Giant heavy machines build the bridges, tunnels, ports and mines of the modern world. In this video, we count down ten of the biggest machines in the world, all filmed in action on real job sites. From a mining motor grader and a 100-tonne bulldozer to container cranes and a tunnel boring machine, these giant heavy machines move rock, steel and concrete on a scale that is hard to believe. Number one is the SLJ900, one of the biggest machines in the world, carrying a complete 900-tonne bridge girder on its back. If you love giant heavy machines, this countdown shows how the biggest machines in the world really work, up close. Watch until the end to see why these giant heavy machines earn their place among the biggest machines in the world. Which one impressed you most? Tell us in the comments, and subscribe for more.
This video showcases ten of the world's most massive industrial machines used in mining, construction, and logistics. From giant excavators and tunnel borers to specialized bridge launchers, these engineering marvels perform tasks that are impossible by hand, enabling the creation of skyscrapers, highways, and deep-sea ports.
Bridges, tunnels, ports and mines are not built by hand.
They are built by machines most people never get to see.
Here are 10 more giants of heavy industry.
And number 1 carries an entire bridge on its back. Number 10.
The Caterpillar 24, the largest motor grader Caterpillar builds.
It weighs more than 70 tons, makes about 535 horsepower,
and carries a blade 7.3 meters wide.
Its job is to keep mine haul roads smooth.
When trucks carrying hundreds of tons drive over ruts and loose rock,
they burn more fuel and destroy tires that cost a fortune.
The grader shaves the surface flat,
shapes it so rain drains off, and clears spilled rock all day long.
The blade can tilt, swing and
lift, so the operator can cut a ditch,
push a ridge of gravel, or build a gentle slope on the
edge of the road.
In big mines, a single grader looks after kilometers
of road every shift.
Number 9. The Rotary Piling Rig.
Machines like the Bauer BG series stand as tall as a 10-story building,
and the largest of them can drill more than 100 meters straight down.
Its job is to build deep foundations. A telescopic steel bar spins
a drilling tool to the ground and lifts the soil out, bucket by bucket.
A steel cage goes into the hole, concrete is poured in,
and the result is a pile that can carry a skyscraper or a bridge.
On soft ground, a steel casing is pushed down first
so the walls of the hole do not collapse.
A big building can
stand on hundreds
of piles.
Number 8.
The Concrete Boom Pump.
The longest truck mounted boom ever built reaches 101 meters,
about as high as a 30
story tower, and it folds up small enough to drive on the road.
Its job is to put wet concrete exactly where it is needed.
Mixer trucks unload into a hopper at the back,
and powerful pistons push the concrete through
a pipe along the boom.
On a big foundation pour,
several pumps work side by side for many hours without stopping.
Before the boom unfolds,
four huge legs swing out and press into the ground,
so the truck does not tip over.
If you enjoy giant machines
like these, hit the like button.
Number 7. The Caterpillar D11,
the biggest bulldozer Caterpillar builds. It weighs about
104 tons, makes around 850 horsepower,
and its blade can push about 34 cubic meters of
rock in a single pass.
Its job is to move earth and broken rock over short distances.
In mines it pushes material to the excavators,
builds ramps, and cleans up after blasting.
At the back it carries a giant steel ripper,
a single tooth that can tear through hard
rock so it does not need explosives.
Its tracks are raised in a triangle shape,
which keeps the drive parts away from the mud
and
the
rocks.
Number 6.
The Komatsu PC-8000, one of the biggest hydraulic excavators on earth.
It weighs about 770 tons,
runs on two engines with a combined 4,020 horsepower, and swings
a bucket of 42 cubic meters.
Its job is to load the largest mining trucks in three or four passes.
Hydraulic cylinders give the operator fine control,
so it can pick or away from waste
rock.
Many of these machines run on electric motors,
fed by a long cable, and work around the clock.
The operator sits several stories above the ground,
and climbs up to the cab on a steel
staircase.
The bucket-wheel stacker-reclaimer.
You find these at ports, steel mills and power stations.
A single machine can move several thousand tons of coal
or iron ore every hour. It does two jobs.
As a stacker, it builds long piles
of material arriving by conveyor. As a reclaimer,
it turns its bucket-wheel into the pile
and feeds the material back onto the belt,
toward a ship or a furnace.
The whole machine travels on rails beside the stockpile.
Its long arm can swing and rise,
so it can reach every part of a pile as long as a football field
and as high as a house. Number 4.
The Ship-to-Shore Container Crane.
The largest ones stand well over
100 meters tall with the boom raised,
and they reach across ships that are 25 containers wide.
Their job is to load and unload container ships as fast as possible.
A trolley runs out along the
boom, lowers a spreader that locks onto the container,
lifts it, and carries it back to the quay.
a good operator moves a container every two minutes
or less. most of these cranes are built
in one piece and delivered
by ship, standing upright
on deck. the three biggest
are still ahead.
stay until the end. number three. the self-propelled
modular transporter or SPMT. it looks a flat deck
on rows of wheels but join enough modules together
and it can be a ship, a bridge, or a whole building.
Every axle can steer on its own,
so the whole platform can drive sideways,
diagonally, or turn on the spot.
Hydraulic suspension keeps the deck level on uneven ground.
One operator controls everything with a remote,
walking beside a load of thousands of tons.
It moves at walking speed, so heavy,
precise and slow is exactly the point.
Which machine has impressed you most
so far? Tell us in the comments.
Number 2. The Tunnel Boring Machine.
This one is Bertha, which dug a highway tunnel under Seattle.
Its cutterhead is 17.5 meters across,
and the whole machine weighs about 6,000 tons.
Its job is to dig a finished tunnel in one pass.
The rotating head grinds through soil and rock,
a conveyor carries the spoil out behind it,
and a robotic arm lines the tunnel with
concrete segments as it goes.
The machine is really a moving factory, about 100 meters long.
When it finally breaks through at the other end,
the cutterhead pushes out of the wall like a giant
drill coming through a sheet
of paper. And number 1.
The SLJ900-32 from China,
nicknamed the Iron
Monster. It is about 90 meters long,
weighs close to 600 tons, and rolls on 64 wheels.
It carries a complete 900-ton bridge girder.
Its job is to build high-speed railway viaducts,
It picks up the girder at the yard,
drives along the bridge it has already built,
reaches out to the next pier, and lowers the girder into place.
Then it drives back for another one.
One machine replaces a whole fleet of cranes.
It can even pass through mountain tunnels on its way,
and a single team can lay
several spans in one day. Which
machine should we cover next?
Leave it in the comments, and subscribe
for more of the world's biggest machines.