Bushcraft Fire Lighting Flint & Steel, Fire Piston, Ferro Rod & Bow Drill

Time To Be Traveler
53 followers
30 Video Views·Oct 24, 2022
Hi there guys, I've been out practicing a bit of bushcraft today and I thought it would be a good
opportunity to do a video covering some basic tools that are used in bushcraft to make fire
when combined with natural resources that you can find in your local woodland. Okay so here's all
the tools that I use when practicing fire making and bushcraft and I'll take you through each one.
So this is a fire piston also known as a slam rod and it works by compressing gases very quickly
inside the piston which effectively heats up gas very quickly to about 500 degrees Fahrenheit
which essentially ignites an ember. So the flint and steel, this is a common one used a lot in
bushcraft and it works by striking a piece of carbon steel against a piece of flint or any
kind of stone with a sharp edge to effectively shear off pieces of metal so they ignite.
I quite like to carry a carbon steel blade at least, this is my oppy now which I do use for
game prep but at the same time it allows me to carry a multifunctional item that does a couple
of jobs and as you can see it produces some nice sparks you obviously just have to be quite careful
because it's very sharp. This is another very common one in bushcraft and it's one we all
probably carry with us, this is a fire steel or a ferrocerium rod and it's kind of like a modern
adaptation of the flint and steel but it produces an incredibly hot spark about 3,000 degrees
Fahrenheit. It is incredibly hot and will allow us to probably ignite any one of the tinders that
the other items could use. So this is friction fire, it's a tool that grows all around us and
a very useful skill to have and it works by rubbing the two pieces of material together
to create like a charred material and reach temperatures of about 800 degrees Fahrenheit
so essentially create a coal like ember that you can blow into flame but it's great to make
yourself up as that and carry with you to practice but ultimately in this video I'll be removing
these components here which I've already seasoned and been using and I'll keep my bow and my bearing
block which are the two main components that I do carry with me a lot and see if I can find
some materials while I'm out gathering tinders to use with the friction fire set. So right here
we have one of the most basic tinders of them all, dead grass, absolutely perfect for making a nest
out of or even you can ignite it straight with a fire steel. We have some deadfall here and this
is some hybrid poplar and it's a very very good wood for a friction fire, very good for a fire
board or hearth board and also very good for the drill. So what I'm going to do is take a section
of this we can craft it into a fire board later and use it for a bow drill set.
This fallen poplar tree has been here for some time as well as providing us some
some good wood for our bow drill set. It's also got another really good use as a tinder.
I pulled this piece of bark from further down the tree but as you can see the under layer of bark
that the tree actually has on it is amazing tinder. Some of it's a bit damp
but the majority is very dry. As you can see this is absolutely perfect material
for putting in a nest or creating a nest from if you don't have dry grass. What I'll do is I'll be
selective about the bark I'm taking off of this or the inner bark and I'll spend some time here
gathering the dry stuff I can find. So what we've got growing here is some cramp ball or
King Alfred's cake and coal fungus. It has a number of names but regardless of the names it's an
excellent tinder to use and I use it quite frequently. It grows on dying ash and that's
primarily where you'll find it on fallen or dying ash trees but we've got quite a nice selection
here of it in its various stages and I'll show you how to pick the best one. So we have a variety
of cramp balls here and they're different colours. These two here are black and these two down here
are brown. Now the reason these two here are brown is because they're new fruiting bodies
and you won't really be able to get them to work as a tinder because they'll be too damp inside,
they're still growing and they'll be very very firm, very very dense and their weight will almost
be three or four times what the black ones will be if you do pick them by accident. But it's best
to leave them there because they'll eventually be a usable tinder and turn black much like these
two up here. But with these two, these are ready for the picking but one is slightly better than
the other. If you tap them you'll see that that one sounds quite nice and sort of crisp like a
hard sponge but that one there is starting to fall apart and the inside of the cramp ball has been
compromised because it's too overcooked, it's too far gone really. You probably still could use
parts of it as a tinder but if you're going to put it in your pocket or keep it for a long period
of time you want something like that. It just pops off the tree, it's very solid, it's not going to
crumble too easily and that'll be perfect for us getting going later on. Silver birch really
requires no introduction, it's an amazing tinder in wet or dry conditions but I find the best sheets
come off fallen birch. I just found another interesting tinder that you can often find
growing on branches of the more exposed areas of the woodland. So growing on this piece of oak
branch we've got a type of moss and it's called Spanish moss and you'll often find it growing on
branches that are more exposed to weather conditions on the edges of woodlands and
open canopy. But if you're living on moorland you'll find this stuff growing in absolute
abundance on trees like hawthorn and oak where it thrives in the damp weather conditions.
