How to Create a FIRE EFFECT in After Effects

Vaath Pri III
43 followers
7 Video Views·Oct 31, 2022
This video is brought to you by Skillshare.
What's going on guys, welcome to my channel. Today I'm going to be showing you how I created
the fire wand effect inside of After Effects. First I'm going to be showing you how I shot my
footage and talk about the fire assets that I use. Then we're going to jump into After Effects
and I'll walk you through how I created the effect. For my footage I filmed one clip that
was a handheld shot of my beautiful wife Mena pulling out a wand and acting like she's casting
a spell. I like shooting a lot of my effects handheld or with some camera movement to them
because it helps sell the effect more rather than if the camera was locked off on a tripod.
I had a light set up off camera that I was able to turn on and off with a remote.
I used the Godox LC500R which is a portable battery powered light that allows you to
change the color of it. It has a few light effects programmed into it and one of them
is a fire setting which is really cool because this setting mimics the flickering light that
fire gives off. So I had the light on the fire setting and then once Mena pulled the wand out
I turned the light on so that it would light up the scene like if there was some real fire there.
Then I turn the light off for when the fire is supposed to be going out as she puts the wand
away. For the actual fire I used fire footage elements from Action VFX. This is hands down
my favorite place to get this type of stock footage like fire, explosions, smoke, all those
types of goodies that you would use for your action effects. I ended up using two different
fire elements from Action VFX. One was inside their fire collection that was part of the
The one I used was called Wide Wall Fire Side 4. I used this one for the mainstream of fire coming
out of the wand and then I also used a fireball element that was inside of their fireballs pack.
It was the one called Small Fireball 9. I used this one for the initial ignition of the fire
coming out of the wand and this asset is actually free right now on Action VFX. So even if you're
not going to create this effect right now or at all, make sure to go download that free asset
because it's a 2k clip that's really nice quality and maybe you could use it for something later.
They also always have a bunch of other free elements that you can download.
I also use this really old spark asset that I've had for like 10 years. It's only 720p but it was
the perfect look for a wand spell and it has a smoke puff at the end of it too. I have no idea
where I got this spark asset from but I'll leave a link down in the description for you guys to
download it for free if you want to. So okay with all that being said let's jump into After Effects.
But first really quick before we do I want to thank the sponsor of today's video Skillshare.
Skillshare is an online community for creative people and those who are curious about learning.
With a premium membership you have access to thousands of classes on topics such as design,
photography, and video. I've been using Skillshare lately to learn about topics that I'm not that
familiar with. I've been wanting to learn more about motion design for stuff like graphics and
title sequences. A class by William Kessling that's called Animation for Graphic Designers
has been perfect for that. His class has been a great way for me to get more familiar with the
motion design world and build up some of those skills. Right now if you click the link in the
description below the first 1,000 people will get a one month free trial of Skillshare premium.
So if you're interested in joining Skillshare make sure to check out that link below and enjoy
your free trial. Inside of After Effects first thing I did was track the tip of the wand. The
only way you can really do this is by manually tracking it. The motion tracker inside of After
Effects won't work on this. So the way I did that was came up to layer and created a new null
object naming it track null. Then I opened up the position on that null, hit the stopwatch,
and then went through my clip and repositioned the null to align with the tip of the wand.
I started tracking the wand right as the light turned on because this is when the fire is
supposed to be coming out. Now I was able to skip every three to four frames since the wand wasn't
moving that much and that sped this part up. Just remember the more movement your wand has the longer
it will take for you to do this part. So after I was done with that I brought in the structure fire
element and stacked that on top of my footage. Then I scaled this to the size I wanted and
repositioned it to where it lined up with the tip of the wand. I also trimmed this clip so that it
started as the fire was already finished igniting because I'm going to manually animate it so I can
control how I want the ignition to look. Also with the fire layer selected I came up and selected
the pan behind tool and brought the anchor point to the base of the fire. Then I dragged the pick
whip on the fire layer and parented it to the null object. I also set this layer's blend mode to add.
Now if I play that back you can see the fire moves around with the wand like if it's coming
out of it. Something I did to help shape the fire a little bit more and line it up with the tip of
the wand better was add the mesh warp effect. Then I just squeezed this down and reshaped it a bit to
how I wanted it. Next I animated the ignition of the fire. So to do this I made sure I was at the
beginning of the fire layer and created a small mask around the fire right in front of the tip
of the wand. I then opened up the mask path, hit the stopwatch, and keyframe this mask so that it
expands over the course of about 12 frames. I also set the mask feather on this to 30.
So now we're getting somewhere and the fire looks like it's being ignited out of the wand.
The next thing I did was add in the fireball element and stack that on top of the structure
fire layer. I resized this to how I wanted it and positioned it on the tip of the wand.
I trimmed off the first few frames of this layer so that it started when the fireball was a little
larger. I also positioned this layer so that it started one frame after the structure fire started.
I then made sure the fireball layer was selected and came up and selected the pan behind tool again
and positioned the anchor point to the base of the fireball where the point of the wand is.
I then parented the fireball to the null object and changed the blend mode to add.
After that I opened up the position on the fireball and animated it to move with the
structure fire ignition. I made sure the fireball stayed just in front of the structure fire layer.
This is so it looks like the ignition was the fireball moving away from the wand and the other
fire layer is the stream of fire behind it. Next I selected the structure fire layer and changed the
track matte to alpha inverted. If you don't see the track matte tab you can come down here and
select toggle switches and modes. After doing that it turns off the fireball layer so I came over and
turned that back on. Now these two fire layers blend together more. Wherever the fireball is on
top of the structure fire layer you won't see that layer underneath. I'll toggle it on and off a few
times here so you can see what I'm talking about. Next I started stylizing the look of the fire.
