How to get on/off a bike

Amazing Bike Ride
97 followers
Nov 16, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video demonstrates four different methods for mounting and dismounting a bicycle, ranging from dangerous habits to professional racing techniques. The guide emphasizes balance, safety, and efficiency, providing specific instructions for both standard pedals and clipless systems to help riders avoid falls and injuries.
When you want to go riding, you first have to get
on your bike and eventually you're going to have
to get off your bike.
There's a couple ways
of doing this,
some safer than others.
Here are
four ways of getting on and off your bike from the good,
the bad, the popular and the professional.
Okay, bad technique. Let's get into it.
Lifting your foot over the top tube. I mean,
it feels like dislocating your hip. It's super hard.
You can get your foot caught on the top
tube, fall the other way. Terrible move.
It's just not a good look. And if you finish your ride,
Going off this way, it's just really impossible almost.
So, bad technique. Just don't.
Okay, so the best technique or the good technique is...
To put your hands on the handlebars,
you want to lean that bike over now, swing your leg over,
which makes it easy, and stand it upright.
You want to do that all right when you're in front
of the seat. If you do this when you're on the seat
or trying to get on the seat right away,
you're going to be off balance.
It's going to be almost impossible if your seat is
to the correct seat height to do this from this position.
Be in front of the seat when you put that bike upright.
Now the next move would be with your
strong foot. Most people use their strong foot
or I use my right leg. Put that pedal into
one-two position. Now when you push off you put
your left foot right away on the pedal to build
up speed which gives you stability.
Don't get on the seat right away. Find that pedal first,
stay unseated, build up speed and then get seated.
So it should look something like this.
And because it was so much fun,
let's do it one more time from this side
so you get a better angle of it.
So to get on your bike, lean your bike over,
have your both hands on the handlebar,
swing your leg over, be in front of the seat,
you move the bike up,
put that pedal into a one, two o'clock position,
push off, place your left foot on the pedal,
stay out of the saddle, get seated,
and go on a 100-mile ride.
That's it.
The beauty of this technique is
everything works the same way in reverse.
So get off your seat, take your foot out,
Lean your bike over.
Take your leg over and you look like a pro.
All right, so now if you're adding clipless pedals to the scenario,
you still get on the bike the same way.
You lean the bike over, you swing your leg over,
but now instead of just placing your foot
on the pedal, you clip right in.
Once you're clipped in, you're still in front of the seat.
You put that pedal in the one to two o'clock starting position.
And when you push down and start accelerating,
you get your butt on the seat as soon as you can.
And trying to find that left pedal with your left foot, then clip in.
But you want to be on the seat because in case you slip off,
clipless pedals can be a little sketchy sometimes on the shoes.
If you miss, you definitely want to be on the seat.
Because if you only do the feet, you could crash and fall.
So you push off, get on the seat, and find that pedal, and off you go.
You push off, get on the seat, find that pedal, clip in, good to go.
Now when you're coming to a stop,
you want to clip out a little bit behind.
You could place your foot still on the pedal,
and then get off the seat, done.
So you got to plan a little bit ahead,
clip out before you come to a complete stop.
I'll stop.
Because if you don't, things can go badly.
And but trust me, it's happened to the best of us.
I think there's not one rider in the world
that hasn't forgotten to clip out in the beginning
and fall over. So don't get so upset.
It's okay. You only do it once. Trust me.
I don't know who started this.
And I don't want to know who started this.
Must've been horse people, I guess,
but whoever decided to place their foot,
On the pedal first and then skateboard kick themselves
and swing their leg over.
It must have been horse people. There's no other way. No explanation.
The problem with this whole technique is that time
when you're skateboarding yourself to speed.
What if you're falling the opposite way? I mean, there's nothing there.
You're going to fall over the bike.
The only way to save yourself is then
get that leg over there really quickly.
So I think it's very dangerous. I don't like it.
But I see it a lot. It's really popular.
And uh, yeah, blame the horse people.
It is a bicycle. The seat is right here.
It's not a horse where the saddle is like, I don't know, up here?
So mounting your bike like it's
a stallion? No.
Well, the champions of mounting
and remounting bikes are cyclocross racers by far.
If there's one technique that you can...
Use the rest of your life is learning how to remount
or dismount like a cyclocross racer.
I got some really good video footage
from a cyclocross race I did last year
following two racers and let's put that in while I talk about it.
All right wait we've got
to go back.
There's one little detail
I want to point out that
I really like to do.
Some people don't but let's talk about it right here.
To dismount at high speeds,
I would recommend clipping out the left foot
before swinging that right leg over. Some racers disagree with that,
but those are the ones that never been stuck
in their pedals inches before the barriers.
Now before you touch the ground with your foot,
you want to place your hand
on the top tube and get ready to lift the bike over the barrier.
As soon as the first step on the ground is completed,
lift your bike and keep your elbow
tucked in. This will allow you to lift
the bike higher without hitting the seat against your arm.
To remount, you need to move your hands to the handlebars first,
and then, out of a running
motion, lift your right leg high enough
that only a little jump is necessary to get on
your seat.
You don't want to jump higher than you have to,
and landing or letting the inside of your
thigh hit the seat first can dampen any harsh impact.
Then you just have to find your pedals, click in, and off you go.
There's another variation of this where everything is the same,
but you step through, which allows
This allows you to make a complete stride before the barrier.
It's a little outdated now
and some riders really have strong feelings about
this. They hate it. All I know is I'm allowed to do this
because I learned cyclocross in the 80s with toe clips.
Well there you have it. Four techniques
on how to get on your bike comfortably.
I'm sure there's techniques that I've forgotten about but until now
I thank you so much for watching. I'll see you on the other side.
