Please note I´ve made a wrong "section-sketch" in some of the muffler v3 videos (the ones with sketches as guides) - the righthand side sketch has to be on an angled plane and you need a different intersection curve to make it tangent to. Sorry, just noticed it while I was doing the autocad version.
Sadly the fillet command didn´t work despite the "hold line" option, so I went for a loft - enjoy! - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This tutorial demonstrates how to model a muffler in SOLIDWORKS 2019-20. The instructor explains why a lofted surface approach was chosen over the face fillet command to achieve the desired geometry, guiding the viewer through the creation of complex sketches, surface lofts, and final body knitting.
Hi, welcome to a SOLIDWORKS 2019-20 video tutorial.
The Muffler exercise in SOLIDWORKS I went
for a loft because the fillet command with
the face fillet option didn't work,
although or despite having a road line option.
The preview looked pretty well
but in the end it didn't work.
So I went for a loft. Let's have fun with SOLIDWORKS.
Let's start with a sketch
on the top plane.
That would be a rectangle
and I could go for this one.
That
should
be 400,
300.
Okay, let's add
a line for the trim.
Trim it, dimensions,
this would be 180.
That one should
be 280.
So that's still not fully defined.
Let's take a look.
See, it's not fixed.
Therefore, I want to align this one
Midpoint here, horizontal, and that should do the trick.
Now let's add some fillets,
90mm here, another one here,
which should bring
the model back
to
center,
there,
here.
Then I want to add
a construction line,
construction only,
and that midpoint here
should be aligned,
move it a little bit,
okay, make it first
perpendicular,
that midpoint here,
there you
Sometimes it's really annoying.
Okay, let's try once more.
There you go.
Second one,
coincident.
Pension of 60 millimeter.
Close and leave that sketch.
Can we do an extrude
with a draft?
Let's see.
Aloft extrude.
Is there an option for a draft?
Yes, it is.
So the length should be 40 millimeters.
Draft should be two degrees.
Let's see.
Confirm.
Another sketch.
Right plane I suppose, yes.
This should
be a circle.
It should
be 600.
The distance between this point,
center point,
should
be 210.
Of course, those two points
should be aligned vertically.
Construction line, got to trim this.
No
full
trim.
Yep, one more dimension.
This could be maybe 20.
Leave that sketch and make a symmetric extrude.
With that sketch, mid-plane,
I make it 450, confirm.
Let's bring back that sketch,
because I need plane,
which should be aligned here, so I might go,
let's see what's up,
plane, first reference
could be that line, second reference
could be the top plane, then I go for 90 degrees,
so it's perpendicular, that's okay, and confirm.
To do my section sketches.
Let's start with the front plane sketches.
We need to bring in some surfaces.
So go for intersection curve,
that surface here,
this surface,
and that's
confirmed.
Let's hide
those surfaces,
make these elements
for construction only.
Then add a tangent arc,
this point to this one,
this here.
Tangency.
Tangent. Tangent.
Confirm. Confirm.
Leave that sketch.
Let's bring back those surfaces
and go for the right plane sketch.
Bring
in this one here.
This surface
and that surface.
Confirm. Confirm.
Hide
those faces.
Destruction
only. Tangent
on this side.
On the other
side.
Snapping the tangency here.
by intention.
So, because I want to make sure it's really tangent,
so this one and that one should be
tangent.
Same on the other side,
this one and that one should
be tangent as well.
Okay, now for the last sketch that would be on this plane.
Bring back those surfaces,
again sketch this plane here,
and bring in, check it out, this
this surface here and of course that one
Confirm.
Hide those surfaces as before.
This one and that one for construction only.
Engine should go
from frequency
between those two.
Confirm.
Leave sketch.
In order to make some sort
of surface here,
I want to do a sketch on the top plane.
Okay. And I want to bring in those endpoints of those arcs.
That would be, turn it a little bit, this point here.
That point, this one, that one,
and of course this one. Confirm.
I could hide those sketches,
especially, okay, this one as well.
Now I want spline, which goes
through those points. So go
for spline, second point,
third point, fourth, last, and fifth
point, like this, and confirm.
And I missed this one. Great.
Let's try once more.
That's more like it, I am confirmed.
Let's make an extrude with this one.
Extrude.
Okay, and that might be,
let's take a look at that surface.
90, so let's go for 100.
That should do.
Confirm.
