Creworks Electric Wire Stripper #scrapmetalrecycling

Mr Geoffrey Smith
129 followers
14 Video Views·Apr 5, 2026
I bought myself an electric wire stripper. Works fine on bigger stuff but I need to persevere more with the thinner pieces.
Huh?
Hmmmm
Ahhh
Hmmmm
Huh?
Hmmmm
Vent plug
Hmm
Magnet
Yeah, yeah, hmm
So I was having a bit of an issue
And that is the cable I'm doing
It's got a bit of a twist to it
And it was going in fine
It was going in no problem at all
But then, coming out the back
It was skipping
It was going down the side of the blade
Not through the blade
So, these plates here
Are normally the ones for you to
Put on the front to guide it in
But as I'm using the dial one
There
Instead, I've fitted those other ones
To the back
So then, it will be
Guided through this way
And then guided out that way
Try and get it on a bit of a straight line
Instead of a
Shhhhhhhhhhhh
We can all go try, hey?
Well that went better
I've got those out of it
Which of course I'm going to strip
to get down to copper. Now I've got some straighter stuff, not twisty twisty, so let's put that
through, see if it makes any difference. Got a bit more straighter stuff now, see how this
behaves. That red stuff went through fine as you saw. I think it's because it was straighter.
That's fine. This white stuff is a bit like that, let's put this through, and if I get
no trouble with this it looks like I've cracked that wiggly wobbly problem.
Cut through okay, the blade does need to be down a bit more.
I've got to be mindful of these twisty twisty bits, make sure they're straighter before I
ram them in. Yeah it's a learning curve. Curve's not a good choice of word is it?
Something with a twist, curve, what can I call it? A learning bridge.
Got the twist out, and tasty amount of copper in that one. Hey, I took that back guard off
these thicker pieces, stopped it crumpling up in the back. Still got good copper out of that one.
Yeah, having a bit of fun with that. Now this machine, it helps on the big stuff,
it helps on the thicker stuff, cuts through that quite well once you've got your adjustments all
sorted out. It's very useful. I found it fiddly on the narrow pieces, it tends to
bind up a little bit on there, but tell you what, the little pieces,
I probably won't even strip them. But this, this is where it's useful. The decent stuff like this,
like the thicker stuff you saw me do, that's where it's useful. And that's the bit where
it's hard. So yes, yes, yes, fun shall be had with this. What a lovely thing.
