HIBISCUS CARE: Summer Pruning| Feeding | Organic Tree Guard Paint

Biodiversity Blog
75 followers
12 Video Views·Nov 15, 2022
I'm Charles Malky, biologist and plant expert with Ivory Organics, 3-in-1 Tree Guard Paint,
and today we're going to be talking about pruning.
The plant I actually have behind me is a hibiscus, which is a popular plant, and most of us think
about the tropics in Hawaii when we actually have these plants.
This here is, I believe it's called the Lipstick variety of hibiscus, and then to my right
is another color which I'll show you, actually I'll pull the flower for you as well so you
can see it.
So here are the two flowers.
You can notice that this one here is more of a pinkish color, and then this one over
here is a little bit more red.
They're both supposed to be the same variety, but apparently they're not.
They're clearly different colors of hibiscus, and they've been grown in tree fashion.
As you can see, they're growing, I'll stand up here, so now I'm six feet tall and these
plants are at least seven or eight feet tall, as you can see they've grown now over a wall,
and that's what we're going to demonstrate here.
We're now in the month of August, and the goal is we're actually going to prune these
plants down.
The goal is to bring them down to a position where they'll grow a little bit more this
year, and before they actually go into dormancy, which is typically November, December, hopefully
they'll be close to the height of the wall, they'll still receive the sunlight that fits
in between our gazebo, which is above my head, and this wall, so it's a very narrow strip
of light.
Hibiscus generally like full sunlight, and these are actually thriving with very limited
sunlight and they've been doing very well here for a couple of years.
The other thing we're going to do as well is, if you take a look here at the tree trunk,
you'll notice that the tree trunk is covered with this white organic paint, and what we've
used for that is a product called Ivory Organics.
It's a three-in-one tree guard paint, just to add water, and it's a natural tree trunk
and branch barrier protection against damaging sunburn and insects and rodents for uses on
roses and fruit and nut trees, ornamental trees and shrubs, and it's a non-toxic, environmentally
safe and organic product.
It's a great product to be adding, especially at the time of installation, every plant in
your garden, and as well, if it's really hot, if you've got record high heat, you can actually
use the white color, today we're actually going to be using brown, and it's my project
this morning to basically take these two hibiscus plants and basically take these white stems
and turn them to brown, just a color preference, which is usually, you know, when customers
are buying the colors, it's again sold in white, brown, or green, and people are picking
the color that looks best, and the goal being is not so much sunburn, as it's got a pretty
good canopy, so the light's really not getting to the tree trunk, but it's offering the protection
against rodents and insects from actually getting into the tree, and we apply this just
once a year for the plant, and you can see that the white Ivory Organics tree paint is
actually still on it from last year, and now we're just going to be adding a second coat
on top of it, and we're going to see what that actually looks like.
So the first thing I'm going to do is actually mix this product, so we can actually, so we
can hopefully get together, and all the particles can absorb the water while I'm actually going
to be pruning the plant.
Organic paint powder, and it comes with this oil vial, which actually contains the defenses
against the insects and the rodents, and what we're going to do, and here's my cup of water,
what we're going to do is just take this paint powder, put this here in the bag, and add
some water, halfway, as the directions require, and then we're just going to stir that, and
you can see it's pretty powdery, I mean, just like making a hot cocoa from a powdery mix,
it takes a few minutes for it to absorb all the water, and then you can fill the rest
up to the top with water, and we're going to mix it again, so here we go, it's finally
starting to come together, and again, this is the brown Ivory Organics paint powder with
the oils and water now mixed together, and now we're just going to allow this to sit
for a couple of minutes before we start using it, in the meantime we're going to start pruning,
so here we go, so the goal here, if you can zoom in, I'm going to show you what some of
these tasks are going to be, over here, since we're growing this in tree fashion, the first
thing is we can notice that there's some growth that's coming out over here, the plant's starting
to bud over here, so we're going to remove this, so I'm actually going to do that right
now while we're talking, so we'll just take that off, and we're going to prune it as close
as we can to the trunk of the tree, the rest of the way I go up, and if you take a look
over here, we actually tied the plant about a year ago to this stake, the string has actually
worked its way, I'm going to remove a couple of leaves so you can see, but it's actually
worked its way into this tree branch, if you take a look on this side over here, you'll
actually see that that branch is actually starting to grow over the string, so if I
don't actually remove the string this year, it'll actually end up being grafted within
and into the tree, and I'll never be able to remove that string again, so I'm actually
going to remove that tie right now while I've got you looking at it, so we're going to come
in here with our scissors, try to see if I can squeeze in between here, from behind,
and I'm going to try to pull that out from in between the branches, it's really wedged
in there, there it goes, I just got it out, so if we waited a couple more months, I may
not have been able to get the string out that actually got wedged in between the branch,
and then at the end of this, we're actually going to re-secure the plant to the stake,
and eventually this tree will be sturdy enough that it won't need a stake at all, but in
the meantime, we're giving it the additional support, and now let's start pruning.
