Creating 3D Floor Plans in SketchUp Part 1 - The SketchUp Essentials #22

Allard & Turner
24 followers
27 Video Views·Oct 18, 2022
What's up guys?
Justin here with TheSketchupEssentials.com back with another Sketchup Essentials tutorial
for you.
So this week we're going to talk about creating floor plans in Sketchup.
This is probably one of the most common reasons that people start using Sketchup.
So let's go ahead and just jump into it.
When you create a floor plan, there's a couple different ways that you can do this.
So generally you've got two situations.
You've either got a situation where you're just drawing a floor plan kind of out of nothing,
maybe out of measurements that you've taken or something like that.
And then there's also the situation where you may have an image of a floor plan and
you want to go ahead and draw that into 3D.
So we'll talk about both those situations.
So first of all, let's talk about a situation where, let's say you've got a situation where
you've got a space and you just kind of want to draw a floor plan.
So generally what I like to do is I like to draw, if I don't have an image, I like to
draw the outline of the space first.
So I like to figure out kind of what the perimeter looks like.
So let's say I've got like a 20 foot wall and then I've got a 5 foot wall.
So you can just come in here with the line tool and just kind of draw in your shapes
or draw in your dimensions.
And remember to make sure to try to draw these along the axes.
So make sure that your lines are going along the red or the green when you're doing this.
It's going to make everything a lot easier for you as you move forward.
So generally I like to go ahead and draw the perimeter of my floor plan first.
And then you can go ahead and come in here and let's say you've got a 4 inch wall.
So what you're going to do is you're going to use the offset tool once you've kind of
drawn this shape in order to create your walls.
So I'm going to go ahead and create a perimeter around this.
And to do that you're just going to tap that F key to activate the offset tool.
And remember the offset tool allows you to draw an offset off of a perimeter.
So in this case I can dictate how thick that is.
So in this case let's say I want my wall to be 6 inches.
I just click on that wall, type in 6 and hit the enter key.
And you see what that does is that comes in here and this creates this kind of wall shape
for you.
So anyway now that you've kind of got your general interior wall set you can come in
here and you can start creating spaces.
And probably the way that I would say that you want to do that is you can just use the
rectangle tool in order to do that.
So like let's say I've got a room in here and I've measured it and it's 10 feet by 10
feet.
What you can do is activate the rectangle tool by tapping the R key and select this
corner and then you can go in here and you can type in 10 feet comma 10 feet.
And that will draw a 10 foot by 10 foot rectangle right here.
And so once you've got this 10 foot by 10 foot rectangle you've kind of got your room
roughed out and so you can do that for all your different spaces.
So let's say you've got a 10 foot by 8 foot room over here.
Let's say you've got and you know if you're not being super precise you can also just
come in here and just draw a rectangle in here.
But let's say you've got a 14 foot by 8 foot room over here.
And then you've got kind of a big living space in here.
But let's go ahead and call this 12 foot by 12 foot.
So now you've got some rooms kind of roughed in here.
I'm going to move this over because this hallway is going to look kind of funky if I do that
this way.
But anyway now you've got kind of your spaces roughed out in here.
So now what you're going to do is you're going to do the same thing you did before with the
offset tool where you're going to come in here and offset everything.
And you can either offset that out or in depending on what you you probably want to offset it
out because you've set your inside dimensions here by creating this wall.
So you can just use the offset tool and just do a 6 inch offset to the outside.
And one of the things about tools in SketchUp is they retain whatever you did last.
So in this case I can double click on this space and it will do the same offset that
I did over here.
So with the offset tool active all you have to do is come over here and double click on
each one of these lines in order to quickly extrude those.
You see how I extruded all of those just by double clicking it.
And then what you will have to do once you've done this is probably come in here and clean.
You're going to want to clean up the intersections between the exterior wall and your interior
wall just like this.
And you can just come in here with the erase tool.
So tap that E key and then just kind of click and hold and drag your mouse over these.
And basically what you're going for here is you're going for kind of an uninterrupted
face.
So what you want to do is you want to be able to click on this and you see how it selects
the entire wall in here.
That's what you want it to be able to do.
So the next thing we're going to do with this is we're going to extrude this into 3D.
But the first thing we need to talk about is how we want to handle our doors.
So there's a couple different ways you can do this.
You can either come in here with the rectangle tool and go ahead and create your door openings
just like this if you want to do that.
That's one way you can do that.
And then when we extrude this into 3D using the push pull tool you'll already have a door
opening in here.
The trick with that though is it does create some kind of issues when you come in here
because you know doors go up you know three quarters the way to the ceiling and then you've
got a little piece that hangs down.
Well if you come back and you try to model that, what it's going to do is it's going
to heal your face about a million different times and it gets kind of annoying when it
does that.
