I found a socket organizer I can sink my teeth… er, my sockets, into. I review the new Craftsman socket trays which feature some unique design features that set them apart from anything else I’ve seen.
While this video is sponsored by Craftsman, all the opinions expressed in this video and the video itself is not influenced by Craftsman at all. It’s all on me :) FOLLOW ME: https://www.instagram.com/chrisduketv/ https://chrisduke.tv
Something so simple as a piece of plastic can also be, well, life-changing
for a tool guy. Craftsman's got some new socket trays out on the market in
quarter-inch, 3-eights, and half-inch sizes, and they've got some unique design
features that I haven't seen in any other socket trays that I've seen around
in stores, online, or have used in the past, including these ones from Hanson.
These have been my go-to. I've got them in all sizes that I've been using for
years, and they're great, but the plastic is a little bit cheap so these posts or
these dowels will tend to break off. You can see I'm missing one right there, and
they've been great for the most part, but there's a whole bunch of design features
that are in these new ones from Craftsman that I really love and I've
been using for the past couple months, and I want to show you what they are.
Now, first off, like I already mentioned, they don't have long plastic dowels that
tend to break off over time, and the sockets kind of fit loosely onto them.
Instead, Craftsman's socket trays have these rubber socket holders that are
low-profile and rubber. They actually grip onto the socket really tight, so if
you shake it around or tip it over, they actually stay on pretty tightly.
They're evenly spaced out. There's easy-to-read markings. The white numbers against the
dark red background makes it really easy to see, and that font size is really nice
and big, so when you're looking into a huge drawer, a sea full of sockets, you're
able to find the one that you need very easily, as opposed to squinting and
looking at my old socket tray, where there's just this tiny number at the top
of the dowel, and it's just impossible. Or I just usually end up looking at the
front of the socket, so no more of that with these.
Now, the other cool thing that I like about these socket trays is that they
hold both standard and metric-sized sockets, so you can see there on the
bottom, you've got the standard, the step-up. There's a little bit of a raised
platform for the back row. That is for your metric, and I actually bought two of
these each for the different sizes, 1-1-1, 3-1-1, and 1-1-1. The reason is so I
could put all my shorties, the standard-sized sockets, on one tray and
put all my deeper, taller ones on another tray. They've also got excellent socket
retention, which means when your drawer is slammed, or bumped, or maybe you've got
the tray out and sitting up on your workbench, or down on the floor while
you're working on your car and someone walks by, or you, you bump it and your
sockets aren't going to go flying because of those rubber socket holders, they are
super grippy and they stay in tight. Actually, if you take the tray and lean
it over to the side, or sometimes, depending on the weight of the sockets,
they'll actually stay on those little rubber socket holders, even upside down.
Pretty cool. They've got great surface contact, so whether it's your drawer liner,
or top of your workbench, or down the ground concrete, or your wood floors,
or whatever, they're not going to slide around because of this rubber edge that
goes all the way around. There's also these indentations on the side, so it
allows you to easily pick them up and move them around, and you'll notice that
the tray doesn't flex a whole lot. I mean, it is plastic, so it will flex a
little bit, but not as much as those cheap plastic ones. So check this out,
guys. Of course, my workbench is completely smooth, flat, and clean, but
look how hard it is to move these things around with those rubber edges. Of course,
this one's a little bit easier, but, because it's lightweight, but check this
out. I just love the fact that these can go and tip over, or even go completely
upside down. I mean, gravity, where are you, man? You're not working very hard today.
So I've had these for the past couple of months, been testing them out in my
tool chest, taking them out, putting them on my workbench, on the floor, in the
truck, working everywhere, and they are pretty cool. Now, I will say that the one
downside to these is the size difference. They take up a lot more space. Just
check out the footprint between that one and this one, both 3-8ths size sockets.
This one takes up a lot less space, but the advantage is they're spaced out a
little bit more evenly, and they've got that big text, so you end up spending
less time in that sea of sockets looking for the one that you want, and that I
like better than having to deal with the cramped old-school ones that I've had
for years. Anyway, I've got links in the description. I'll catch you next week for
another one. Thanks for watching.