So the first thing we're going to do when we actually prune is, we want to keep the
lower branches, the goal is to still have it actually have a beautiful design, and hopefully
there's still going to be some flowers left on it when we're done, if there's any within
this zone, but all the ones that are up above, such as this, are too high, and the goal is
we want to keep everything within a four to five foot range, so we're going to bring this
all down, and here, when we start pruning, what we're doing is looking at leaves, and
cutting about a quarter inch above, and cutting at an angle, and the goal is basically, and
the reason for the angle is you want it, like if any water gets on the plant, the goal is
you want the water drops to fall off of it.
This branch here is low enough, so we're going to keep it, and then this branch again, we're
going to do the same thing, and cut just a quarter inch above the leaf, and we're just
going to continue this process.
Here's another bud, it's already starting to branch a little bit, so we'll cut a quarter
inch above that branch, and then leave the rest of it there, and now I'm just going to
go as fast as I can, and watch this.
Any branches, like this one over here, that's actually tangling in with other branches,
can actually be removed entirely, so I'm following it down to the lowest point, and I'm cutting
it nice and clean against the tree, to give it a more open canopy.
Here's another branch we just completely removed.
Here's another branch we're going to completely remove, because it's getting tangled into
the structure of the tree, and the goal is to give it an open design.
This can stay, that will come out, down, down, and here we go.
So we've got one flower left over here, and we've got a ton of blooms that are coming
out over here, at least a few more, we've got a couple more blooms up here, so we're
still going to be enjoying color on this plant.
Here's another branch, which I'm also going to remove down to here to strengthen it, and
this one here is kind of getting tangled, and we're done.
This is it, these are some dead blossoms, we'll actually clean up the plant, remove
those out, any dead leaves and stems, but you can see how quickly we've actually brought
this plant to right at the wall level, or below, compared to now, the neighboring twin
plant that's actually several feet above the wall, and the goal is, again, to keep
all of your colors within view, as when we're sitting here around the patio, we want to
make sure that we've got the colors within view and not above the gazebo level, so we've
accomplished that.
The next thing we're going to do is paint it, so we're going to stir that again, you're
going to want to stir it every five to ten minutes to make sure that the oils are actually
consistent within the paint, and here we go, and you're going to want to go as low as you
can, and then work your way back up, so you can see what natural looking paint this is
going to be, it still offers a sunblock protection, but again, the goal in this garden, or in
this location, is not so much from sunburn, it offers also protection from sun scald,
but the main defense it's offering is actually protection against any rodents, which we have
had rodents that gnaw and have actually killed some of our trees in the garden, and this
here actually has the oils that will make it distasteful, as well as protection against
insects that may dare to bore through the bark, which is actually not living tissue,
it's the outer layer, the living tissues are actually right underneath the bark, called
the cambium layer, so you can see what we've just accomplished here, and then the last
step we'll do is to re-secure it back against the stake, and that's it.
So this method that we've actually just accomplished for this, actually let me share one more thing
while we're looking here, if you come and zoom in a little closer, I just want to point
out that you'll notice that I'm putting my tie against the stake, there's some people
in gardens I've gone into, where people are supporting their trees against the stake,
and they're actually using the actual tree, and tying the knot against the tree, which
will immediately strangle the plant, but you can see again, I'm tying it loosely, I'm leaving
at least one, if not two inches, to allow growth between this year and next year, and
that here will help support the plant from tipping over, in case there's any strong gusts
of wind, while the plant continues to get stronger in this particular location.