But you can do that.
You can just come in here and you can just draw a rectangle piece just like this and
use push pull to kind of push everything and then erase all this and all that.
You can definitely do that that way if it's easier for you to rough in your door openings
first.
The other thing you can do, and I've found that this is a lot easier, is if you do want
to come in here and just push pull everything to its height, to the height that you want
it to be, then it's a lot easier for you to come in here and just draw your doors in and
then you can just push pull them through.
So let me back up a little bit.
So that's just, there's a couple different ways you can handle doors but let's talk about
extruding this into 3D.
So once you've got all your walls in here you're going to activate the push pull tool
by tapping the P key.
You're going to click on these walls and then you can go ahead and type in a height if you
want.
So let's say that your ceilings are 9 foot high.
You can come in here and with the push pull tool active just type in 9 foot and hit the
enter key.
That'll definitely work.
That'll extrude all of your walls to this height.
So you can see now what you've got is you've got this space in 3D.
So you've got your 3D openings and everything else.
So that's one way you can do that.
So that's the way to get all your walls into 3D.
And then what you can do now, now that we've talked about doors a little bit, is you can
come in here with the rectangle tool and you can draw your doors in this way.
So you can type in 3 foot comma 7 foot which is a pretty, 3 foot comma 7 foot.
That's a pretty common door height.
So you can come in here, you can draw your doors and then what you're going to do once
you've done that is you're going to use the push pull tool to push these all the way through
the wall.
So you can see how this gives me an offset limited option.
So that means it won't let me push pull any further than that.
If I push pull this all the way through the wall and I single click you can see Sketchup
deletes the face because it knows you've pushed something all the way through.
It's basically using that shape to cut an opening in this space.
So you can come in here and you can just draw these in.
I think this is a lot easier than coming in here and creating your openings first and
then coming back and remodeling these shapes right here.
And remember, once you draw this you can double click with that push pull tool and it'll push
pull your door through the wall just like that.
So if I do 3 foot comma 7 foot, keep typing inches instead of feet.
So if you type in 3 foot comma 7 foot, hit enter and then activate push pull, all you
have to do is double click and you can see that automatically pushes everything through
just like this.
So this is a real quick easy way to come in here and create your floor plans.
So this strategy works really good if you don't have an image.
If you're just kind of creating a shape in here.
One other thing you can do real quick is you can come in here with the dimension tool and
you can click on a line just like this and then click off of the line.
Remember don't click the midpoint, but actually click the line itself.
You see how when I mouse over a line it turns blue?
If you click on that and then move your mouse off of it and click again, you can set a dimension.
So in that way you can come in here and you can draw dimensions on top of this as well.
And this works really good and if you want to get super in depth with your dimensions
you're probably going to want to use layout.
That's Sketchup's actual layout software that like architects and people like that use to
create actual plans.
But if you're just kind of sketching something up, using it for personal use, this works
great for you.
So you can come in here and you can dimension that stuff.
The other thing you can do, and this is kind of a cool trick because you see when I turn
this to top down, you can see it's got the perspective going on.
So instead of seeing just these walls, you're seeing everything going towards a vanishing
point off in the distance.
What you can do is you can come up here to view, sorry camera, and uncheck perspective.
And when you do that, what that does is that draws everything in a straight up and down.
So everything's in more of a, it doesn't have perspective anymore, nothing goes to a vanishing
point.
It's just straight flat just like this.
So if you're trying to print off a flat view of this, you can go to a top view, turn perspective
off, and you can print stuff off just like that.
So anyway, that's how you would do this if you don't have an image, if you're just kind
of sketching something up.
And you can also come through here and do the same thing with windows and the exterior
wall.
So let's say you had some exterior windows and stuff like that.
You can definitely come in here, draw your windows, and do the same thing where you push
pull the openings and all of that different stuff.
And that works really good.
So in that way, if you want to, you can draw an entire house and then you can kind of heal
this top piece just like this by drawing lines across it.
And you could actually come in here and draw a roof on top of this building as well if
you wanted to and actually have like a real exterior view of your building.
So you can get as in depth with this as you want to do.
So that's where I'm going to end part one of this video.
This got a little bit long, so I'm going to go ahead and break it into two pieces.
The first part is going to be just drawing a floor plan without an image.
And then the second is going to focus more on bringing an image in and using that to
create your floor plan.
So anyway, if you like this video, remember to click that like button down below.
If you're new around here, click that subscribe button for new Sketchup content every week.
If you really like what I'm doing, please consider supporting me on Patreon.
Every little bit helps, even if it's only a dollar a month.
That just helps me keep bringing you great Sketchup content.
So in any case, thank you so much for watching.
I really appreciate it, and I will catch you in the next video.
Thanks, guys.
