never good with
being prepared with that but I could use this one. So you just want to make sure this is nice and
and packed in. There's a few spaces right there that I want to fill
and then you're gonna take a little bit of baby powder. Make sure you rub it
on your piece so that your piece releases easily and then you're gonna push your piece
about halfway in. You want to make sure it's as flat as possible and then we're gonna do
a little more baby powder on top and then the top half of the mold goes on and then you get
to hammer in the rest of the sand and this you want to make sure to pack really tightly.
Beautiful! Look at it! Woohoo! All right now comes the moment of truth when we
just really carefully release the mold and see if it did what we wanted it to do.
Yes! Nice! Okay and then I usually use some tweezers to just try to really gently
this piece. You want to disturb as little as possible. I can see some coming up right there
so I'm gonna just repack it before I pull it out. Beautiful! Look at that! Oh my gosh that's a nice
clean mold. Okay cool and then we have to do a couple things. So first we need to make again
the channel to pour so I kind of just go like this and gently carve some of this sand out right
here. It's okay if the sand at the top doesn't stick. It actually usually doesn't for me but
here you do want to have some nice clean channel. You have to do the same on the other side as well.
Okay and then you also need to make some outlets for the air. Basically this is going to create a
lot of really hot air when we pour the silver down so we need to create some channels. So what I do
for my channels, sorry if it's hard to see here, but I just draw a line with my soldering pick
usually. A little line right here and then you just stick it all the way down to the other side
so that some air can get out and you have to do that a few times. So here's another line.
A little bit of sand in there so you just want to make sure that the mold is as clean as possible.
There you go before you put it back together. Okay all right now for the really fun and also
kind of scary part. For the moment of truth. Yay that looks so beautiful. I love it. Oh my god.
Okay very hot. Remember that. So there's the sprue. There's gonna be a little bit of cleanup
and there's the channels but oh my gosh we have a nice beautiful solid sterling silver ring.
Thanks for hanging out with me in my studio today. This was so fun. I haven't done sand casting in a
while so it's always fun to kind of like flex those muscles and try to make sure that I remember how
to do things. I'm really excited to clean this up. I hope it has some like natural texture left on it
when I'm done and yeah I love it.
