Chrysler's K Car: The Good, Bad & Ugly About This Revolutionary Platform

RC- Car
12 followers
AI Generated·May contain errors
Today we are going to talk about the Chrysler K
car and kind of focus in on this particular 1982
Dodge Aries and we'll show some pictures of other K cars.
Now why should we even talk about the K
car? Well the truth is that the K
car is arguably one of if not the most important platform in
automotive history and what do you mean by that you might say?
Well this is the platform that
that effectively saved Chrysler, and Chrysler was going to go bankrupt.
Had a bailout from the federal government
in the form of loan guarantees, and then they
turned around and they introduced the K-Car,
and it really was this platform that led Chrysler
back to profitability, really from the brink of extinction.
Now remember, when the K car came out in 1981,
the Chrysler had many different platforms, and
most of them were rear-wheel drive.
They had the R body, the M body, the J body, the F cars, the
All cars, they had so many different platforms.
And the idea here was to consolidate down to one platform
so that many different components could be shared,
costs could be saved.
And the K-Car platform would end up lasting
from that 1981 model year, its inaugural model year,
all the way through the mid-90s, 1995.
So it did last a long period of time
and it spawned so many different variants.
There were so many different powertrains.
Underhood in the K cars too.
2.2 liter, 2.5 liter, 2.6 liter four cylinders among others.
There were also 3 liter, 3.3 liter, 3.8 liter V6s,
various transmissions, ultra drives, Chrysler
torque flights, front wheel drive, all wheel drive,
and various wheel bases and lengths of the cars.
If you got the front-wheel drive Chrysler Imperial,
it was a longer car than as an example.
This Aries, you had the coupes, the two-door coupes, the four-door
sedans, the station wagons, the minivans, the convertibles.
It just spawned so many,
so many different variants from one particular platform.
It really is amazing.
You can imagine, like I said, that just saved Chrysler tremendous money
consolidating all the platforms that I was mentioning,
the F cars, the L cars, the J cars, the M cars,
and the R cars, the R bodies, into this singular platform.
Now let's discuss a little bit about
the styling history of these K cars
using this Aries as an example of this
because I think it's quite an interesting history.
Now, if you look at this car in side profile, it's obviously very boxy.
This is a typical three-box design.
You've got the hood, you've got the midsection
with the passenger compartment, and you have the trunk.
There is no attempt here at being a two-box design or a fastback.
This is just a proud three-box design, and that kind of worked.
Remember, this is a front-wheel drive,
transversely mounted engine and transmission vehicle,
and it has a relatively large trunk, 15 cubic feet as well.
And you have a very tall greenhouse.
Notice how tall the roofline is relative to the body.
Large glass area as a consequence, so great outward visibility,
especially with toothpick A pillars.
And if you look at the styling features of this,
notice that the fender profile is relatively flat.
It does have a slope to it,
and the deck lid also does have a very, very slight taper.
But it's almost like designers made a concession to do that.
They wanted it to be flat, but it just would look too strange.
I will say, look at the roofline.
It is almost perfectly flat.
GM really never did that.
They always had kind of a slight droop
as the roofline went rearward on their vehicles.
It got more slight on some vehicles,
but that was a very GM characteristic.
This is almost proud in its upright stance.
And so you think about the styling of this,
and you wonder, well, who would style something
like this?
If you took the badges off,
who would you think styled something like this?
I would actually contend that you might say Ford,
because remember, Ford, during this
Gene Bourdain era, you had the Lincoln Mark VI as an example.
You previously had the Panther platform cars that were introduced.
This almost looks like a mini Panther platform car,
very similar design language, and you
have the Ford characteristic in terms of it being very,
let's say the fender profile
being relatively flat and the deck lid profile
being relatively flat, and then you've got
Crease, that feature line that runs down the body side,
very similar to quite a few Fords,
but a pretty slab-sided body side.
Not really much in terms of convexity there or shape.
It's just very flat. Kind of a car that if you were a clay modeler,
you'd drag a template across
a lot of it to surface it as opposed to hand sculpt it.
And why do I say that?
And what's interesting about this car?
Well, the chief designer for Chrysler during this time frame
was a gentleman by the name of Don De La Rosa.
And where did Don De La Rosa begin his career
and spend most of his career?
Well, Ford.
And same with Lee Iacocca, right?
Lee Iacocca obviously came from Ford over to Chrysler,
and I believe he brought Don De La Rosa as part of that.
And so a lot of the design language from Chrysler during this era,
at least for the cars that were done under Don De La Rosa,
has a lot of Ford cues in it.
And I think, you know, Don De La Rosa,
I would say his styles and a lot of the cars
that he did weren't necessarily futuristic in how they looked.
They did have the...
Chrysler coupes like the Dodge Daytona
and the Laser and things like that.
Those were Don De La Rosa cars.
But they're almost retro-futuristic.
They look somewhat futuristic,
but they also have kind of these anachronistic cues to them.
And to me, that just speaks to Don De La Rosa,
as opposed to even some of the later K cars,
and of course, the first-generation LH cars,
most predominantly, that were done by Tom Gale and team.
I mean, the first-generation LH cars,
you could say, were modern, beautiful.
