Please note I´ve made a wrong "section-sketch" in some of the muffler v3 videos (the ones with sketches as guides) - the righthand side sketch has to be on an angled plane and you need a different intersection curve to make it tangent to. Sorry, just noticed it while I was doing the autocad version.
Less section sketches and no 3d splines - went quite well. You can download the part and the pdf from my grabcad account. Enjoy! - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This video tutorial demonstrates how to model a muffler using Autodesk Inventor 2021. The instructor guides the viewer through a complex workflow involving 2D and 3D sketching, surface creation, lofting with rails, and stitching multiple surfaces together to create a cohesive 3D model.
Hi, welcome to an Inventor 2021 video tutorial.
I want to do the Muffler exercise
and it went surprisingly well.
So, let's have fun with Inventor.
Let's start with a sketch
on the XZ plane,
which is 400,
300.
Let's align
this and go for,
That would be horizontal.
The vertical would be that direction,
because it's the thinner line.
This point and that point should be aligned as well.
Let's go
for trim.
This
problems
trim.
Okay, add another dimension
from this line to that line.
300, yes.
From this point to that line,
it should be 180.
From this point to that line,
it should be 280.
Let's add some fillets.
90.
Millimeter fillets
here and there
and here as well.
Then I will
construction line,
perpendicular
and align the midpoints,
this midpoint
to that midpoint.
Then give it a dimension for aligned
and that might be 100.
Doesn't really matter.
Finish that sketch.
Let's see if we can
do a extrude with a draft.
So go for surfaces and you can use taper A, that's okay.
Let's take a look, two degrees.
The distance should be 40 millimeter.
To switch the direction like this and confirm.
Make this one here
not translucent.
Then I need another sketch
on the XZ plane.
This will be a circle,
diameter should
be 600 at this point.
dimension, projected origin point
to the midpoint of that circle,
and this should be 210.
add another construction
line, dimension, maybe 20.
then trim,
and finish that sketch,
and let's make an extrude,
symmetric, and 50 should do,
and confirm.
and again, make
this one translucent.
Okay, let's bring back that sketch, make it visible.
Because I need another plane which should be angled around that axis.
So go for a plane,
select that axis and as reference the XZ plane.
So the angle should be 90 degrees and confirm.
I want to draw my section sketches.
Let's start with a sketch
on the YZ plane.
Let's bring in the edges.
So go for project cut edges.
They're already here.
And now I want to add a
tangent arc on this point,
that one, on this point,
that one, tangent, okay?
Finish this sketch,
let's go
for another sketch,
now on XY plane,
again, project cut
edges over here,
a tangency, go for tangency,
finish this sketch as well, now the last
sketch should be on this plane here,
Again project cut edges.
Right here and go to
that one tangent
the sketch let's hide
the plane hide
that surface and to make
a 3d sketch with a
spline so go for a 3d sketch go
for a spline interpolate it
this and that end point
that one
and again create
and sadly i snapped
to the wrong point delete it
and do it once more this happens
one sure here at that point. that's
more like it. finish that sketch.
I could
project this curve to set plane
or I could go
for a ruled surface. go for
let's say 50. go for the vector
and the vector would be the y-axis.
Select the curve, that will be the curve,
scroll here, select the curve.
Angle is zero.
Translucent.
Now I want to extend this.
So go for extend, select the edge and maybe 50 millimeters in
that direction as well. Bring back that surface.
Now trim this surface with that one. So go for a
trim. This will be the tool and I want to remove this side.
And OK. And hide that surface.
In Onshape, I did 3D splines.
my sections but in event i can use those tangent
arcs so the most troublesome patch would be
over here so let's start
with this one here i want to go for a loft
and should be surface i could do
this as oh yeah before i can go for loft i have
to split those surfaces so go for split
The tool will be...
The first one will be, which one?
I set plane, yes, and I want this one
and that one and that's
not really possible here.
All faces, which doesn't make sense here because it's just one face.
So confirm, repeat that process, repeat split,
now go for all faces, select this and then
you get cut both of them
That will mean not the tool, the tool will be the other plane
and that would be the XY plane and select
these faces.
