Budget Gaming Build - Intel Core i3-2120 / Radeon HD 7750 / Rosewill Challenger - PCPartPicker
Nov 1, 2022
Hi, I'm Philip from PC Part Picker. Today we're going to be putting together a gaming build. Now
this is for a user on Reddit who is building a computer for the first time and he's doing it
with his son. Now what I've done is I've taken the part list that he has chosen and I've bought
the exact same parts. So the first thing that we have, we have our parts. Now, pretty exciting
stuff. Lots of packing peanuts. I hate these things. We've got our CPU. It's an i3-2120.
Got a coupon code for a game, which I'll give away later. We've got our power supply. I believe
this is a Seasonic. Seasonic power supply, 350 watts. Our optical drive. We have, I believe
this is a hard drive in here. We've got a Radeon 7750 video card. And at the core of it, we have
an ASRock H61M DGS motherboard. So this is going to form kind of the basis of our system. We're
going to put it all into a case. We're going to put it all into, it's kind of hard for me to lift
this up, but this is a Roosevelt Challenger case. So we'll get to that in just a little bit.
First, let's take a look at the parts that we've got. Okay, so let's take a minute to talk about
our motherboard. We've got an ASRock H61M DGS. Inside, we have our manual. Let's be honest,
how many people actually read this? We've got our IO backplate that's going to go up and insert into
the back of our case. We'll get more about that later. We've got two SATA cables. Now, one of
these we're going to use for our optical drive, and the other one we're going to use for our hard drive.
Underneath this cardboard is our motherboard. Okay, so now we're going to take our motherboard
and we're going to add the CPU and the RAM. But before we do that, I want to talk a little bit
about static electricity. So as you move around, your body can accumulate a certain degree of static
charge. When you go to touch something like a motherboard or other sensitive electronics,
there's the potential that you could discharge into that component, and that discharge could
cause some damage. So what you need to do is try to equalize out the static charge with something,
typically something grounded or something metal. There's a couple different ways to do this.
Sometimes people will wear a special strap that is either grounded or is connected to something
metal, and that will remove the static charge. Another common way is just to frequently touch
something metal, like touching the case or touching the chassis. So that's what we're
going to do today, is I'm just going to occasionally come and touch the case. So if you see that
happening, that's why I'm doing that. So first I'm going to touch the case. Then we'll remove
this motherboard from the protective plastic. Set that off to the side. All right, so we have our
motherboard and CPU socket. We've got the RAM sockets. We're going to put our video card in the PCI
slot here. So we've got our CPU. It's a Core i3-2120. I'm going to take it out as well.
I love that on the CPUs they always provide an instruction manual that I don't think anybody
actually ever reads. So we have our heatsink, and then on the side here we have our CPU that we'll
take out. Okay, so now we have our motherboard. We have our CPU socket, and we're going to remove the
latch. Flip it over, and then we'll remove the plastic cover. So you notice there's a lot of pins
here. We want to be very careful not to touch those or move those, because there's a chance
that they could get bent. And if they get bent, then that's not a lot of fun. Okay, so next we're
going to insert our CPU. Now, the CPU, if you notice, the CPU has some very small little divots
in the side here. That's kind of a key to make sure that this CPU doesn't go into the motherboard
the wrong way. So if you try to put it in this way, well, it's not going to fit. On the socket,
you'll see that there's these little pins that stick out that make sure that the CPU gets lined
up properly. So here, I'm going to put the CPU in. Everything's good. We're going to flip this lid back
over. Make sure that this part of the lid goes underneath the screw, and then we'll tighten
this down. Now, if you notice, there's a pretty decent amount of force here. And sometimes you may actually
hear it make kind of a creaking noise. It might freak you out a little bit. It's okay. The amount
of force is normal. It's just a good amount of tension that it puts on the CPU to make sure that
it holds it down properly and that it pushes up against the socket. Okay, so now we're going to
add the CPU cooler. So what we have is we have the stock CPU cooler. If you'll notice on the back,
it's got these little stripes. That is the heat sink compound that's going to go between the CPU
and the cooler. And that will help transfer the heat from the CPU onto the cooler. Now, we don't
need to put any extra of this compound down because there's plenty on the cooler already.