Wonderful.
I mean, that was really what put Chrysler on top
in the 1990s.
The K cars definitely brought Chrysler back to profitability.
They sold very well because they were really kind
of the right car for the right time.
A fuel efficient.
relatively roomy, you know, four-door sedan.
I mentioned all the previous, mentioned all the
variants that they had. It's kind of the right car for the right time,
but nobody would say that
these set a revolution in terms of the styling trend.
And frankly, I don't think that they look
as good as even the GM, the boxy GM cars of the era,
the X cars and the A cars. I think GM did
I did those a little bit better, but here you have it.
And what do I mean by GM, I think, did it better?
I mean, obviously, this is my opinion during this era.
But take a look at this rear three-quarter view of the 82 Dodge Aries.
And notice things like even the wheel lip molding there.
It's just so diminutive
and almost apologetic in the way that it's placed on the car.
And if you look at some of the GMX cars, as an example, or the A-cars,
you'll notice that those wheel arches take different forms.
On the Pontiac 6000, they're more filleted.
On some of the Oldsmobiles, the Pontiac 6000 being an A-car,
maybe we'll just pick the Buick Century as an example.
They have a bit more sculpture to them, they're round,
they're more pronounced, so GM just kind
of differentiated I think a little bit better
and took some more time with the details versus
Chrysler to think about it. I mean this would kind
of just be how you would design I think a wheel arch
just being standard. There's nothing atypical about it.
Let's look at this Aries wagon for a moment,
and another very, very boxy affair.
It's almost like every angle on this car is a right angle.
Even on the hood, look at the front here in this three-quarter view.
There's that rise to the hood,
and the form is created by a near right angle,
that intersection between where the parking lamp lens
is and where the grille starts.
Look at the hood, and it just kind of rises up.
And then goes over and then back down again.
It's just very precise, done with a ruler.
And look at the bumper, even the corners of the bumper.
They have almost no radius.
It's almost like the radius was put there for safety
so that if it impacted something a little bit off-center,
that it wasn't going to hurt it.
It's just kind of an out 90-degree turn, 90-degree turn back.
And that's just so bizarre on these.
And you don't see that on GM cars, certainly not Ford cars there.
Remember, Ford, during this time frame, at least a couple years later,
was introducing the AeroBird, the Tempo Topaz, the Taurus Sable,
completely antithetical to everything that this stood for.
So here you have a gentleman that was formerly in charge
of Ford design, designing Chryslers in the old Ford style,
kind of the Gene Bourdonnais style, and Ford, under Jack Telnack's
leadership, doing the antithesis of this, the Aero style.
And I just marvel the more you look at this.
The more you see the right angles in almost every aspect
of this design, it's pretty humorous.
GM didn't do that, even though their cars were boxy in the 80s.
This just would not be a car
that GM designers would approve, I would say.
Now let's return to this 82 Aries, and a couple things I'll point out.
Notice also that you can see here how flat that belt line is.
This is an absolutely flat belt line.
It has no rise really to it.
And, of course, the car has that tapered rear,
but again, a very Ford feature of the era.
So much so, in fact, that that flat belt line
and having that for the North American market
was one reason why the Escort, when it came out in the early 80s,
there was a different style
for the North American Escort versus the European Escort
because Ford's North America design team mandated
that it had to have a flat belt line.
That was just a Ford trait.
You notice the rear window divider here
that separates the fixed portion of the
glass from the portion that you can roll down
and how far forward it is and you might think well
that's uh that's does it looks very different from GM
and that's because GM used to place those
dividers where they looked visually appealing
not necessarily where they were functional and
made the window go all the way down here Chrysler
was trying to make this functional so that you
could actually lower uh the window uh most of the GM cars of the era
Whether it's the X cars, the A cars, the C or H cars,
you can't put the window all the way down in the rear.
It kind of goes halfway down.
So that was because GM designers wanted to place that divider bar
where it looked good and not where it enabled you
to put the glass all the way down.
By the way, back on the subject
of the right angles or the sharp angles,
take a look even at the outside rear view mirror and its form,
how sharp the angles are on the edge.
Look at where the A pillar meets the roof, how sharp that angle is.
and also where the roof meets the C pillar it's just
at least designers were consistent here
here.
and that every form every angle was pretty sharp i also enjoy
the kind of generic wheel covers or wheels i think that Chrysler
...did that so that they could interchange them amongst
the various divisions
and didn't have to spend money on a logo.
It was kind of annoying to me, though.
I always thought that you should be proud
of the vehicle that you're putting out
and you have to have some identity to it beyond just the nameplate.
But Chrysler had quite a few of the wheel covers during this era
where I think they were just trying to save money
and they didn't have a logo or they would say Chrysler on them.
Or they'd have the Pentastar logo, and that was it.
So just an interesting time frame for Chrysler,
born out of, frankly, a need to skimp and save and penny pinch.
And one last look here at the side view of this Aries wagon.
And again, that super flat belt line.
I guess one of the things that it helps,
that flat belt line along with the crease that's
accentuated by the pinstripe of this car
that runs the length of it, as well as the lower
body side molding which runs the length of it,
it does visually telegraph to your eye
that the car perhaps has more length than it really does.
