How to make a HEART charm - Step by step! Jewelry making tutorial

Jewelry Making
51 followers
2 Video ViewsยทNov 23, 2025
We're using few hammers, few punches and make that beautiful charm happen. That's why
working in layers is very effective. Perfectly and going around. Hello guys and welcome back
to my channel. So today we're making charms for that beautiful toggle bracelet we made
in the last video. And I told you I will show you that. And that involves
lots of hammering in the process. But you know how I love to hammer my pieces. That finish of
the surface is something else. It always looks way thicker than it is. That's why we can play
around with thinner metal and bend thinner metal as well. Because hammering does that hardening
part to the piece. And it always looks more sturdy. Because you want your pieces to be lightweight,
but to have that sturdy construction. So in this one I'm just giving you that lightweight and
sturdy construction. And I truly love those charms. If you want to start to hammer your pieces out,
I totally recommend to start with heart shape. And for this one you actually can use round bases.
So punches are like, they're like a dream to use it for the hearts. If you don't have punches,
have it. Even from my videos you can see how much I actually do use them. Because
they're irreplaceable. There is nothing like it. You can experiment on them. You can use them
various of ways. Various of ways. Like really. We're using few hammers, few punches, and make
that beautiful charm happen. And this one is very cool because it's double-sided. So we have
a heart from one side and a heart from other side when the piece is actually spinning. Because
charm bracelets spins thousand times in a day for sure in various directions. That's why it was so
important for me to not have a bad side, you know. So it's very nice to have that good side from both
sides. So we will create all of that and it will be a very cool jewelry piece. So yeah, let's get
started. We're starting everything by cutting some hearts from the sheet. I will show you how I'm
cutting two hearts, but I did cut a lot of them. Same shapes but different sizes. When we're cutting
it's very important not to forget that we have three teeth per cut rule. That means that three
saw blade teeth has to be in contact when you are sawing. That's how you know when the saw is good
for your sheet. Usually now I can tell by the sound how it's going. You know, if the sound is hard for
your ears, usually the saw blade is not great. But it's worth it. It saves a lot of time and other
steps. And now after filing, we're finally hammering the shape. We're hammering annealed metal. So it's
soft. We can work on it. And I'm very happy to announce that this video is sponsored by
Aria Grand, which is a huge jewelry supply store where I'm buying the most of my supplies from. I
can't recommend the store enough. They have different categories from where you can choose
from. From silver, tools, equipment, whatever you might need for your beautiful jewelry creations.
And they're giving you a code with $20 off your shipping price. Thank you Aria Grand for sponsoring
this video. You don't want to hit the same spot every time because you will thin metal out. That's
why working in layers is very effective because you begin from the bottom and just come gradually
to the top part. In this way, we can always be in control and know that we're actually not hitting
the same spot. While I'm hammering, you can see that my hammer always hitting the same spot. I'm
trying just to move with my heart on that punch. That makes it easier because you don't have to
navigate everything. Because here I'm stable with my hammer. I'm hammering just one spot all the
time. While with other hand, I'm moving with my heart on that round punch and creating that shape
in that way. And I have to mention that we're working with 0.5 millimeter thickness of the metal.
Now we're putting our hearts on the block because we need to have flat bottom. We raised everything
up. Sometimes it looks like a mess. Don't worry. We can fix everything. Even bad hammering could
be fixed if it's not like thinned out metal. So you put it on the block. Take it narrow head hammer
and go chest on the edges. Try not to hit the heart itself because you will ruin all the work
that you did before. But even though you would hit it, you can raise it again. This is how it works
with metal if you won't outstretch it because if you will outstretch it, it will break apart. We
will have some splitting. So be careful with that. Now when the first round is done, we can anneal
our metal again and do kind of the same steps again. Let's say for this size of the heart,
I call it like middle size of the heart. I was using number six with my punches. Just so you
would know if you want the same size of the heart. But just play around and experiment with punches
because it can lead you to way quicker way how to shape the heart as well. And it really depends
how much you want to raise it, how much you want to curve it and make all that rounded 3D view
or you want to raise it just a bit. Then you can just get away with one size of the punch for the
heart. Each heart would have different size of the punch of course because you need smaller as you go
down. And now we're finishing the second round and putting that on a metal block again just to
flatten it out again. This time I used one of my Rapuse tools. Maybe you can find something
similar in your tool drawer. You just basically need something to push metal down exactly where
the place is. But we don't need to close it fully because we need a bit of open space on the top of
the heart just that air could go out while we're soldering. We always need some kind of hole if
we're doing 3D soldering. When we pushed all the hearts down it's time to sand the bottom part
because we want to connect both sides of the hearts. We need to have the edge back. Sometimes
it gets squished in a hammering process and we want to have the thickness too because
more thick you will have that edge easier it will be to solder both parts together. Now it's time
to solder and if you did a good job to making that flat edge we won't have any problem in soldering
station because hearts kind of stick together especially when you heat them up because
borax gets sticky and it just sticks with each other. It's way easier to solder as well.