If you'll notice, there's four pins here. These are going to fit into these four holes.
And what we want to do is we want to line it up, put it on top, and then we'll snap it into place.
Now, there's any way of four orientations that you could put this in. So the question is,
which way is the best way? Well, there's this pin or these wires here that we're going to
connect to the motherboard. And that's going to give the fan power. And it's also going to provide
feedback to the motherboard on the speed of how fast this fan is rotating. So we want to plug that
into the CPU fan header, which is right over here by the RAM slot. So in order to do that,
we want to figure out the orientation for this fan to where this cord won't be too tight. If you pull
it too tight, what's going to happen is it's going to interfere with the rotation of the fan. So we
want to make sure that it's not too tight, but there's still room to reach the fan header.
So here, we'll plug this in. And you'll notice that there's a key on the socket and also on
the pins so that it can only go in one way. And it also is oriented in the right spot.
So we'll plug that in. Then we're going to drop these pins on top here and drop them into the
slots. So this, you can push down right here if you want to. Sometimes I find that it's easier
to pick the motherboard up and to hold it at an angle. And then that way, you can hold this in
place and apply pressure to push the pins in. Now, normally what I'll do is I'll do the opposite
corners first. So I'll do this corner, that corner. Now, it's okay if the motherboard flexes
a little bit. You don't want to flex it too much, obviously. But just a little bit of flex
is perfectly fine. All right. So now we make sure that these wires are not going to touch
the heatsink fan. We've got a little bit of slack here. Let's loosen that up. So now we're good. We know
that this fan can spin freely. Everything's ready. So now let's put in the RAM. Now, when we go to do
the RAM, you'll notice that on the RAM sockets, there's a little pin here. Now, that pin is going
to line up with a slot in the RAM. And that's going to make sure that this is in the correct
orientation. We'll pull back the latches here. Now, if we try to put it in the wrong orientation,
what's going to happen is that it'll kind of teeter-totter, and it's not going to fit in
all the way. So this guarantees that we put it in the right orientation. Now, when you do this,
you'll want to push down on the RAM a little bit and apply a little bit of pressure as it slides
into the socket. And while you do that, then you can pull the latches in. There's kind of a medium
amount of force here. If you have to push too hard, then maybe something is not quite right.
Take a closer look. But so the RAM is in. It's latched in good. So we're ready to move on to
the next step. Now, cases are always really large, kind of unwieldy to get out of the box.
So bear with me for a second while we get this open. If you're lucky, I'll edit this
out. If you're not lucky, well, it does have to wait.
All right. So open up the top, flip this guy over, and voila, we have our case.
Now, it sucks electricity. I just got shocked because I've got this styrofoam moving around a
lot. It zapped me pretty good. That's what you want to make sure it doesn't go into the integrated
circuits. Get rid of all this stuff. Okay. So we have our Rosewood Challenger case. It's an
ATX case. Should be plenty enough room for all the components we're going to put into it,
plus room that if you ever decide that you want to upgrade, you've got that too.
Take this one. And let's take a quick look inside. So to do that, we've got these thumb
screws that are on the back. Now, the thumb screws make it really easy to take the side panels off.
So we'll do that. We can take a quick peek inside to see what we've got to work with.
Okay. Side panel off. We have three and a half inch bays right here. You can see that these
are removable. So what you do is you can stick a hard drive in here or a two and a half inch
hard drive and mount it in here. It's got these nice little clips that make it easy to pull them
out and put them back in. These are also additional little rails that will mount on
to the hard drives that we can stick in here. So we're going to use these a little bit later.
We've got five and a quarter bays. These are for like your optical drives or other accessories that
may fit in a five and a quarter inch slot. We've also got a couple of three and a half inch bays
right here. We're not going to use these for the hard drives because these are a lot more convenient.