It gets the nickname old man's beard because you can see it growing in massive bundles like a
wispy beard. It works really well with a fire still, if you just pick it off the branch you
can collect quite a great deal of it. So even if you find a small amount just spend some time
picking it you can end up with a great deal. What we've got under this archway here is horse's hoof
fungus. It's a very interesting fungus to find, it grows on deciduous hardwoods but it's basically
where you get amadou from. What you do is you pry the fungus off the tree, you cut it open and you
take the amadou out and then you can further process it to put a spark on and it also allows
you to carry fire very easily. But it's not something you'd use straight off the tree and
these are a bit young so I don't really want to take them. I'm going to keep my eye on these and
I've got a piece back at camp that I'll show you and we can process it back there. By chance I've
come across the two plants I was looking for entangled in one. They're perfect for making a
nest out of, this is goose grass and this is dry bracken and if you have a cold from a friction
fire or any other means you can put them into the nest and easily get a fire going. But also they
work well with just a fire still. So what we've got here is a little bit more punked wood or
rotten wood on this old stump and this stuff in dry weather when it dries out is actually a really
great renewable source of charrable material much like char cloth. On my friction fire set
today on my drill I'm going to use hazel and do note there's a huge combination of wood you can
use. I just quite like using hazel on poplar. I find it produces a very nice ember quite quickly.
So obviously I can't use green wood although I have mentioned earlier you can take green wood home
and leave it in an airing cupboard, get all the sap out of it and it'll be fine but obviously if
you're out like this green wood's not going to do as much good. So you want a piece of dead
standing hazel, preferably something nice and dry that's not too far gone. You don't want it too
punky, too polystyreney, it's going to be no good. So I've found a piece here off the ground,
still got a bit of flex in it, still pretty strong. I'll check it for a straight edge
and we'll see how good it is. So what you can do now is look down the piece of wood you've got,
close one eye and see where your drill's going to be, see where your straights are and try not
to rub mud all over your neck. Looks like I can get a couple out of that. I like my drills to
be about a foot and a half long because I find it gives me better posture. So we'll get this cut up.
So inspecting this piece of wood you can see there that it's not too rotten and it's actually
very very hard, almost like as if it were green and you took it home and dried it out.
So that's a perfect piece of wood to use for the drill. For a drill I kind of ranged between about
two and one and a half centimetres in thickness. So we got some good drills out of that one piece
of hazel. The further up the piece of hazel we went to near the top, the more rotten and soft
the wood became. So we've got some decent ones, those are all a bit too short but they will do.
This one here is probably perfect for me and the wood is relatively decent.
Okay so we've been out and collected all our materials. Some of them are going to require a
bit more processing before we can make firewood like the bow drill set but we'll get that processed
and I'll show you how each material works with each tool. So we've got our nice dry piece of
poplar. I'm going to get this processed into a fireboard for later. There's one rather small
board. So we've processed our fireboards. It took a bit of time but I've got two nice little
fireboards out of that. This one is moderately damp actually, probably positioning into the wood
more than anything. This one here is nice and dry. I've cut the heartwood out because that was quite
damp so it should be ready to do some bow drill work a bit later. Also one thing to bear in mind
now you've spent all this time chopping away and burning resources is you've got plenty of nice
wood to go on your fire a bit later. So that's almost substitution for making a fire feather
if you're in dampish conditions. So processing the drills will be particularly easy. The weather's
been nice the last few days and this wood's very dry and it's already dead. So what I'll do is I'll
select the best one. That one there looks very nice and the width is perfect. That one there's
pretty good as well and I'll keep the other three for another day. So first things first,
you don't need to do this but it's just something I do, is take the bark off. The stage you want
to do now is essentially fashion the bearing block end of the drill into a point because
obviously a point will give you the least amount of friction. So once you've got a fairly decent
point there and you're happy with that you just fashion the other end slightly into
a very round sort of blunt end, a bit like a domed air gun pellet really. That will smooth
itself out once the friction gets going and that end should have as little friction as possible.