Bring back surfaces.
First this one.
Trim.
Surface.
That's the tool, and I want to remove this side here.
Confirm.
Hide that surface.
And bring back first extruded surface.
I could show you the preview of that face blind,
which works quite well.
Didn't work. I loft.
So let's bring back those sketches,
because I need those as
cross sections or guides.
I used these cross sections and
those for guides.
And I had to go for two lofts, because
otherwise it wouldn't work. So let's start with a loft surface.
First cross.
Second
one,
third
one, this
up there
as well.
Now the guide
curves
to manager, that
would be here.
The second one would be just down below.
We go
for selection
manager
and select
those edges.
It's pretty good.
Now let's go for normal to profile for start and end.
For this guide,
tangency to face
for that guide.
Let's confirm. Great.
Now the second loft.
You could go for the edge
or for that profile.
Doesn't really matter because I
made it perpendicular to that one.
But go here and select other.
Sketch, sketch, four part. No, I want the edge.
It's not available. That's great. Let's move here.
Select other
with the edge and go
for this sketch arc.
That's sketch arc.
Over here, select the edge,
I click select other, looks okay.
I'll go for the guide curve, that would be this one.
The second guide curve, go for the selection manager
and select those edges.
This one, that one,
this one, another one,
this one, that one,
and last one here,
confirm.
Now add tangency here,
takes a while, but seems to work.
another tangency over there. great. and then go
to the edges and add tangency to the faces as well.
confirmed.
nice. i
could hide
the sketches.
which should
be that one.
this one
that here.
need a plane with an
offset to the right
plane. so go for a plane.
the first reference would be the right plane. yes.
I want to flip the offset and the offset should be 230.
Confirm. Let's make a sketch on that plane
here. This would
be a half circle, so I'll go
for a circle and then trim it.
I'm at 56. I have to
dimension it
anyway. Okay. Lick.
That would be 56.
Line
for construction.
Trim.
Leave that sketch.
Make an extrude.
And this one.
And that should go up to this face, but it doesn't really matter.
Let's go for year 50.
Then I want to make
the face face fillet.
Let's hide that plane fillet.
Face face, yes.
First face would be this one.
It's in the wrong direction. It should point outwards.
Second surface would be this one.
And the arrow should be upwards.
The radius should be 25.
It should work.
Nice. Now let's move
to this side
to see sketch one.
That plane here,
a new plane,
point as reference,
and that line
as reference, confirm.
Sketch right there,
that would be a circle.
It should be 106,
and this should be aligned,
but it isn't.
So can we snap onto that?
No, it's not automatically projected,
or I deleted it by accident.
So let's go for intersection curve and see if we can.
No, we can't,
there's no point here,
but I should be able
to mention them, no.
So how to get that line into that sketch?
Convert entities, can't select the point,
let's try it like this, that's not possible.
That's really,
really this point, it's there.
Now it's there, okay, now I can select it.
Somehow he projected it into the plane,
even said it couldn't do it,
that circle.
Trim. Trim surface.
Of course first maybe I should stitch
those or combine those.
So go for knit surface. This one.
This one and that one. Confirm.
Now I can trim. And this is the tool.
And the inside should be removed.
Confirm. Let's hide that sketch
or I will need it to my second circle.
So go for another sketch
on the same plane. The circle.
The
diameter
should
be 56.
It's
not aligned.
It's aligned in that direction, obviously,
but it should be aligned in the other direction as well.
So I could use that sketch here as reference
and make
those two circles just concentric.
Leave that sketch.
Nope, the half a circle.
So I need a line for construction to trim that circle.
Trim,
sketch.
Let's hide this sketch here,
make an extrude sketch here,
and this should be five millimeter.
Change the direction.
Now I can go for another
loft cross section
with the selection manager.
This would
be the second one.
Then add tangency
to face
and tangency to face.
Knit those surfaces.
Mirror that.
Features mirror.
That would be a body,
and the mirror plane would
be the top plane,
confirm, and then knit
those two together, and I'm done.
So I hope this was helpful, hope you enjoyed it.
If you did like it, please give it a like or leave a comment.
If you want to see more, please give it a like or leave a comment.
Please subscribe to my YouTube channel,
please subscribe to my Facebook fan page, would be very nice of you.
I want to get more likes and subscriptions over there as well.
Thanks for watching, see you to the next one, bye bye.