These three and a half bays also have openings on the front. So if you have accessories like
memory card readers or things like that that fit into a three and a half inch slot, this is where
you put them. All right. So the motherboard is going to go right here in the middle. We're going
to put our power supply in the bottom. Now if you'll notice, this case has a little vent on
the bottom. So this piece right here can come off. This is a dust filter. So we're going to
put our power supply so that the fan is facing toward the bottom. And then this dust filter
allows it to make sure that dust doesn't come in through the system. And then if you ever need to
clean it, you can slide this off and clean off and then put it back. We've got a number of cables
that are kind of hanging off here. Some of these attach to different fans that are in the case.
We've got a fan on the side, a fan on the top. We've got a fan in the front. All those fans are
going to get connected up to the power right here. We've got connectors for USB and a connector for,
where is that drive? So it looks like there's a SATA connection on the front. So here's a wire
for the SATA connection. We'll go in more detail with those later as well. So the motherboard is
going to go in right here. But the first thing that we want to do is we want to go and find the
I-O backplate that we had earlier. And we want to stick it into a slot on the side of the case.
So you'll notice there's a little bitty slot right here. And we're going to stick that I-O
backplate right in there. Okay, so when we put in the I-O backplate, you'll notice that there's a
series of connectors along one edge. That's going to be the bottom. So you don't want to stick this
in upside down. You want to make sure that it's going to line up with the ports that are on your
motherboard. So we're going to just line this up right here and squeeze this in. Now you got to be
really careful with these. If you're not careful, the edges on this metal can be really, really
sharp. And you can cut yourself really easy. I've done it before. Especially if for some reason that
backplate doesn't fit into the slot very well. It's real easy to slip and catch a knuckle.
That does not feel good. So we have our backplate in. So next, before we put the motherboard in,
we need to put in standoffs. Now if you look at the motherboard, you'll notice that the motherboard
has certain holes in it. So we have some holes at various points on the motherboard. Those are
going to line up with these screw holes on the case. We're going to go back to those screws that
we got with the case and we're going to find the brass standoffs and we're going to insert those
brass standoffs on the case. Now what you can do is you can put these in by hand. Just kind of
screw them in lightly by hand. The case actually comes with a tool that will make it easier
to tighten them down all the way. So even if they don't go in fully, that's okay. We're going to use
our tool to tighten them down all the way. So if you'll notice, the case came with this little bit.
And what this does is this fits over the top of the standoff and provides a phillips head top.
So that way you can tighten it down. So now we're going to stick the motherboard into the case.
Now when I was putting this in the first time, I noticed that this standoff that was in this
spot right here wasn't actually being used. So I went ahead and removed it. Now what we're going
to do is line up the connectors on the edge of the motherboard with the I.O. backplate.
I'm going to slide them in like so. And make sure that the standoffs are lined up with the
screw holes here. So we have one, two, three, four, five. So we're good. So I'm going to take this
screw. I'm going to screw it down into the standoff. Now some people will say that you shouldn't be
using a magnetic screwdriver. And the thing is, it's going to be fine. The magnetism
from the screwdriver is not going to damage anything. And it'll make your life a lot easier.
Because you don't have to worry about dropping a screw down into your motherboard having to fish
it out later. So okay, so now we are going to put in our power supply into the case.
Now you notice that there's a fan on the power supply. This is an intake fan. So it's going to
pull in cold air into the power supply. And it's going to come out the rear. So what we want to do
is line up this fan with the vents on the bottom of the case in the air filter. Now the screws that
we're going to use are also the coarse threaded screws that came with the case. Okay, so the next
step right now is we are going to install the hard drive and the optical drive. To do that,
we're first going to remove the other side of the case. The other side panel. So we're going to
take out the thumb screws. What that does is that gives us access to both sides of the drive base.
So we have this side here and this side here. Now taking off the side panel is also going to
be convenient when it comes time to wire up the motherboard. And we're going to run some
of these cables along the back side to keep the cabling a little bit cleaner.
Okay, so what we have is our optical drive. We're going to stick it in the top bay.
So to do that, first we need to remove this panel. Now in order to remove the panel, on the inside
edges, on the inside of the case, there's little tabs that you can push in on. And once we do that,
that'll free up the latch so that we can push this piece in. We'll do that for each side.
