💬 Leave me a comment, DM me on Instagram, or email me at [email protected] if you have any questions.
🔗 Some of the links above are affiliate links and, at NO additional cost to you, I will earn a commission if you decide to make a purchase.
AI Generated·May contain errors
This is one Dragon Ball Z cell. And for a half hour episode,
artists made over 9,000 individual cells. Here's how they were made.
Starting with the most important part, registration. These pegboards kept every cell,
background, and sketch aligned with one another. Now, traditional animation was very complex.
I'm going to simplify it, but I will leave a video link below that goes more in depth.
Every cell made started with a hand-drawn sketch. It always started rough and got cleaned up after
being approved by the animation supervisor. These cleaned up drawings will then get colored pencil
marks indicating where the highlights and the shadow colors will go. More on that on the
painting part of this video. These colored pencils were not visible when the drawings were Xeroxed
onto cells, and only the dark pen marks would transfer. Using a Xerox saved so much time
transferring the drawing onto a cell. But because I don't own a Xerox machine, I hand-drew them onto
acetate sheets using nibs and ink. Importantly, you don't want your greasy fingers touching the
acetate sheet. Doing so, the ink will not properly stick. Using a drawing glove prevents this issue.
Hand inking cells required a very steady hand, but you also had to be very quick.
Once the inking was done, we move on to the painting. I used acrylic paint for this process.
Remember the colored pencil marks? Well, animators use these marks to paint in a thin line to indicate
where the shadows and the highlights will go on the front side of the cell. We flip the acetate
sheet to the back because all the painting will be done on the back side of the cell.
Every character on the show had a color chart. That way, the painter knew what pre-mixed color
to use for the skin, the clothes, etc. If you ever see an original cell, you will notice that the
painted side is not too pleasing. It's blotchy and messy, but what matters is how the front side
looks. So after layering the background and the cell, and finally a thin piece of glass to keep
everything flat, you can then begin the photographing process. This one frame might last
less than a quarter of a second on screen, maybe even less. Now we only need 8,999 cells to go.