It kind of takes your eye down the car as opposed to it breaking.
So maybe that was an interesting technique that designers were trying
to employ to make the car look longer than it really was.
But again, this is obviously not a large car,
certainly not in comparison to the previous generation K cars.
But, well.
I guess designers tried a few tricks in their boxy form.
Now here's where it becomes even more humorous to me because
that boxiness extends to the interior.
Again, so at least the designers were
consistent and so here we are in the interior
and you'll notice the instrument panel is just
perfectly flat no curvature
although that was in vogue for the time across i would say didn't
matter gm chrysler you'll notice that the ip top pad
is relatively short because the windshield
rake is very steep
And the designers wanted to give you the feeling of spaciousness.
So they've kind of pushed the IP forward.
It's got this forward cant to it, again, to make it feel roomy
because the lower edge of the IP versus the seating position,
there's a significant amount of distance there.
So it just gives you this visual thought
of having distance between and space,
a distance between the seat and the IP and then space on the interior.
But look at the gauges.
Look at even like all of the headlamp control there
on the left that has the picture frame
around it. There's lots of picture frames in terms of the vents.
Everything is a rectangle
or let's call it a quadrilateral. How's that?
Everything's a quadrilateral here on the IP.
Could be a rectangle, could be a square.
You have the speedometer, the fuel gauge,
the idiot lights, the turn signal indicators. They're all squares.
Just take a look here. It's so humorous.
It's almost as though the designers abhorred the fact
that this car had to use round wheels, but it did.
The shift quadrant indicator is, of course, in a rectangle.
Uh, you know, it's, it's interesting.
This is not necessarily my favorite, uh, car in terms of
style, but I have to be honest, people are going to say,
oh, you're crapping all over the K car
and Chrysler and blah, blah, blah, blah.
No, I'm just kind of commenting. It's so different from
if you look at a GM vehicle,
whether it's the interior theme or the exterior theme or a Ford
vehicle, because they were doing,
as I mentioned, the aerodynamic styling.
And Chrysler was stuck in this philosophy,
which GM was too, of making their big cars
look small, or sorry, their small cars look big,
keeping those same design cues, filling
the box in terms of the design,
have the fenders all the way out, the quarter panels all the
way out.
I think Ford actually called it fill the cube style design
because it was thought that a boxy
car that was very upright with a tall greenhouse and large glass,
that was the optimal form for a
car because you were using space most efficiently.
Of course, this was before aerodynamics and
the learnings that that brought,
namely that you'd have a higher deck lid.
as an example on the rear of the vehicle
so that you didn't get this tremendous airflow separation
and drag coming off the roof
but yeah this was what was thought to be the most efficient back
in the day and it's it's just humorous
to me again i very much respect these k cars and i'd even enjoy
kind of owning one and driving one around have to be a turbo k
car though and an upper end one
But you know what?
You have to drive what you like.
And that's what's great about vintage cars.
Enjoy what you like.
Just because you're watching this channel
and I may be apparently critical of the design,
that doesn't mean that it should preclude you
from enjoying it.
There are cars that I like that other people don't.
So have fun.
Whatever floats your boat and whatever you enjoy,
that's what this hobby is about.
And like I said, I respect the kickers.
Frankly, I'd like an early minivan.
I think it would be fun to own one of those
because they look so small today.
They're so diminutive.
And yet they're so space efficient.
They were brilliant in that.
Chrysler was generally pretty brilliant
when it came to packaging and interior space,
particularly with respect to even, you know,
Ford sacrificed a little bit of that
when they went with the aerodynamic styling.
And GM would be willing, I think, to sacrifice more than Chrysler.
As the K-Car would evolve, as I mentioned,
it spawned so many different variants.
Here you're going to see an early 90s Imperial.
And that was really the epitome of the stretched K-Car.
109.6-inch wheelbase.
The Dodge Aries we began talking about,
the coupe and the sedan, had a wheelbase that was just a
little over 100 inches back when they were introduced.
So you had nine inches more to
the wheelbase on that Imperial K car.
And it's kind of funny, Bob Lutz, who you know
is a friend, and he related to me once
that when they were developing the Imperial,
that the chassis was so flexible that if the development mules
They went over some railroad tracks or stiff bumps,
the rear doors would pop open, so they had to brace.
the underbody of the car because they had
just stretched the platform really to its
its limit but again you know a genius idea
from Chrysler overall a highly successful platform
arguably one of the most important platforms
in all of automotive history especially given
that it turned around Chrysler
and really laid the groundwork for enabling it to do those
beautiful cars in the 90s
and for those who are around in the 1990s Chrysler was at its peak.
I would say it was a highly revered company,
not only in the auto industry, but globally
just as an industrial manufacturer.
And it's too bad that with the Daimler Chrysler merger,
let's call it, or acquisition that,
you know, shortly thereafter,
Chrysler started back down its route of, let's just say, a
long series of troubles that even continues to some degree to this day.
We hope that they do well, they make it,
and it's great to have a big three in the U.S.
And hopefully you learned a little bit more about
the history of the K-Car.
Thanks again for watching.