As you can see we've processed our bow drill set and I've kept some of the shavings and one here
is an ember pan but we've ended up with a few spare drills. So I'll show you a technique you
can use called feathering. This is quite a common one in bushcraft and it's often used in wet
weather and you'll see why in a minute. So taking one of the drills, I'm going to use my axe for
this one, I'm just going to split it in half just like that and then I'm going to quarter it just
like that. You can use batoning to do that. Essentially what you want to do is often use
a piece of hazel for doing feathering as in wet weather the outer bark can be very wet but the
inner wood will still be very very dry and what you want to do obviously is if you put a piece
of wood like that on a fire it's not going to burn too quickly but if you feather it you're just
going to increase that surface area and if you make enough of these it's an excellent way of
getting fire going in wet weather. So just with some of the spare material with the bow drill I've
produced a few feathers there and they're not particularly large ones but it's good to show that
in wet weather the outer of the wood's wet it's a great way of getting fine material that's dry
and a lot of surface area when you need it. So we've got two variations of birch bark here one
that I've peeled straight off the tree as you can see this was a live tree just shedding its bark
that requires real no prep work because it's very thin it'll ignite very easily so that's fine you
can keep that for however long you want but the stuff I've peeled off the dead tree it's going to
have a membrane kind of bark on the bottom that's going to be rotten and it's going to be damp and
you want to kind of improve the burn rate of the bark it's best to get that off. So this is some of
the punkwood we collected and this is also the heartwood of the poplar tree we used for the bow
drill if you remember that was slightly petrified as well. In some cases you can find punkwood so
dry that it will hold an ember quite well but really it's as I say it's a great renewable source
like charcloth that you can find and if you carry a small tin round with you you can see in here
there's some punkwood that I've prepared and all I've done is pop this in this tin
and put it in the embers of the fire and it's just charred it and you can put a spark on that
with a flint and steel or a fire steel and it'll burn much like a coal. So remember the horse's
hoof fungus we found in the archway well this is some here from a much older piece of fungus that
I found in the woodland and I've recovered a piece of it and as you can see there there's
amadou layer and obviously the older the fungus gets the thicker the fibers and generally the
thicker the amadou layer becomes but there's a few processes of making amadou workable as a tinder
and really a bit like punkwood and charring punkwood is something you do to prepare in
the future as opposed to use on the day but what people normally do is they cut the amadou out of
the fungus they boil it for a day or maybe two until the tannins all the water soluble materials
out they hammer it out flat they sometimes soak it in urine and then you see people are able to
put a spark on it very easily from a flint and steel set and that's usually the amadou you see
on a number of videos but it's it's you know it's a tricky material to work with in some cases and
it really does depend on the quality of the amadou you get from the fungus but the way I process it
is I dry the amadou out I dry the fungus out and you can see I just cut sheets of it
like this out of this piece of fungus and there we go and that's a piece of amadou and what you
need to do before you put a spark on it is you just basically fluff it up as much as you can
and you end up with sheets a bit like what I've got here of just shavings of amadou but the amadou
does need to be dry so the fungus often needs to be left beforehand you can see I've prepared a
few nests here and I've also got something that you call a raft on the far end there and that
really is just because once we get a fire going we'll put the nest on top of the raft it means
the fire's off the ground and the air can be drawn in if the ground's damp it's not going to dull the
fire and obviously I'd have a huge variation of different types of fuel wood to go on top so I
have a big handful of larch or beech twigs or smaller twigs to then hold on top and then as
the fire grows I build up and increase the size of the wood I put on so to make a nest all you
really do is just get some grass and make a small handle follow the grass out and then inside that
nest you can put whatever you want really we could probably put a little bit of this Spanish moss
we could put a bit of the poplar in a bark even put some goose grass and bracken and that would
be a very effective nest for us so we've got our process materials that we prepared earlier
for the two little fireboards and we've got the drill obviously the bearing block and the bow
were mine that I kept with me that's just one thing I'd mention I do keep a spare string set
I have pre-made and I put beeswax on the string and that really just helps with when it's wet
it just keeps the water from building up in the string and slipping on the drill in conditions
that can be a little bit damp so first things first I'm going to have a look at the size of my
drill I'm going to match it up with my board and I want it probably to be about half a centimetre
sort of in the board really so it doesn't drill its way out and slip out so I'm going to make an
incision where I can put that in now there we go doesn't have to be neat just needs to be an
indentation where the drill can spin so I've got all my components ready what I usually do with
my bow is I hold the piece towards my chest I don't want to hold on to and the part of the drill
that will be facing down faces up and then just twist there is a variation of this called an
Egyptian bow drill and I believe that just wraps around several more times
