Kenneth built this 1971 F100 completely on his own, start to finish, in his home garage. No shop, no crew — just a guy who wanted a Coyote-swapped restomod and refused to wait on anyone else to build it. He brought it to GNF100 in Pigeon Forge and walked away with hardware.
The patina exterior is intentional — Kenneth was going for a truck he could actually drive and enjoy without stressing over every rock chip. Under the hood is a Coyote with a painted engine bay, loomed wiring, and a clean firewall. He used our Wilwood master cylinder kit, steering components, and front end conversion to get the chassis sorted.
Inside is where it really comes together. Kenneth ordered our full Tailor Made interior kit in a two-tone brown, paired it with Dakota RTX gauges, our 67-72 AC valance with burl walnut inserts he stained himself to match the interior, our steering column kit, seat belts, and the wood bed fuel door. The whole cab got repainted eggshell white to tie everything together.
Seeing a customer build a show-winning truck using FFG parts is exactly what this is all about. If you've built a truck with our parts, tag us or reach out — we want to put your build in the spotlight.
This is a 1971 Ford F100 shortbed two-wheel drive that this guy actually built in his own garage.
I'm going to walk you from start to finish on how he built the truck, what components he used,
and why we're so passionate about this. Let's get to it. This is a 1971 F100 two-wheel drive. This
is, as of today, an award-winning show truck. I believe that the customer, Kenneth, has gotten
some hardware for this, and more importantly, he's gotten showers of compliments from people
that have walked by it. It's beautiful, but the coolest part of it is this guy built this thing
all by himself in his garage. The whole thing, start to finish, was all the customer from cradle
to grave. It is a labor of love. I'm going to show you some of the things that he did,
some of the decisions he made, and where we were involved in the project, because
we worked with Kenneth back and forth a few different times over the years for him to
finally get to this stage where the truck is done, and he's getting all these compliments,
and people are loving it. Let's get to it. The works for us, which is the Coyote. This Coyote,
specifically, I believe, is a Gen 2. Kenneth can probably confirm in the comments, but
obviously gone to some work, so it's all painted, valve covers are painted, engine cover is painted,
intake is painted, and he's got some fun carbon fiber highlight on there. I believe that is a Gen
4 cover, so that's what leads me to be a little bit unclear about the specific year of it.
Anyways, he's got some great stuff down here. Look at the chassis. He's done the full front-end
conversion, so he's put it on aftermarket suspension. I believe it's a RideTech front
clip. Got our brake booster master cylinder kit, so he's mounted all of his brakes on the firewall,
or they should be, to use some of our steering components that went through the firewall,
and he's painted the whole engine bay, so he cleaned it up. He was going for the ratty patina
look. That's been very popular right now, but it's because dudes want to drive their stuff.
They want to be able to get them on the road, have fun with them, and not be so scared about rock
ships or something happening, so that's a lot of why people do this, but there's some cleanliness
to it, so he left some of the ratty on the inside of the hood because that looks fun,
but he patched all the holes in the firewall, painted that. Looks nice and smooth. Did the
inner fenders. He did more of a matte satin finish on the inside, so less of a high gloss,
and it turned out killer. Packaging on an engine bay is really hard. If you look, there's no wires
hanging out there. I can't imagine how much time it took him to loom all of these, wrap them,
make them look clean, put the ECU box in the engine bay. There's a lot of work that goes into
it, so up front here, got our AC condenser, which I'm going to get to in a second. It's part of some
cooler stuff that he got from us, so now as we make our way back into the cab of the truck,
this is where it gets really cool from us. Kenneth actually got our full tailor-made interior
kit from us, so what tailor-made means to us is it's a two-tone interior, or we went with some
more fun colorways options that he picked from, so this is a brown on brown, and there's a lighter
brown and a darker brown. It turned out absolutely killer. The defrost vents up on the dash pad were
painted to match, so they kind of worked into the leather nice. Of course, you have the Dakota RTX
gauges in there as well. They look awesome. He's got a Sony deck for his radio, and then he's
going to have his AC controls as well, and then he got a nice bezel to mount that in there,
so below that, you're going to see what you can barely even tell is our AC balance.
It's our 6772. It's our resin balance, so he got this from us, has the nice billet restomod vents
in there, and he put the burl walnut inserts, and he stained them so they could match the gauges,
so there's a wood theme going on here that he was trying to stick to, and it looks unreal.
He painted the whole inside of the cab, so that's where you get that eggshell white color from is
he repainted everything, and he's got a spark steering wheel. I can't remember that model
specifically. I believe it's the truss model, but apologies if I'm incorrect there. Got brand new
seatbelts from us, so he got a full cradled engraved interior from us. Got our steering
column kit that mounts up into the dash all nice. Got all of our supporting pieces, our over and
undercover, got our balance, got the wheel leather wrapped by us, so really balled out on the
interior, and then also got our gas tank, a few other things, and then our wood bed fuel door,
which is real nice because when he wants to go fill it up, just lifts that up. He'll put his gas
in there. It's capless, and then close that up, and then that's magnet so it doesn't rattle when
he drives and when he stomps on it, so anyways, awesome truck, but even cooler that he was able
to build it himself. It is such an undertaking that is hard to explain to somebody that's never
jumped into a hot rod. This is not a dealership car. This is not changing the brake pads on your
Sonata. This is not changing the engine in your Jeep. This is a resto mod. This is a start to
finish. It is way more involved than just a traditional project that somebody would do, so
he was hungry. He came in it. He tackled it. It's a labor of love. It took him a long time,
but the most important part is it's done, and now he and his family get to come to a place like
Pigeon Forge, the hub of the F100 truck, and get his flowers. Hard to get to this point, and we
he made it, and we're super happy for him, and he used a lot of our FFG products to get himself
there, so anyways, we've talked to him a lot of the show. Seems like he's super happy about it.
Otherwise, grateful for him. Seems like he had a really awesome experience, and it's super, super
fun for us to see our products and completed trucks, so we want to take more advantage of
that. If you have a truck that you've used Fat Fender parts on, put it on social media, tag us,
or reach out to us, and we'll find a way where we can put your truck in the spotlight because
it's important to us that the people that are using our parts get their flowers and people
understand that somebody that's using good stuff can build a truck that is a show award-winning
truck and take it to a show and have a good time with it, so anyways, that's all I got for you.
Awesome customer, awesome truck. Grateful to Kenneth. Grateful to his wife for letting him
be crazy enough to do this, and yeah, like, subscribe, comment. If you have any questions,
if there's anything we didn't cover, let us know, and we look forward to catching you next time.