Please note I´ve made a wrong "section-sketch" in some of the muffler v3 videos (the ones with sketches as guides) - the righthand side sketch has to be on an angled plane and you need a different intersection curve to make it tangent to. Sorry, just noticed it while I was doing the autocad version.
The surface itself is quite easy to create, but the sketches are sort of tedious to do- enjoy! - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This video tutorial demonstrates how to model a muffler using Solid Edge 2020. The instructor walks through the process of creating complex geometry using a combination of sketches, swept surfaces, intersection curves, and the \"blue surf\" technique to achieve a smooth, professional result.
Hi, welcome to a Solid Edge 2020 video tutorial. I want
to do that muffler exercise in solid edge and
it went pretty well. I could do it
with one blue surf surface. a little bit tedious was
the creating of the sketches. but let's have fun
with Solid Edge. okay let's start with a
with a sketch on the top plane.
Want to go for a rectangle?
a line to trim it.
now add dimensions,
this should be 300,
this distance should be
400, that distance here
should be 180, that
one should be 280.
Now let's
align those midpoints and
add some
fillets,
90mm
fillets,
the last one.
I will need a construction line.
let's put it right there.
Let's align those midpoints. This one and that one.
Map. Make it perpendicular
and add a dimension of 60.
Close that sketch.
Finish. Cancel this out.
I want to go for a swap.
Need another sketch
on the right plane.
Let's bring in one
of those points here.
so go for that arc.
Make it a construction line.
Now let's start another line.
from that point it
should be 40 mm
in length,
the angle should
be 88 degrees, that's ok,
as
well.
close that sketch, finish, cancel this out,
and let's make a swept surface.
So first the path
down here, confirm,
preview, finish,
cancel this.
Next the sketch
on the right plane,
that will be a circle,
diameter 600,
the distance between
origin the center of this
circle should be 210 then
add another line should
be horizontal aligned
distance from that
point line might be 20
and each other side
as well see if this
is already snap here
Yes, it did, okay.
Close that sketch and make a symmetric extrude.
Cancel, Surfacing, Extruded, Selected,
Symmetric, the distance would be 4, 5, 0.
Now in order to make
my section sketches, I will
use intersection curves.
So I want to intersect
this body with that plane here,
give me that line, Finish, then
This one also.
That one?
The surface with
This surface with that plane here cancels out and
I will need another plane here with an angle.
So let's see if we can select this, I need another plane
and let's see what we can use because that will not work.
So I go for three points, but therefore I will need another point here.
You will need the midpoint here on that edge.
At that point, I could go for a 3D sketch.
And just put a point here
on the middle.
Close that 3D sketch
and now you should be able to use that point for my plane definition.
So go to by three points.
Select this point. Select the end point of that line.
And then this point up here.
Now I can make another
intersect.
Intersection.
This plane with that surface here.
And finish.
Okay. Let's go for the sketches.
Let's start.
sketch and I could hide that surface and the other surfaces
because I've got those lines or curves.
so it's better visible. let's go
for that sketch on the front
plane. let's see if we can use those
without projecting them. I need a tangent arc,
one which starts at this point and goes to that line
here. okay this should be for construction. no
this should not be for construction, sorry.
But I want to trim it here, and that didn't work,
because this one is not in the sketch
so I have to project it, so go for construction,
go for project to sketch, I need this one,
this one, that one, should hide these as well,
see what I'm doing here, tangent arc,
yes, not with that point, and go there,
and this should not be for construction,
and this should be tangent right here.
Same on this side.
Select that point.
Go to this here. Tangent.
Now I can't trim.
Take a look.
There's no tangency there.
Tangency here.
Sure this one is also tangent.
Yes it is.
Close that sketch. Finish.
Next sketch would be on this plane.
Bring in those sections.
Now I need to project as construction.
And this one.
Hi, those.
The construction for
the tangent arc here,
to that quadrant,
to there,
tangency, to this
side, control this,
is that already tangent,
I suppose it is, yes,
close this sketch as
well, finish, now
for the last one I have to go to this,
let's take a look, I want to see
this intersection, and I need another one,
I need an intersection from this surface with
So close this one.
Let's make another intersection curve
in this plane.
So go for intersection, no, not this one,
I need the sweep, sorry, the sweep.
Go for intersection,
that sweep with this plane.
Finish, cancel this out,
hide sweep and extrude,
hide
this intersection
sketch plane here.