First I added an exposure effect to the structure fire layer and changed the amount to 1.5.
Then I added CC force motion blur and set the motion blur samples to 10. I also added a directional
blur with the blur length set to 4 and set the direction to be the same as where the fire was
pointing. You can leave these motion blur effects turned off for now so that after effects run
smoother. Then after that I added the glow effect and set the glow threshold to 25% and the glow
radius to 250. I also changed glow operation to screen, glow colors to A and B, and color looping
to sawtooth A greater than B. Then I set color A to an orange shade and color B closer to red.
Then I duplicated this glow and changed the glow radius on this one to 800%. Then I added all those
same effects to the fireball layer except the exposure effect. I used the eyedropper on color A
for the glow effects for the fireball and selected inside of the structure fire so that I could match
the colors more accurately. Next what I did was animate the mask on the structure fire layer to
move away from the wand so it looked like the fire was going out. I pulled back up the mask path on
this layer and created a new keyframe right before my wife started pulling her hand back. And then I
went forward and created keyframes to have the mask pretty much completely consume the fire and
have it disappear. Then I trimmed the fire layer to end at this point too just in case the mask
didn't get rid of the fire completely. I also keyframed the position of this layer to drift
upwards slightly as it's turning off. I did this so it looks like the fire is swirling upward and
disappearing as she pulls her hand away. Next I split the structure fire layer at the point right
when the mask starts for when the fire is turning off. Then I duplicated the fireball and grabbed
that top layer. I dragged this over so that it would start at the same time as that split layer
that I just created and brought it down so that it was on top of it as well. I stacked these layers
like this so that the track mat would still be applied like how I did it earlier for the fire
elements. They need to be stacked directly on top of each other for the track mat to work.
I adjusted the timing of this clip so that the fireball extinguishes close to the same time as
the other fire. I did this by trimming off some frames and then sliding it over to the left.
Then I brought up the position on that fireball layer and reset it by hitting the stopwatch to
clear the keyframes. I then hit the stopwatch again so I could make some new ones. Then I went
through and adjusted the position to where it looks like the fireball is moving away from the wand
and then I had it move up towards the top of the frame. Next what I did here was create a mask
around the fireball layer. I made the mask the same size as the structure fire layer underneath
so they blended together. I also increased the mask feather to 20. Then I keyframed this mask
to expand and reveal the fireball as the structure fire is shrinking. This way the fireball is what's
left at the end of the effect as the light in the scene is turning off. Alright looking good so far,
just need to add a few more things. Remember that old spark element I was talking about earlier?
So I brought that into the comp, layered it underneath the null object, and changed the blend
mode to screen. Then I rescaled and positioned it so that it lines up with the tip of the wand.
I had this element start at the same time as the structure fire layer. Then I keyframed the scale
and position so that I can adjust the smoke that comes out after the spark. I did this so that it
looks like the smoke is expanding through the scene. I also brought up the opacity for this
layer by hitting T on the keyboard and keyframed it to start at 100 and then dropped it to 50%
over the course of a few frames. Next I added the lens flare effect to my main footage layer.
I changed the lens type to 105mm and set the blend with original amount to 80%.
Then I keyframed the flare brightness to start at 0% before the fire starts and then increased
it to 120% right when the fireball starts. Then I set the flare center to be over the fireball
and keyframed it to stay over the fireball throughout the scene. Once the fireball disappeared,
I made sure the flare center stayed around the tip of the flame. I didn't have to do this for
every frame, I just made sure that throughout the effect the flare center was generally on top of
the flame tip. Then as the fire disappeared, I brought the flare brightness down to 0 so it
fades away at the same time. You can do this by going into the lens flare effect on your layer
right here, then open up effects and drop down the lens flare tab. And through here I was able
to create and adjust the keyframes for the flare brightness so I could have it fade out.
Next thing I did was add an initial bright flash of light once the fire turns on.
To do this, the first thing I did was duplicate my main footage layer. I changed the top layer's
blend mode to add and trimmed it to start at the same time as the fire elements. I keyframed the
opacity to start at 0%, then went forward one frame and brought it to 100%. I wanted it to be
at 100% right when the fireball started getting a little bit bigger. Then I went forward about
9 frames and set the opacity to 20%. Then I selected these two keyframes and hit F9 on the
keyboard to turn them into bezier keyframes. I did this so the opacity adjustment is smoother.
So now doing that created an overall flash that initially happens once the fire is ignited. And
then I just made sure to fade this layer out at the same time as the fire disappears at the end
of the effect. Next thing I did was create a new adjustment layer and made sure it was stacked on
top of everything and trimmed it to start and end at the same time as the fire elements.
Then I added the Turbulent Displace effect to this layer. I used this to create the heat
wave distortion look around the fire. So I went into the Turbulent Displace settings
and changed the amount to 20, the size to 46, and complexity to 2. Then I keyframed the evolution
to begin at 0 at the start of the layer and then increased the amount to 20 at the end.
After that I created a mask on this layer that was around the fire. I keyframed the mask path
and went through adjusting it to stay around the fire for the whole shot. After going through and
adjusting the mask, I changed the mask feather to 400. Then at the end of the adjustment layer,
I keyframed the opacity so that it fades out to 0 as the fire disappears. And I also added the
spark element one more time and trimmed it to only have the smoke puff part and faded it out
a little bit after the fire disappears. I did this so that it would be left over after the fire is
gone. It's just a nice little touch at the end to have some swirling smoke. So that's it for the
effect. Last thing I did was add on a final color grade to blend everything into my scene. I also
added some fire sound effects that I found on Action VFX. They have a great free fire
sound effects pack that I use pretty often. So check that out if you're looking for some good
fire sounds. But alright guys, thank you so much for watching. I hope you enjoyed the video and
were able to learn something. Take care and I'll see you in the next one.
