906. Throwing a 7 Lb Large Platter with Hsin-Chuen Lin 林新春 大盤拉坯

Hsinchuen Lin
205 followers
71 Video Views·Oct 7, 2026
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker demonstrates the process of throwing a large ceramic platter, approximately 15 inches wide and weighing 7 pounds. The focus is on the importance of wiring the piece off the wheel early to avoid difficulties caused by the clay drying and hardening.
Really quick, I throw a big platter. 14 inches for my vessel. It's a little bit more than 14 inches.
I would say maybe 15 inches wide. It's about 7 pounds of clay. After I'm done with my wider base
throwing, I usually use a wire to wire it up. Otherwise, once the base is getting dry, it's
super hard to cut through. Usually, once you are done with it, you might want to use a wire to
just wire it up. The easiest way is you hold your string and then spin the wheel slowly,
let the wheel do the job. It's very easy to wire it up and you will find out it will be much
easier. Once it's getting firmer and you wire it up again, you can remove it easily.
If you don't do that, you will find out it's super hard to get the wire to penetrate.
So I will let it dry and then do a trimming and maybe to
chattering on the inner part of the wider platter.
