From Simple Floor Plan to 3D Perspective | Architectural Drawing Tutorial for Beginners

Architectural Sketch
1 follower
AI Generated·May contain errors
Video Summary
AI GeneratedThis tutorial demonstrates how to translate a simple 2D plan into a 3D one-point perspective drawing. The process involves creating an isometric sketch for spatial understanding, establishing a horizon line based on observer height, and projecting the volume toward a single vanishing point to create a structured architectural form.
We're going to practice drawing perspective from a simple plan.
I'll draw a simple rectangle, divide it into four parts,
and use that division to create
two projections from the rectangular volume,
one of which has a circular form.
To better understand
the plan in 3D and make
the perspective easier to draw,
I'll first draw a small isometric volume from the plan.
This helps a lot so make sure that you do it
as well. The rectangle
in the plan becomes a cube
and the circular projection
becomes a cylinder. I
use the cube to draw the cylinder just as I use
the surrounding square to draw the circle in the plan.
I'll add the
roof wall
and make
sure
to mark
the floor
lines
as well.
Now we fully understand what volume we're dealing with.
To draw the perspective,
first we draw the horizon line
and place the vanishing point on it.
the horizon line is drawn according to the observer's height
so i need to decide in advance
from whose viewpoint
and at what height i'm drawing this perspective. an observer sitting
on the ground with an eye height of one meter
or a standing observer about 160 centimeters tall.
I start by drawing the rectangle of the front elevation of the volume.
The part of this
rectangle below the horizon line is the observer's height
and the rest is above the horizon line.
that means if we consider the height of one floor
to be 320 centimeters, the horizon line at the
observer's eye height from the ground will sit
in the middle of the ground floor. now we repeat the
same four-part division we did in the plan
and the isometric drawing in this front view.
To draw the cylinder projection, we use its surrounding rectangle.
We inscribe
the upper base
semicircle inside
the rectangle.
Draw the vertical height
lines until we reach
the lower base semicircle.
We always mark the floor lines so that the details and the
doors and windows we add are placed in the correct position.
we also draw the projection at the end of the facade
with the help of lines coming from the
vanishing point. just like
that we've drawn the volume
of the plan in one point perspective.
now we just need to add details doors and windows and environment
elements so that this raw volume becomes an architectural form.
