How to create a flower box arrangement .

Craft Flowers
142 followers
3 Video ViewsยทDec 26, 2024
It already has the ribbon on it and our sticker on it.
We need to make the box, we need the flowers.
So I've just had an assortment of different flowers.
We need some wires to wire the flower.
We need some paper to stick in the box.
So we've just got clear cellophane here in a different colour.
We have a floral foam block.
So we are going to place the paper with the block inside the box.
And flatten out your paper.
Then we have some foliage, some greenery.
This is fiverna foliage, you can use anything you like.
Anything that you have in the garden.
Camellia or gardenia is very popular.
Then what we are going to do first is just bring up the box.
So just go around the edges, like so.
And filling up the edge of the oasis just into the base.
And this just means that you want to see the edge of the oasis.
So we don't want to see the oasis in any direction.
So we are just sticking up little bits of greenery.
And sticking them around the edge of the oasis.
Just kind of around the edge, not too far.
All the way around.
You can see the whole edge has filled up there.
And now I'll just put a few bits that are a bit longer.
Generally that's the top bits of the foliage because that's the nicer bits of the foliage.
So that means the middle bit is all filled up.
I then like to put the...
So the flowers I'm using today are gerberas, lysianthus.
Some beautiful blushing brides.
And some roses.
So with the roses we wire them.
You just need a 22 gauge wire and you stick it up in the top of the rose.
And then just twist it until it stays firm.
So with this one you just stick it up into the top of the rose, not too far.
Twist it until it stays firm.
And wiring gerberas is the same thing.
These are a little bit more delicate than what a rose is because they're not as hard.
So you just stick it to the top like that.
And then just twist it.
And that will mean that the gerbera will stay nice and firm and not go floppy.
And then twist it.
There we go.
So we've got some foliage.
We've got some flowers.
I like to start with three points.
I like to start with the gerberas because they're the biggest ones.
So you're going to cut it probably to about half way.
And then you're going to stick one gerbera at the front.
This is my front because that's where my sticker is.
You can have your front wherever you want.
But there'll be one gerbera at the front.
And then there'll be two at either back.
And that means then you're working in a diamond shape like a three.
You want them to be fairly even but in like a dome shape.
So it's rounded.
Then I'm going to put some roses in.
So this one you should probably leave to about three quarters because this is going to be our middle one.
So you will go in the middle like so.
And then I'm going to put some on the edges to fill in the spaces.
So this one will probably be a little bit shorter than the last one that you had.
And it will go on the side just here next to the gerbera.
And my other rose will go on the other side.
So you're starting to get that shape.
And then I'll put one more rose in between the other two gerberas at the back here.
You can move things around as you go if you're not happy with where they are.
I've put some lizianders in now.
And basically we're just going to fill up all the gaps.
So you've got to judge how tall to cut it as to which shape you want it to come out like.
Put those two lizianders either side there.
It's just filling up that gap there.
I'm going to put some more here and then I'll put some more around about there.
I'm not sure where to cut it to.
Cut it longer first and you can always cut it down.
Because once you cut it shorter you can't make it longer.
But you can always make it shorter and cut it a second time.
And don't be afraid to push it into the floral foam.
Because the more you push it in, obviously not too far, but the more you push it in the more water it will drink.
And the better it is for the flowers.
If they're just touching the floral foam they won't drink enough water.
So they need to be right in there.
And also when you push them into the floral foam they won't move the further you push them in.
If you just poke them in and they're just sitting there then they'll move around in the floral foam.
You don't want that.
I'm going to put some of these Flushing Brights in now.
And again, wherever you're going to put it you just cut it to whatever size you feel is right.
If you're not sure then cut it longer and cut it shorter again.
So I'm just filling up the gaps now in here.
A hole just here, so I'm going to put one just here in that hole.
And fill up that space there.
And just drag it over a little bit.
I think I might just put more of these Lusandras up here in the top.
Just to fill up this hole up here.
Pretty much our box done.
I would now then fill it up with some extra foliage just to fill up the spots.
Because I like them to be nice and full and I don't like to see any holes in it.
So I would just fill it up with some extra foliage, whatever you have.
The Gardenia, even Hydrangea is really good. Hydrangea fills up spots really well.
But that's it, that's our box done.
Ready to give to someone.
You can use any flowers you like.
You can have Hydrangeas, Roses.
Gardenias don't tend to last very long but you can just pick up some flowers from the local supermarket.
You only need a few to fill it up with foliage and that's it.
That's our box done.
Go to Beadaholique.com for all of your beading supply needs!