And then we can get this bay in. Next, we need to remove these. I'm not sure what you call these
things. Basically, these are tool-less adapters. Now on older cases, you would have screw holes
and you would have to put screws in in order to get the case to mount. But these, these bays,
have these nifty little devices where these go where the screws would have gone.
And then they latch into place. So it makes it very easy to get the devices in and out.
So what we're going to do is we're going to take this one out.
There's one on the other side. We're going to take that out as well.
Then we're going to go and slide the DVD drive right into that bay. Slide it until it's flush.
And then once we get it there, then we can go back with our tool-less bays.
Keep careful to line up the screw holes with the holes here. Once we do that,
we will, in theory, there we go. Then we're good to go. Now we'll do it for the other side.
Bingo. So now our optical drive is in. It's not going anywhere.
Next, let's move on to the hard drive. For our hard drive, we're going to go back to this bag
that had the rails. Two rails. And we're going to screw those into the sides of the hard drive.
Actually, it looks like these already have these little sort of pseudo screws. They're like screws,
but they don't have threads. And what we'll do with those is we will just slide those into the
screw holes on the side of the hard drive. And you'll need to kind of pop these into place.
Sometimes these have a tendency to fall out. And you want to make sure that those are in
nice and snug so they don't fall out in your case. That one's good. Now we're going to go
and do the other one. All right, bingo. So now your hard drive is ready to go. Now,
the key is that the cables and the connectors are on what's going to go on the inside part of the
case. Take this. Now this caddy right here that comes with the case, it's for a two and a half
inch drive, so like an SSD typically. We don't have an SSD in this build, so we're not going to
use this right now. You can either save this or you could leave it in one of the slots if you
want to. I'm going to take it out for right now. I'm going to stick this hard drive in the top slot.
There we go. It's all ready to go. Now let's just wire everything up.
So one of the goals when we wire everything up is try to keep everything as clean as possible.
So to do that, this case has different slots that are used for what's called cable management.
So you see there's kind of a slot here and a slot here. There's a slot on the bottom
for the power supply cables. What we're going to do is we're going to take some of these cables here
and we're going to route them behind the motherboard. So we're going to route them behind
on the back side of the case. All right, so that cleans things up quite a bit. We've also got a
case fan cord, so we're going to put that back in there as well. Now this case fan, we're kind of
stuck with this one. There's really no place good for it to go right now, so we're just going to
leave it hanging. We'll take these cables. We're going to take everything except for
this big one here, and there's another four pin connector that we're going to need right here.
Now these, I've already kind of looked ahead and noticed that these cords are really pretty short,
and so they're going to have a hard time reaching all the way up to the top of the motherboard and
also right here. Normally we would run these through the back or the bottom slot right here,
run them along the back side, and come out along one of the top holes. But for this particular case,
these cords aren't very long, and so I don't think we're going to be able to make that work.
So instead we'll just run them along the inside of the case here. But for the other
case, we'll go ahead and keep this thing clean and run it through to the back side.
Now we're going to connect up the main power connectors for the motherboard.
Now the first one is this large, gosh what is this, 24 pin connector.
And so that's going to go into the motherboard right here. Now it's got a latch on one side
that's going to fit with the outside part of the motherboard. The other connector we've got is kind
of this auxiliary CPU power. It's a 4 pin connector. On some motherboards, you'll find
that this is an 8 pin connector, but in this case it's 4. So that's going to go into this connector
right here. Now if you'll notice, this is kind of a reach. It's really, really tight. We could make
that fit. I'm going to cheat just a little bit. What I'm going to do is there's a wire tie down
here at the base. So I'm going to cut this wire tie off to give us a little bit more slack.
And you want to be really careful not to cut any wires when you do this. But what that does is that
gives us just a little bit more slack. A little bit more room to play with when we go to connect
this power cable up. So now we connect that up. We're good. You want to make sure that it's not
going to touch the fan. If you need to, you can kind of tuck it in behind the heatsink here.
We are going to run into a little bit of a gotcha when it comes time for the video card.
