Please note I´ve made a wrong "section-sketch" in some of the muffler v3 videos (the ones with sketches as guides) - the righthand side sketch has to be on an angled plane and you need a different intersection curve to make it tangent to. Sorry, just noticed it while I was doing the autocad version.
Very similar to inventor - enjoy! You can download the part and the drawing from my grabcad account. - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This video tutorial demonstrates how to model a muffler using Fusion 360. The instructor guides the viewer through a complex workflow involving 2D sketching, 3D splines, surface lofting, and stitching to create a precise mechanical part, mirroring a similar exercise previously done in Autodesk Inventor.
Hi, welcome to a Fusion 360 video tutorial.
I want to do that muffler exercise now in Fusion 360
and it's very similar to the inventor version.
So let's have fun with Fusion 360.
Okay, let's start with the sketch on the XZ plane,
which means the top plane.
I need a rectangle 300,
so this
would
be 300.
Value
would
be 400.
Align this if possible,
as I remember there is no midpoint snap,
so I have to do it in a different way,
go for symmetry,
those two symmetric to this one,
those two that one.
I need a line, trim this,
trim, add a dimension
from this point
to that line.
This should be 280, another one from this point to that line.
And this should be 180.
let's
add some
fillets.
repeat
that
command.
last one.
i will
need
here a
construction
line.
so let's go for a line here. can i snap on?
oh there it is. there is the midpoint. yes.
it should
be rectangular. yes. and dimension doesn't
really matter. so let's go for 50.
this should
be a construction
line. finish that sketch. we
do a draft or taper.
Nope. So I want
to go for a sweep.
Let's do another sketch
on that. Go for create.
Project.
This into the sketch.
Length might be 40.
The angle would be 88.
So I've got two degree.
Finish
that sketch. Let's do a sweep.
This will be the profile.
I want to go for this path here. Confirm.
Next sketch would
be on that plane here.
This will be a circle, millimeters 600.
This origin point
and that point should be aligned.
And the distance between this
should be 210. Add
a construction
line over here,
horizontal
aligned,
dimension
maybe 20.
Then go for a trim.
This should be removed and this should be removed.
finished that sketch. let's make a symmetrical
extrude with that sketch here to go for symmetry
and the whole length
should be 150. okay
now i need my section
sketches. let's start
the sketch
right here on that plane.
let's bring in intersect
this surface
that surface over here
It should be construction element.
Okay,
I'll go for
tangent arc.
This one should
not be action.
Change that afterwards.
Okay, let's make those two construction elements
and add
tangency.
Finish this sketch.
Next sketch is on that plane here.
And again, bring in
intersect this one.
It should be construction element
on this surface here.
This one.
Again, you could hide
the bodies for the moment.
Arc this, and again I forgot
to switch back to normal mode.
These tangent finish
this sketch as well.
Now I need plane,
not with a distance,
but plane angle,
though that would be the axis.
Zero degrees, that's okay.
Let's do a sketch right there, but bring back the bodies.
Go for a sketch on this one.
this surface
and this should be for construction.
confirm. activate this and let's make
tangent arc. point
to that arc. finish
the sketch. now i want
to make a 3d spline through
that point.
through those points. so go for another sketch. maybe use
this plane. activate 3d sketch.
Go for a spline.
Let's start here.
To this one.
that one and this one. right
there. finish
this sketch. now i want
to use this curve somehow
to trim the body here. therefore we'll project it
into a sketch of that plane. the sketch right there.
i want to include this geometry
in the sketch to project it. so go
for project include. project
This curve.
Now let's hide and...
this sketch, yes. let's make an extrude
with that one. finish that sketch. let's go for an extrude.
use this sketch here.
visible. the bodies.
trim. with that
tool. this should
be removed.
hide that body here.
okay. could hide. next
step. i want to split
those surfaces. so go
for modify.
go for
Split body or split face.
The splitting tool would be first.
one of those planes,
so let's start with that one here,
want to split this face and of course
that face, this face,
then do another split,
this plane here, so
that would be the tool,
this face, that face,
this face, face, one,
another split with here,
repeat, split face,
This face, split it with.
That plane?
So let's see if we can work with those
section sketches and splitted faces.
Let's go for a loft.
A loft. And I want to add
this edge here, make a tangent
This chain here.
Go for tangent here
here.
And there
is an option
here. Tangent
edges.
Confirm. Very nice.
This sketch.
But the sketch go.
That's one. The other.
Let's try this side.
So go for another loft,
this edge, plus these, yes,
go for nice, the rails,
that would be this one,
it would be nice to go for the edge
here, not the sketch, but the edge.
