⏰ TIMESTAMPS 0:00 - Intro 0:13 - Pick your font 0:28 - Step 1: Create a back up 0:52 - Step 2: Using the offset tool 1:35 - Step 3: Creating the shadow effect 1:50 - Step 4: Using the slice tool 2:09 - Step 5: Shadow effect results 2:16 - Tip 1: Self critique 2:26 - Tip 2: Using the contour option 2:52 - Tip 3: How to change the shadow 3:44 - Tip 4: Using the offset tool for a better shadow effect 3:59 - Tip 5: Experiment with shadow placement 4:11 - Outro
💬 Leave me a comment, DM me on Instagram, or email me at [email protected] if you have any questions.
🔗 Some of the links above are affiliate links and, at NO additional cost to you, I will earn a commission if you decide to make a purchase.
What's up everybody. In this video, I'm going to show you how you can create shadow letters
with any font, including your favorite. It's easy and it's all using Cricut's Design Space.
So let's jump into the program and get started. First, pick the font of your choice. Then we're
going to write out the word or phrase. I found that using capital letters worked best, but feel
free to experiment. Make any spacing corrections and any other edits you want now. Once everything
is ready, here on the right side, we're going to duplicate the layer. The new duplicated layer
will be the backup, just in case things go wrong in the next steps. Let's rename this layer as
backup. Double clicking on any layer will bring up the rename option. Let's drag the backup to the
side. Then we can hide the layer using the eye icon. On our main layer, we'll use the offset tool
and set it to around 0.02 inches. This offset size works for this font. You might like a higher
or lower number for your project. We'll choose the rounded corners option and the weld offsets
option and apply. The offset was applied to make the shadow effect slightly more full compared to
the original, which you'll see in a few more steps. On the layers panel on the right side,
we can see the offset layer is below the main layer. With the offset layer selected, we are
going to change the color so we can see what's going on more clearly. Here's where the fun begins.
With the offset layer selected, move the layer down and to the left. To see the effect slightly
better, change the main design color to white. As we see here, the red will be the shadow, but we're
not done yet. Once you're happy with the shadow distance, highlight select both layers. On the
layers panel, we can see both layers are selected. Then we'll go down to the bottom right where we
will select the slice option. In the layers panel, we can see that a few layers were created. Hide all
layers besides the bottom sliced layer. And there is the shadow effect. But here is where self-critique
comes in. Here's what I mean by that. If I zoom in, I can see a thin line in the letter A that's
sort of distracting. Here's how we can fix that. With the layer selected, on the right side, go down
and select the contour option. In the contour window, we can select that unwanted line either
from the left side of the window or by finding it in the list of shapes on the right side of the
window. Deselect the unwanted shape and exit the contour window to finalize the change. I think this
came out great, but let's say you wanted the shadow further down or more to the side. How do we change
it? Well, here's where the backup layer comes in. I'll put our current shadow layer to the side and
we'll do this process over using the backup. So let's unhide the backup layer, but this is very
important. Duplicate the backup layer again. Remember, we want an unedited version of this design
for whatever reason. We can rename this new duplicate layer, edit, and let's hide the backup
layer again. We'll go through this process again. This time, I'll put the shadow slightly more to the
left. Highlight, select both layers and hit the slice option. Hide all but the last layer and we
can compare. I prefer the first one we did. We can also use the offset tool again to make the shadow
fuller. Do this part to your liking. We'll keep the offset layer and hide the other layer. Here are a
few designs I made that have the shadow effect added. One thing I want you to notice on this
design specifically is the shadow. It's not down and to the left, but instead is up and to the right.
That's the control you have with this technique. I hope you enjoyed this tutorial
and if you give it a try, tag me on Instagram. I would love to see your project.
Thank you so much for watching. I'll see you in the next video.