Let's bring in those curves
as construction elements,
This one and that one.
this and hide intersections.
so for that tangent arc start
here. this that. this should
be tangent.
just control it. yes it was not. close
that sketch. finish. i've got all
these and i could hide
plane. desketch
for yes. so let's
add a key point
curve. maybe
here
on this endpoint. Here go
to this arc endpoint. That one
Then go
to that arc end point, and
this arc endpoint, and to that arc end p
okay, confirm, then go
to end condition step
and select closed, confirm,
finish, okay, let's bring back
that extrude and I want to
trim that extrude with that keypoint curve,
which is not possible because it's not on
on one side of this surface.
It's partly on this side, partly on that side.
So I want to go for a ruled surface,
and I want to go for a tapered one, yes, and this
as direction, the angle should be zero,
and I want to use that curve here, ok, let's go
for angle of zero, yes,
and it would be nice if we could put this up there, yes, confirm,
ok, and now I want to extend that surface
in the other direction, so go for extend,
that edge here.
25 as well. Confirm. Finish. Cancel this out.
And I want to use this surface here as trim tool.
so go for a trim. Trim this body with that body.
and remove this side.
confirm. Finish. Cancel this
out. And let's hide
this surface here.
and so.
So if I manage to do
everything right.
those curves should connect to
that surface here. okay let's bring
back that sweep. should be able
to do a blue surf surface. okay go
for blue surf. select this edge,
that edge. go for tangent
continuous and tangent continuous. then go
to the next step. that will be the guide curve step.
Go for single, yes that's ok, select.
this arc here confirm
select the next arc
confirm this arc here and
confirm that arc confirm
it's missing i think that one
is missing so select this one confirm
let's take a look i think i've
selected all of them yes and it looks pretty good
so go for next finish and list out
so if you want to be more precise you would have to add more
Section sketches with arcs.
But this surface looks quite nice.
I should be able
to hide sketches.
Let me sketch one.
Two new planes.
So one plane with an offset parallel
to this plane in that direction. 230.
Okay, let's do a sketch on this one.
So go for a sketch on that plane here.
Turn it around.
be a circle diameter
would be 56
and i need only half
a circle so let's try
to half of that circle
close that sketch let's make
an extrude if we extrude it i want
to extrude this one
symmetric but asymmetric it should go
in that direction
and possibly to this surface but
First I should maybe stitch those together.
So go for stitched, select this surface,
that surface and this one.
Preview and cancel this out.
And now go for the extruded in this sketch,
in that direction.
Symmetric. It should go up.
It should go to this one.
Make it let's say 60.
Let's go for a trim.
How could I use her?
You could use face round or fillet.
So go for home,
surface blend,
this surface,
and that surface,
25 millimeters.
First face should
be in that direction,
and the second one in this direction.
Looks good, preview, finish, cancel this out.
Need plane in
that point here.
So go for a plane, and that would be normal to curve, yes.
Select the curve, should be position 1,
yes, that's okay.
Plane, crazy, so that
would be position 0
in this case, not 1.
The sketch,
circle, that
circle should
be here, and
diameter 106.
Close that sketch,
make an extrude in
that direction, maybe
60. It doesn't really
matter. Okay, let's trim.
We trim this surface
with that surface
and I want
to remove this here. Fun. Finish.
Cancel this out and hide that extrude
with that sketch. I need a
second sketch on the same plane. Home.
Go for a sketch. Select that surface. Again a circle,
Let's talk about the stomachs.
a smaller one.
and try to snap here
Yes, close that sketch,
finish, cancel this out.
Now I need an extruded surface
with five millimeter direction.
That
should
be five
millimeter.
Cancel this out.
To trim that surface,
because it's convenient to do it like this,
I want to trim
this surface plane here,
this side.
Cancel this out.
Now let's do a blue surf,
surface on this edge here
to that edge.
Let's go for tangent continuous
and tangent continuous.
Next, finish, cancel this out.
This seems to be okay,
but I could, of course,
see if there's something to trim.
Let's go for trim, select that surface, right-click,
select that plane and see if there's something to trim.
That's pretty
planar there.
Okay, let's stitch those together.
This surface, that surface and a small one.
Preview, cancels out. The last step would be to
mirror that part, the home part,
this part, the top plane, cancels out
and stitch those together.
Stitched, stitched.
Cancel this out and I'm done.
Hope it was helpful, hope you enjoyed it.
If you did, please give it a like or leave a comment.
If you want to see more, please give it a like or leave a comment.
Please subscribe to my YouTube channel.
Please subscribe to my Facebook fan page.
Would be very nice if you. I want to get more
likes and subscriptions over there as well.
Thanks for watching. See you to the next one.
Bye bye.