We just need to have a good edge and soldering won't be that hard. In this part the hardest part
is to make all the hearts the same temperature. As you can see sometimes my upper heart was
way hotter than my down part. That's why we have more coming up with the solder itself
and we have that blah. I call it blah all the time. It's very important how you will move
the flame around your heart. You want to keep that heat going throughout all that piece you
want to solder. Then your soldering will be a blast really. That solder is just going
we want to create a true charm and true charm needs to be hanged on something. We need
kind of a hanger. Hanger we will make out of the jump ring. As you can see now I'm using burnishing
tool to clean that gap between my hearts because it's very nice way to make a hole pretty and all
the edges to be burnished. Sometimes I do use burnishing tools just to make that place very
clean and shiny because to reach that place it will be very hard after we will solder that jump
ring. Now we're cutting that jump ring that we will use for our heart. The best shape is just
to measure exactly what you need for your piece. Exact shape how it's going on the top. You want
to make lines with the sharpie the direction you have to cut and cut it as much as you need and
ruin as much jump rings as you need as well just to make a good fitting when it comes to this place
because everything with soldering is just about good fitting. If you will try your best and you
will have that beautiful fitting, soldering will be very easy at this point. This time we need a
third hand for sure because we need to have everything stable here. Heart is curved in various
ways. We want stability when it comes to hanging part. When we use a third hand don't forget it's
a huge heat sink. We need to make sure that we're heating that up as well. I have separate video
about third hands when it comes to soldering so I will link that here if you haven't seen it.
It takes some time and practice to actually get along with third hand.
We will polish all of the charms now. They are so cool and tiny. Some of them are tiny and falling
yeah but they're very very cool. I love all of the sizes like really it's so pretty to look at
and you want to use baking soda for this one because we have holes in it. We're leaving holes
in the top part. That's why when you're taking that out of your acid make sure you're putting
that in the baking soda. Baking soda will stop acid to work. It's kind of destroying your piece
if you left it too long. Usually I'm using baking soda just when I have more complex pieces. If you
have intricate pieces use it because you don't want active acid for too long on your pieces and
yeah so let's sand and we'll come back. But before sanding we need to clean excess solder
and we need to prepare all of the hanging part that would be pretty and going very beautifully
with our piece. For that I was using round file. Then I was using ratedeco wheels. The small ones
they're really nice when we have something like this where we can't reach it fully but that wheel
truly goes around and reach all the area. I like those really. I do recommend. Then I went on the
edge with my sponge. It kind of blurred everything out and create a very beautiful edge around all
of the heart. And to finish that all off I used the deco wheels. The red one and the blue one and
went through all of the hearts. Of course don't forget the movement. The direction and the movement
is the most important part when you're sanding and polishing. It will determine how your piece
will look like in the end. So pay attention to that always. And finally after all that sanding
and all that work we can hang our charms on our toggle bracelet. It's you know it's something
when you work so much and you can finally put them on to actual jewelry piece. It's nice.
It's really nice. But we still have to solder some jump rings that connecting our charms with
our bracelet. Of course after soldering we need to clean again. Cleaning quite a lot before putting
that in a tumbler. Tumbler gives even more shiny finish. So for this piece I was seeking for that.
And voila! We have a beautiful charm bracelet.
Hello after I don't even know how many days later. Because this piece was quite quite a big one you
know. Like I wanted to just make so many hearts and charms in this bracelet. But it's totally
worth it. I love this bracelet. Like I truly love it. Like all that it hangs. And yeah it was a lot
of work. And actually I spend the most time on polishing and sanding. Because I'm a freak
when it comes to polishing and sanding. So I desperately wanted to put that in the tumbler.
But we have those holes in the hearts. Which is very not good to put in a tumbler. If you have
holes in your pieces. Because all those small metal balls will come in and stay there. And your piece
will be basically ruined. Because you don't want different metal with be with your silver. It will
just tarnish way quicker. Because it always touches that metal. So you want to be careful. That's why
I was like spinning my mind how to close those holes. And I tested that teeth picker. Because it
was very good choice to put those in. I thought it can like get out just from vibration when you're
tumbling your pieces you know. But actually it didn't fall out as you saw from the video. And I
thought it could get very soft. And that would be a very big problem to take it out. But actually
it didn't. It hold that hardness that it has. And I had to like take that out with the force as well.
Like I was putting that with the force as well. And now I'm very happy with this piece. I will put that
on. And we will have that class part in the video. Because we have smaller one here. The bracelet I
showed you before had a bigger one. So I will put those sizes in one video for you. So we have all
the movement. And it's like gliding on my hands so nicely. Actually it's very soft to touch. And
yeah. I don't have any problems I'm guessing with this one. If you have questions or suggestions
let's meet in a comment section. And I hope you like it. And I will see you in my next one.