We're going to have to kind of scoot this down and get it out of the way. But that is just a
byproduct of this case and the combination of this power supply. This power supply, the cables
are a little bit short. But we can make it work. So now we've got the 24 pin connector. We're going
to go ahead and get that plugged in. It might take a little bit of force to get this in to get the
snap. Make sure it goes in all the way. So what we have with this case is a series of connectors
that they go to the front panel. Now we're going to go through these one by one and see what they
are. So this first one right here, the black one with the two dongles on it, this is for a fan.
This is for the fans on the top of the case. You have two different connectors. So you have this
little three pin, the small one, and then this large four pin connector. Now you can do this
one of two ways. You can either plug this directly into the motherboard or you can plug it into the
power supply. So for this one, it's the top fan. It's a pretty large one. We're going to plug this
one straight into the power supply. Now the reason why we're choosing between power supply
and motherboard is that this particular motherboard only has two fan headers on it,
but we have three fans to connect. We have a fan on the back of the case, a fan on the top,
and then a fan on the front. So what we're going to do is we're going to use the fan on the front
and the fan on the back, and we're going to connect those up to the motherboard. But for
this one right here, since we're out of slots on the motherboard, what we're going to do is hook it
up to one of these four pin molex connectors from the power supply. So let's plug this in.
All right, and we'll set this off to the side, but we'll bundle these up a little bit later and
make things a little bit cleaner. The next thing we've got is the USB connector. So this is a
nine pin connector, a little black one here. This is a USB 2.0 connector.
Now this particular case, the USB connectors, or sorry, this particular motherboard, the USB
connectors are on the bottom row. And so in order to be able to reach for this particular layout,
we're going to need to just kind of run these back through. Some cases when you're dealing
with a larger motherboard or a different type of case, you can run all the wires on the back side
of the case and keep things really clean. This particular setup, some of the cables just aren't
long enough to be able to do that. So we'll have to run some of them through the center of the
case. Now let's see, let's look at this one first. This one is the audio connector. So we have two
different types of connectors here. We've got one that's labeled HD audio, another one's labeled
AC97. So this motherboard has an HD audio connector. We're going to use this one. You
don't have to plug this one in, leave the AC97 unplugged. Now I've already tried this before.
You can't run it through this cable because it's not long enough. So instead I'm going to run this
back through. The HD audio connector is way over on the far side here and it just won't reach if
you try to run it this way. All right, so this ribbon cable with the multiple colors, what
you've got is the hard drive LED, the reset switch, and the power switch. Now for the hard drive LED,
it has, you know, it has the multiple colors. It has the white and the red. The polarity is
important. So red is the positive lead, the white is the ground lead. On the motherboard you'll find
that on the little pins there'll be a plus next to one of the pins and that indicates which one
is positive. So I want to make sure that we plug that in with the right orientation. For the reset
switch and the power switch, the polarity doesn't matter. There's no, the switch doesn't necessarily
have polarity. So you can plug it in either way and it'll be fine. Now these we're also going to
run back through to make sure that the length of the cable is sufficient. This right here is a SATA
cable and it goes and routes to the front panel. You can wire this up to one of the SATA ports if
you want to. I'm not gonna, I'm just gonna leave it unconnected right now. Okay, now we'll just flip
this case over. Okay, so we've got our connectors for the USB, for the audio, and also for the
switches. What I'm going to do is I'm going to run these along the back. These are kind of a bit of a
mess right in here. We'll clean this up with some zip ties a little bit later as best as we can.
So first thing we're going to do is I am going to find the connectors here. So if you look
real close on this, you'll see that we have a nine pin header right here. Let's see if power led and
power button, hard drive led, and reset. Now for the power led, power led we're not going to hook
up because this one doesn't have a separate power led, but we are going to hook up the hard
drive led. So you notice there's a there's a plus on the hard drive led. We're going to make sure
that this red line right here is wired up to the where the side of the plus is. So I plug that in
like so. Now for the power switch and the reset switch, the reset is on the bottom. So we are
going to plug that in like so. Now the power switch will go on the top side. Again the polarity
doesn't matter on the power switch. You can plug it in either orientation and it'll be fine. Next
we're going to find the USB connector. So if you'll notice this one has one, two, two USB connectors.
