5 Low Cost Greenhouse Ideas

Nature And Sunblog
99 followers
25 Video ViewsยทOct 31, 2022
Hello everyone this is Jack. In this video I'm going to cover five ways to make a really low
cost greenhouse to protect your plants in winter. So let's get started. Number one, the dome. Simply
put a wire cage on a container and then cover the wire cage using a clear garbage bag all the way
down to the container. Use a string to tie the garbage bag to the container so that it doesn't
fly away. This will protect your potted plants from cold and frost. This greenhouse hack locks
in moisture and allows sunlight to penetrate to the plants. Cost just two dollars for the cage.
Number two, plastic container. I'm using this free plastic container that you get when you
buy spinach or salad greens. Simply place this container on your small plants and this will help
protect plants from frost. This container is very easy to use on multiple small plants or just one
single desired plant. This container lets in a lot of light and you can even use this container to
protect your plants from insects and pests. And the best part, it is free. I made a video on using
this free plastic container as a humidity dome or a mini greenhouse to start seeds. Check that
video out if you're interested. I'll leave a link to that video in the description. Number three,
plastic tote. Buy a clear plastic tote. This one just costs about seven dollars. Simply cover desired
plants with this tote. This tote retains humidity very well and it is big enough to support the
growth of bigger plants. To prevent cold air from seeping in, use soil or dead leaves to cover the
sides of the tote. The tote will allow sunlight and protect plants from frost. This tote is very
efficient in locking in the moisture and retaining humidity inside the tote. Number four, pallet A-frame.
Lean two pallets against each other to create an A-frame. To cover the frame, use a plastic table
cloth cover. Simply unfold the table cloth cover and cover the A-frame. This is a simple solution
to cover the plants from top to protect from frost. You can cover the front and back as well if desired.
The plants will thrive under the protection of the A-frame. Costs just seven dollars if you can
secure the pallets for free. Just make sure the pallets are heat treated. Mark with symbol HT.
Number five, greenhouse box. You can make a box or frame of any desired size out of wood. To make
my box, I used four 30-inch pieces, four 42-inch pieces, and four 56-inch pieces. I then cut the
marked pieces. Next, I drilled a pocket hole and attached the wood with screws. I created a box that
is 30 inches high, 56 inches long, and 42 inches wide. You can make any desired shape using this
method. This gives plants enough room to grow and it is very easy to pick up and move. The dimensions
I created fit inside a four feet wide raised bed very easily. To cover the frame, I again used the
plastic table cover. I cut the pieces to cover the front and back of the box and secured the table
cloth in place. The greenhouse box is ready. Since I'm using a lot of plastic in this video, I want
to take some time to raise some awareness about plastic. I recommend avoiding plastic altogether.
The islands of garbage and plastic in the ocean all contributed by us, so I recommend using
products made from renewable sources. However, there are some times that it's very hard to
actually avoid using plastic, such as covers for greenhouses. So if you do buy plastic, buy with
an intention of reusing plastic over and over year after year. Never throw away plastic in trash. And
I've also heard that plastic added to recycled bins is not being recycled either. So that plastic
tote that I have, I'll be reusing it to store my gardening supplies and I always reuse plastic
covers as well. Next morning, the whole box is covered in frost. I could scrape the frost with
my hand. This could have been my plans. I want to test a couple of these systems and see how
effective they are. And for that, I have this Govee product, which actually records temperature and
humidity. I'm going to place one inside the system and one outside and see the difference.
Govee is a very handy product. One cool thing I like about this product is that you can set
up alerts to notify you if the temperature goes below or above a desired range. This particular
product contains two sensors that record temperature and humidity and one receiver that hooks up to the
wall and connects to Wi-Fi. The sensors are moisture resistant and good to use outdoors.
I'm placing one outside and one inside the plastic tote. I'll leave a link to the product in the
description of the video if you're interested in purchasing one. After placing the sensor,
I covered all sides of the tote with soil so that it locks in heat and humidity.
After running the system for a day, the readings are in. The plastic tote was 21 degrees Fahrenheit
or 11.6 degrees Celsius warmer during the day and 2 degrees Fahrenheit or 1.1 degrees Celsius warmer
at night. There is no big difference at night because there is no sunlight or source of heat
to contain in the tote. The humidity drops during the day and rises back up at night.
The difference is apparent in humidity retention. The minimum humidity during the day drops to 23.4%
while the minimum humidity in the plastic tote only drops to 47.4%. This is because the plastic
tote is very efficient in retaining humidity during the day. The tote retained 24% more
humidity during the day. Similarly, I tested the greenhouse box by placing one sensor outside
and one sensor inside the greenhouse box. Greenhouse box was 11.5 degrees Fahrenheit or 6.4
degrees Celsius warmer during the day and 4.4 degrees Fahrenheit or 2 degrees Celsius warmer
at night. This is a little less than plastic tote because the tote has thicker plastic to retain
more heat. Greenhouse box also retained 24.3% more humidity during the day which is comparable
to plastic tote. I really hope you enjoyed this video and I hope you can utilize some of these
greenhouse ideas to protect your plants from frost and even grow plants in cold and I'll see you in
another video.
