Meet five of the biggest wheel loaders ever built.
From the massive Komatsu WA1200-6 and Caterpillar 994K to the incredible Komatsu WE2350, these machines are designed to move enormous amounts of material in the world's largest mines.
In this video: Komatsu WA1200-6 Caterpillar 994K Caterpillar 995 Komatsu WE1850 Komatsu WE2350
See their incredible size, horsepower, bucket capacity and payload — and discover why the WE2350 is considered the world's largest wheel loader. Subscribe for more videos about giant machines, aircraft, construction equipment and engineering.
This video showcases five of the largest production wheel loaders used in open-pit mining. These ultra-class machines are designed to move massive amounts of rock and load giant haul trucks, featuring engines with thousands of horsepower and payloads exceeding 70 tons.
Some wheel loaders are big. These machines belong to an entirely different class.
Built for open pit mining, they move enormous amounts of rock in just a few passes.
Their tires tower over people, while their engines produce well over a thousand horsepower.
Today, we are looking at five of the largest production wheel loaders ever built,
and we finished with the machine Komatsu calls the world's largest wheel loader.
Number five is the Komatsu WA-1200-6, a giant mechanical drive loader built for surface mining.
Its enormous bucket immediately shows the scale, with capacities reaching up to 35 cubic meters.
The operator sits high above the ground, overlooking a massive front linkage and bucket.
Cameras and monitoring systems help cover the huge blind areas created by a machine this large.
Depending on configuration, the WA-1200 weighs around 216 tons.
Its 16-cylinder Komatsu diesel produces about 1,765 net horsepower.
That power gives it enormous traction and breakout force when digging into heavy material.
Even relocating a loader of this scale can become a carefully planned operation.
On a transporter, the WA-1200 looks more like industrial machinery than a normal vehicle.
It was designed around fast truck loading, high lift height, and a huge working envelope.
With a 23-cubic-meter bucket, it can load a 140-ton truck in only four passes.
A wide stance and long wheelbase help keep the machine stable under enormous loads.
Everything is oversized. Boom, cylinders, cooling system, stairs, tires, and access platforms.
And this is only number five. The next loader pushes the scale even further.
Number four is the Caterpillar 994K, one of mining's best-known ultra-class wheel loaders.
Its operating weight is about 243 tons before the bucket is loaded.
The CAT 3516E engine produces around 1,739 net horsepower.
Bucket capacities range from roughly 19 to more than 43 cubic meters.
From above, you can see the articulated steering pivoting the entire machine
through each loading cycle.
The cab sits high above the ground, giving the operator a commanding view of the work area.
But transporting a 994K is nearly as impressive as watching it work.
Major sections may require specialized trailers,
support vehicles, and carefully prepared routes.
From the air, the convoy reveals just how much equipment is needed to move it.
Corners, slopes, road width, and ground strength all matter when moving loads this heavy.
The loader's huge structure dominates the transporter,
while normal vehicles look tiny beside it.
Machines like this normally spend most of their working lives inside massive mine sites.
Assembly and maintenance demand heavy lifting equipment,
large work areas, and careful coordination.
The 994K was already enormous, but Caterpillar later developed an even more capable successor.
Number 3 is the Caterpillar 995, the modern successor to the legendary 994K.
At roughly 247 tons, the 995 is a true ultra-class machine.
Its CAT 3516E engine can produce up to around 1,870 gross horsepower.
But its biggest improvement is payload, not simply engine power.
In suitable digging conditions, rated payload can reach roughly 54 tons.
Caterpillar also increased hydraulic force compared with the older 994K.
Away from the mine, familiar surroundings make the machine's scale much easier to understand.
Reaching the cab requires a full staircase and elevated platforms built into the loader.
A single tire is far taller than an adult standing beside it.
The rear structure is equally massive because it must help balance the loaded front end.
CAT kept the machine close to 994K size while increasing payload and productivity.
That means more material per cycle without simply making the entire loader dramatically larger.
Beside a person, the 995 almost stops looking like a normal vehicle.
It is mobile mining infrastructure built to keep giant haul trucks moving.
Number 2 is the Komatsu WE1850, formerly known as the P&H L1850.
From the cab, enormous lift arms fill the view as the machine attacks the pile.
The standard machine weighs roughly 268 tons.
Its power system produces 2,000 horsepower.
But the drivetrain makes it especially interesting.
The WE1850 uses Komatsu's fully regenerative SR hybrid drive
instead of a conventional mechanical transmission.
During braking, electric motors can become generators and feed energy back into the system.
Its kinetic energy storage system can reuse captured energy when peak power is needed.
That technology supports fast loading cycles while reducing energy normally lost during braking.
The standard rock bucket holds nearly 33 cubic meters of material.
Its standard rated payload is almost 59 tons in a single bucket.
That load explains the huge tires, wide stance, and heavily reinforced frame.
Each cycle combines digging, steering, lifting,
braking, and precise bucket control in seconds.
Repeated for hours, those cycles can move thousands of tons during a mining shift.
The WE1850 is enormous, but one Komatsu mod sits above it in overall loading class.
Number 1 is the Komatsu WE2350, formerly the P&H L2350.
Komatsu calls it the world's largest wheel loader,
and standing beside it explains why.
Put a normal road truck beside the WE2350, and the size difference becomes almost ridiculous.
In standard lift form, it weighs roughly 267 tons and produces 2,300 horsepower.
Its standard bucket holds about 40.5 cubic meters and completely dwarfs a person.
The headline figure is payload, more than 72 tons in a standard lift bucket.
It is designed to work with ultra-class haul trucks in the 320 to 400 plus ton range.
The rear cooling and power systems are enormous
because they support continuous heavy-duty production.
Even empty, the machine carries hundreds of tons on four gigantic mining tires.
A worker beside the loader barely reaches the central area of one wheel.
At the front, the bucket and linkage are built to survive repeated impacts with rock.
Despite its size, it must still steer, reverse, position precisely, and cycle quickly.
Its bucket size, payload, horsepower, and truck-matching ability
put the WE2350 in a class of its own.
Which giant wheel loader impressed you most?
Comment below and subscribe to MechMagnitude for more extreme machines.