This pruning technique can actually be used for not just hibiscus, it can be used for
any other flowering plant, any other fruiting plants, and again here we are in August, and
the reason we did it here in Southern California, we've still got another month or two of growing
season, so we're going to actually watch this plant continue to grow and continue to flower,
so we still have a lot more to accomplish.
The other thing I want to share with you is, now that we've done all this, it's now time
to fertilize your plants.
We haven't fertilized this plant in the last couple of months, and I have a video link
down below where I'll discuss the importance of actually fertilizing your plants every
three months, and the three months to be doing it is spring, summer, and fall, and because
we haven't taken care of this plant in the last few months, and we've done some pruning,
we want to actually show the plant that we care, and I'm going to show you some ways
of actually fertilizing and caring for your plant.
The first product I've got here is actually made by Grow More, and you can actually see
here the percentages on this are quite high.
The nitrogen is fair, 5%, but 50% phosphorus, and it's the phosphorus that actually controls
the blooms.
As you can see, this plant, it's actually even showing some hibiscus flowers on here,
but this is a strong, high percentage content of phosphorus, which is great for flowering
and fruiting, 17% phosphorus, but I do not recommend this product because this product
is a chemical product, and the chemical products don't feed the soil organisms that will ultimately
give your plant a much more stable and healthier life.
This is one chemical option, and the second one being here, Miracle-Gro, and again, nothing
against Miracle-Gro, as Miracle-Gro also does have their organic line as well, but this
here is also a chemical, I can actually open it, I've already had this opened here, but
you can tell that this is not an organic source.
Organic sources are derived from living things, and you can see that this is entirely chemical,
it's a glowing blue chemical product, and it does offer the nitrogen, phosphorus, and
potassium that plants love, those are the macronutrients, but again, derived from a
chemical source, but the better options are, let me show you this product first, is bone
meal.
Bone meal, as you can see here, is derived from, if I can find it here, I read it the
other day, so as you can see here, it says it's derived from bone meal, so it's actually
taken from the bones of an animal, and the percentage content is 6% nitrogen, 8% phosphorus,
0% potassium, so again, the goal when I like fertilizing my plants is to make sure I've
got a balance with numbers going across with the highest phosphorus content being, the
goal is we want this to bloom.
Another product that's also organic is, and here you can see it's Miracle-Gro making these
products, is blood meal, and what blood actually offers is nitrogen, and again, this one here
says it's derived from blood, so the blood source of an animal, and the nitrogen content
on there is 12, I don't know if you can zoom in close enough, but it says 12-0-0, so 12%
nitrogen, but that's it when it comes to micronutrients, no phosphorus and no potassium, so for your
plants that you want to just grow and not do anything else, blood meal, but the goal
is to actually mix your products and make something more like this, and here's another
product made by Dr. Earth, and Dr. Earth, it says bud and bloom, and the percentages
on here are right here, and this is actually a superior product, being it's got nitrogen
3%, phosphorus 9%, 4% potassium, it's got all of the micronutrients and it's derived
from organic sources.
What we're going to do is put a little bit around the plant, and we'll just scatter a
little bit around the root zone, and you can see there's a lot of leaf mold coming from
the surrounding plants that have actually fallen on it, and then I like just adding
a little bit of compost as well to the top, and just rake that in just slightly like so,
and then once you add water, the product is starting to work, the soil microorganisms
will come up, consume the product, and start enriching the plant.
We'll continue watering the plant a little bit later, the last thing I want to share
is that all of these cuttings that we've now taken, we can actually now turn into more
hibiscus plants, and I've got one that I've already started just before the video over
here, and this here was produced about, let me get it more in the light, but this here
was produced about a week ago, and you can see that it's already starting to bud here
in the corners, and it's in a solution of vermiculite and perlite, we dipped it in some
rooting hormone, and we've got them growing in these growing trays over here, with a variety
of other cuttings as well, including some citrus, and we've got some California native
plants, and we discussed the importance of actually growing natives, and these are our
passion fruit vine cuttings that we also did, and I'll put a link which will show you how
we did this, but the same process can be repeated for everything else as you can see here.
Anyways, I hope you've enjoyed this video, and if so, be sure to like it, and most importantly
subscribe down below, so you can be connected to all the other Ivory Organics 3-in-1 educational
gardening videos.
Thanks again for watching, and happy gardening.
