Easy Crochet Chunky Knit Look Beanie Easiest Beanie Ever

DIY Crochet
2 followers
The beanie I'm going to show you today looks so much like knitted but it's actually crocheted.
It is super stretchy which is what I prefer and on top of that this is probably the easiest beanie
I've ever made. I'm going to be honest with you guys, the stitch we're going to be using does
take some time but with this yarn, because it's super chunky, it actually works up pretty fast.
This beanie actually took me just two days to finish and I wasn't even constantly crocheting.
I did other stuff too so it's really quick to finish and it looks great. There are a few things
I want to point out before we get started. The pattern works for any weight yarn so if you have
like weight three or four it'll work too but please note that if anytime in the video you
need reference for sizing please refer to the measurements I give you rather than how many
stitches, how many chains, how many rows I've done because different yarns most of the time you need
different chain number or row count to reach the same measurement. So let me show you the material.
So the yarn I'm going to be using today is Moda Vera Monkey yarn. This is 100% acrylic
and it calls for a 9mm crochet hook but with the stitch we're going to be using you actually
want to size up. So I'm going to be using a 10mm crochet hook. We're going to begin with
a slip knot. So make a slip knot and insert your hook and make a chain. So I chained about 40 chains
and that is about 15 inches. This is the height of the beanie including the brim part. To begin
row one we're going to chain one. In the second stitch from the hook insert your hook, yarn over,
pull up a loop and then pull the first loop through the second one. I'm going to mark this stitch.
This is called a slip stitch. Then in the second stitch insert your hook again, make a slip stitch,
yarn over, pull up a loop and pull the first loop through the second one. You want to do this
pretty loosely otherwise next row it's going to be hard to insert your hook. Next stitch pull up
a loop, slip stitch, continue doing this and as you're working more stitches you'll notice your
work starts to curl like this. This is normal, it doesn't matter what weight yarn you're using
and again you want to do each stitch as loose as you can. So work one slip stitch in each chain
and I'll see you at the end of the chain. Last two stitches here and we just finished row one.
To begin row two, chain one and you want to pull this chain a bit tighter. Turn your work,
that's the first slip stitch, that's the chain one. We're going to insert our hook in the first
stitch, back loop only. Make sure you find the correct back loop and make a slip stitch. Mark
this first stitch and from here I'm always going to mark the first stitch of the row and then we're
going to do the same. In the next stitch work a slip stitch and then you just work one slip stitch
in the back loop of each stitch. So I'm going to work my slip stitches all the way to the last
stitch which is marked. Last stitch, back loop, a slip stitch. Take off the stitch marker, row three,
chain one and pull a bit tighter. Turn your work and from here we're just going to repeat the same
thing. Work one slip stitch in the back loop of each stitch all the way to the end of the row
and you want to mark your first stitch. So work your slip stitch all the way to the last stitch
then chain one, turn from the first stitch, back loop, slip stitch in each stitch. So continue
working like that back and forth until your rose is long enough to wrap around your head.
So this is what I have so far. After two skeins of yarn, this is what I have left. I've done 76 rows
but what matters for this project is not the row count but how wide the panel is. And this stitch
is very stretchy so when you measure it you want to stretch it out slightly. So you want to first
measure your head circumference. I'm gonna do 21 inches, that's about how big my head is.
So when I measure it I'm gonna stretch it out slightly. You can see when I slightly stretch
it out it measures about 21 inches. Okay so once you get to your head circumference
we're gonna join the two ends together. Just fold it in half like this and join from this side.
We don't have a right or wrong side yet so you can do it from either side. Okay so as you can
see my working yarn is here. After I finish the last slip stitch I chain one. So we're going to
join these two ends all the way to here and then close off the top right here. So basically when
we pick up the stitches here we're going to insert in both loops like that. So when you insert your
hook you would have two loops on your hook and for the other side when you pick up a stitch we're
going to insert in the back loop only. So you'll only have one stitch on your hook. So I'm gonna
insert my hook in the first stitch like I said both loops and then I'm gonna pull this loop through
and chain one. Then insert your hook in the next stitch both loops and the next stitch on the
other side which is this one that's the first stitch that's the second one insert your hook
in the back loop only and make a slip stitch. Next stitch two loops the other side back loop
yarn over pull through slip stitch. I'll do eight of the slip stitches like this.
Okay this is the last one so this is going to be the brim and then after that you want to flip
your work inside out and then you want to switch the edges. So on this side back loop only
and the other side both loops. Make sure you get the correct corresponding stitch
and slip stitch. Next stitch back loop only and then both loops slip stitch.
And then you're going to continue doing this to the end of the round. Last stitch back loop
and both loops and then I'm gonna chain one. Next we're gonna be using a yarn needle to
close off the top. I actually think this side looks better so this is gonna be the right side
and the wrong side look like this. But it's up to you you can use either side and if you
fold up the brim it'll work for either side. This is gonna be consistent. So I got my yarn
needle ready and I'm just gonna thread through the stitches in and out like this and I'm gonna
go around the top and after that I'm just gonna sew up the opening and after that you just fasten
off on the wrong side. So I'm gonna go on the wrong side and I'm going to turn the beanie inside out
and fasten off here. I can tie these two together and then I'm gonna cut this yarn
and this is what it looks like on the right side. And then the beanie is done!
