How to build a Helmholtz Resonator DIY
Hello everyone, in today's video we are going to talk about Helmholtz resonators
and we're going to see how can we use them to solve problematic frequencies in our rooms.
Welcome to Hacienda Studios' YouTube channel, with us you can learn more about audio and acoustics
and solve your questions and your problems with us. In this video we're going to talk about
Helmholtz resonators, we're going to see a little bit further about what they are,
how do they work and how we can use them to solve the problems we have in our rooms.
The Helmholtz resonator consists of an enclosed volume with an opening and a neck. It is widely
used to achieve adequate absorption at lower audio frequencies. It has a great advantage in
practice because you can tune it to a problematic frequency and solve specific problems. You can
change the volume of the air cavity, change the length of the neck or change the opening area
to change the resonant frequency so in this way you can calculate the exact frequency you need
to work. This is nothing particularly mysterious, they pop up in various forms in everyday life.
Blowing across the mouth of any bottle produces a tone at its natural frequency of resonance.
Sound is absorbed at the frequency of resonance and at nearby frequencies. If you put an empty
bottle in a studio it will absorb a very narrow band of frequencies around the resonance frequency
and you will probably not notice it. The width of this absorption band depends on the friction
of the system. Adding absorbers to the Helmholtz resonator will increase the bandwidth of absorption.
In practice we design several Helmholtz resonators in a row to make a piece of furniture or a surface
as can be seen in these images. The openings can be rectangular or circular and also in different shapes.
There are some formulas to calculate these types of resonators.
We are showing the formulas here in this slide but in the internet you can find calculators though
where you can change the values and see the results. We recommend the calculators of MH Audio
that you can find in the description of the video. First it is necessary to get to know your rooms.
You need to take measurements and to know exactly which frequencies you need to work.
In our channel you can find further information about how to do this type of studies.
We already knew the frequency we needed to improve was around 100 hertz. It is also important to know
where are these modes located so where is the resonance frequency stronger because in this place
you need to locate the resonators. When you open these calculators please consider fixing some
values according to your room and vary some other values. In our case we fixed the panel width,
the panel height, the panel thickness and the depth of the airspace and we varied the hole
diameter and the amount of holes to achieve the 100 hertz resonance. So our panel width we used
1 meter. In the height we used 40 centimeters. That was the wood panel we found on the market.
The panel thickness was 2 centimeters. That was also regarding the wood panel we found in the
and the depth of the airspace was 40 centimeters according to the location in our studio.
With the hole diameters we choose 1.9 centimeters that is three quarters of an inch and in the
amount of holes we chose 83 holes. So when we calculated this we found the frequency of resonance
was around 100 hertz. Then we used some absorbent material inside the
Helmholtz resonator to increase the bandwidth around this 100 hertz.
Once we have the calculations, the design, we should make a list of materials to start building
the resonator. So in our case we purchased wood tables with the width and thickness we calculated.
We also purchased wood reinforcement for the corners. You need to buy some absorbers.
These absorbers should be rockwool or glass fiber. In our case we purchased glass fiber
to do the absorption of the resonator. You should not buy foam for these absorbers. Foam
doesn't work in low frequencies and the low frequencies that we need to treat
with these absorbers. So this material should be rockwool or glass fiber. These kind of materials
can contain a lot of dust and loose fibers. So we need to use fabric to avoid the material to go
out of the resonator with the openings. You should consider acoustic transparent fabrics as the one
you can see in the right. These absorbers can also irritate your eyes and skin. So you should
consider using protections such as glasses, face masks, gloves and special clothes before
manipulating the rockwool or the glass fiber.