So you can choose either one of these and you'll be fine. I'm going to pick the one on the bottom
here. Next we're going to hook up the USB, or sorry, the HD audio connector. So we have HD
audio. That HD audio is the far one on the very end here. Now one thing you'll notice is that
these would generally have 10 pins, but they've got one removed. So the USB had a pin removed on
the end. This little serial port thing has another pin removed, but there's a different pin on each
one. So that'll prevent you from accidentally putting the wrong connector on the wrong
set of pins. So we have HD audio here. We've got one pin missing. That's going to work just great.
Oh wait, sorry, that's HD audio. All right, so take our HD audio connector.
This has still got the wire tie on it. I'm going to get rid of that. All right, so hook up the HD
audio connector, plug that in, and that is good to go. Now the other thing that we haven't plugged
in yet is the SATA cables. So this motherboard has four SATA ports. We're going to need to use
two of them, two of those SATA ports, one for the hard drive and the other one for the optical drive.
So we'll take those two SATA cables that came with the motherboard and I'm going to run this
along the bottom here. Let's see, plug in one of these and this is going to go
down through this slot. We're going to eventually hook that up to the hard drive.
The other one, just plug in like so, and this one we're going to run up to the optical drive. Now
the question really is if we run it through the back here, will we have enough room to make it
to the optical drive? It looks like we will. So I'm going to run this along the backside as well.
Since it looks like that cable is going to be long enough. All right, now one thing let's not forget
to do is plug in the fan. So if you notice the fan is a little three pin connector. We have a
couple different fan headers on this board. So we have one right down here next to the CPU fan.
We've got another one on the far end down here. These are both, one's labeled power fan, the other
one's labeled chassis fan. You can use either one of these and it'll be fine. So here I'm going to
plug this one in right into this slot. And then the other one we ran, let's see where it is.
So the other one is right here. We're going to run this underneath.
We'll take this three pin header right here, center, plug that in. Okay, so that is all plugged
in. Now we're going to wire up the hard drive. So we're going to take one of the two SATA cables.
One of them we're going to route back through the other side, so for optical drive. The other one
we're going to plug in to the hard drive. Now if you notice the hard drive has two
main connectors here. Really there's a third one here, but you will never use this one.
The long one here is the power connector. So the SATA power connector. This one right here is the
SATA data connection. So we'll plug that in. Now if you'll notice that there's a, it's kind of
like a little L shape. And if you look at the connector, it's also got a little L shape in
there too. So that way you know which orientation to put it in. So we want to match up this L with
the L right here. All right, there we go. Next we're going to grab one of the power supply cables.
There's these little black ones here. These also have the little L shape in it, so that way we're
guaranteed to put this in in the right way. Okay, so now our hard drive is hooked up. Good to go
there. The other thing we're going to do is since we ran one of these SATA cables over for the
optical drive, we also want to make sure that we run power. So we're going to take the other black
SATA power connector, and we're going to run that through to the other side.
And then we will flip this over one more time.
So now we're going to plug in the optical drive. So we have the power connector,
also has the L shape. So we're going to make sure that that plugs in correctly,
the right orientation. Next we have our SATA cable. Our optical drive is ready to go.
Now last but not least, we are going to plug in our video card. So first we're going to need to
remove one of the expansion slot covers. So we're going to, for plugging into this slot
right here, we're going to use the far one on the end. Take that one off. Then we'll plug our
to that slot. So you notice I kind of had to squeeze this power cable out of the way a little
bit. That's a little bit, a little bit annoying, but that's just, that's just how this one's
working. Finally, we'll put the screw back in to keep this video card anchor down. I think we're
done. Okay, so we are ready to test this out. We've got our power plug hooked up, the monitor
connection. We've got a keyboard plugged in just in case. And I double checked that the power
supply switch on the back is set to on. I'm going to boot this up and see if it works. All right,
looks like we're good. And you're going to get a message basically saying that it can't find a
boot device. And the reason for that is that we have not installed our operating system. Once we
do that, we'll boot straight into Windows and it'll be good to go. That's going to be part of a
follow-up article that I'll link to from this video.