So let's go for plus,
there is no sketch at the moment,
if possible,
and try to select this edge, because that's better,
and go for tangency here, take a look.
Yeah, this looks better. Confirm. Very nice.
Maybe change that display setting to
shaded with visible edges. Looks good.
Now let's go for this part here.
Bring back the sketches.
Repeat the loft command.
Select this edge here.
It should be tangency.
Go for another one.
The one that would be here, that small edge, add this one, that one.
This one, again go for tangency, switch back,
so go for tangency, now hide, first maybe
go to this sketch here, then hide the sketches,
select here that edge, another rail, here,
great,
and let's go for tangent,
works, better option,
let's reverse
the normal here, very
This is the most troublesome area.
Now another loft.
Use this edge.
These edges here. Great.
Go for tangent. Tangent.
This would be of edge here.
This edge here. Great.
Go for tangent. Tangent.
Last sketch rail.
This one. You see.
Other option and confirm.
And again this patch here.
Great. Now I can stitch
them all together.
So go forward.
Stitch, this body, that body,
this body, that one, this one,
that one, confirm, very nice.
So maybe hide those sketches,
and I need another plane
that should have an offset from this
one, minus 230, need
a sketch from this plane,
let's see if we can do an arc,
no, let's go
for a circle, it's easier to do,
meter should be 56 millimeter.
I need
a construction line
to trim this one.
Trim too
much,
that's
okay.
Finish that sketch.
Let's see if we can trim that surface
similar as in Vento, is that possible?
Yeah, but it will go all through.
But it will go all through anyway.
So a split would be better.
Or let's do that extrude here
and go to an object, to this object here.
Confirm.
Now let's trim.
I want to trim with that tool and I want to remove this one here.
Confirm.
And stitch.
OK.
Fillet.
Hereby.
25 mm.
I need another
plane.
That would be, see, along a path.
Yes.
Path would be this one.
And, yeah, if that would be a defined length,
I could go a certain distance.
So, let's check that sketch.
Sketch 1.
So that's 50.
And I want to go for 30 distance,
so let's make this 30, finish that sketch.
If I now do that plane along, so that would
be the path, and the distance type would be,
I suppose, yes, proportional distance 1,
so it's at the end, so it's 30 millimeters away.
Great.
Now for a sketch right there,
circle, the diameter
of this circle would be 106.
Finish that sketch, let's make
an extrude in that direction,
length, make it say minus 80.
Now there's no switch,
so I have to go
for minus 80.
I can trim, this will be the tool
that should be removed.
Okay, hide that body here,
plane and do another sketch.
That will be a
circle, 56 diameter.
Finish that sketch, let's do an extrude.
Should be minus five.
Trim this one with that plane,
convenient.
And let's see if we can do, take
a look at those boundaries.
So let's hide that sketch.
If we do now a loft, we will see what will happen.
So a loft
should
start here,
there.
So seems I've missed one here.
So then this one should be there as well.
And that didn't go well.
delete this one,
go here and select this edge as next and then this one and that
seems to be a nice boundary here,
so no need to add something. Let's go for
tangency and here go
for tangency as well.
Okay, confirmed.
Quite nice. Let's stitch
I'm going to stitch those bodies together with the first stitch.
This one.
That one.
Let's do a mirror.
It should be here, so it's there.
Mirror. I want to mirror faces, but the body.
The mirror plane would
be plane here. Confirm.
Stitch once more
and I'm done.
So I hope it was helpful.
Hope you enjoyed this one. So sorry,
there's a little problem here.
Yeah, so maybe we
should go before
the mirror.
Trim this one. I think it's a little bit to the side.
Circle for a trim. Use that plane as tool.
Some small, see some very small edges.
Here, this should be removed. Probably the same over here.
If we mirror this one, should be okay.
If we stitch this,
or is there also a problem? No,
there should be not a problem, because that's just the fillet.
So let's go for another stitch.
Select this one and that one.
That's still yellow
and there's still a problem.
So I have to go for rails
because here's not a problem.
Or is there also a problem?
Oh yeah, there's also a problem on this side.
So maybe, just maybe go before the mirror
to that trim command
and take a look here as well.
There's also a very small
which should be removed
and here as well.
I should be able...
Move this in that direction.
Could have gone for rails as well, but, again, this was helpful.
Hope you enjoyed it. If you did,
please give it a like or leave a comment.
If you want to see more, please give it a like or leave a comment.
Please subscribe to my YouTube channel.
Please subscribe to my Facebook fan page.
Would be very nice of you.
I want to get more likes and subscriptions over there as well.
Thanks for watching. See you to the next one.