Confirm.
Repeat that split.
This one.
Faces. This one. Confirm. Another tool.
This one. Go for all faces. Confirm.
The last split here with that plane here.
That would be the work plane.
That one. So go for another split.
Use that work plane as tool.
There you go. Split this face right here.
Not all faces but only this one. And okay.
My first loft. So I want to select this edge here.
The surface. This one.
those edges here first go to conditions
and make this tangent and tangent
then go back to curves
add this one is rail
that one is rail
confirm
here another loft
surface these edges
that rail here
which is not visible at the moment
because that one is hidden
Let's cancel this first and...
Bring them back, that's visible.
Now go for the loft
surface, this one,
select those edges,
go click update like this,
click
here, now go for the tangent condition
on both edges, go back to the curves, now add
this rail here, that rail there,
update by clicking here,
then you could go for another
The tangent condition.
Or this edge,
translucent.
Now those, I go for cross surface,
select edge.
Click that, select that small edge here.
This one, that one, this one.
Click here to make an update.
Condition, tangent,
and tangent.
This has rail.
And the second rail would be the edge of that loft here.
So go select other,
and that would be the edge here.
Click here to conditions and make it tangent there
as well and confirm this surface not
translucent.
I want to close
that gap here.
Let's see if we can do a loft or if we have to go for a patch.
Let's try loft first.
So that would be one edge,
add another one that would
be in this edge chain,
go for the
On the rails, I first do
The conditions.
Now go for the rails, and there you want to have an edge,
so go right click, select other,
go for the edge, ok, then add another one over
here again, go for the edge, select other,
for the edge, ok,
let's see if we can go
for tangent conditions
as well, we'll see, great,
Works really well.
So make this surface.
Translucent.
Stitch all those surfaces together.
So go for stitch, that one,
this one, this one,
that one, this one, and that one.
Apply, and done.
I've got one surface, which I could make not translucent.
Great.
And I could hide some
of the sketches.
Yes, but I could hide the other ones.
So I could hide this one,
and that one, dimensions.
Let's add another plane.
So I want to have a plane with an offset
from Y set plane, yes, in that direction.
So this should be minus two, three, zero.
Let's go for a 2D sketch on that plane.
This will be a circle,
and diameter should be six.
And I want to use
a half circle,
so I want to go
for trim, snap, nope,
this, and then trim.
Finish that sketch, hide that plane.
Now I can trim with that sketch this surface.
That's quite nice. So go for trim. This will be the tool.
And I want to remove
this here. And okay,
bring back that sketch.
Let's make an extrude.
That one.
That's sort of crazy. Okay, let's try once more.
I want to have an extrude. Not with this sketch,
but with that sketch. So it always switches to solid.
I have to switch to surface like this.
And this should go up to that surface here.
Okay, stitch
those together.
Fillet five
millimeters.
This edge here, confirm.
Plane, so go
for plane.
I select this edge and that point.
And then I need another one,
which has a distance from this one in that direction.
And this should be minus 30 millimeter.
Okay, let's do a sketch right there.
Let's go for a circle.
And diameter should be 106.
Finish that sketch and now I can trim that surface.
Trim with that tool this part.
Okay, another sketch
in that plane here.
That circle should
be 56 in diameter.
And I need only one half.
So let's go for a construction line.
I should be able
to trim it.
Finish that sketch as well.
So now, in order to get
Here a nice surface.
I need some rails or guides here from this point to that point.
To that point. Not really from this point but from an extrude.
Let's go for an extrude.
Switch to surfaces.
Select this one.
Make it five millimeters
in the suggested direction.
And now I need to go from this point to that point.
And from this point to that point.
And it should be in a plane. So I go for a sketch.
Let's go for a sketch on the exact plane.
I'll go
for project cut edges.
Let's hide
that sketch.
So go for arc here
and this should go up to,
this should be a point is.
It's kind of annoying because you don't
really see that yellow projected edges.
And this should be somewhere over here.
Finish
that sketch
and hide that
sketch one.
I will need a fill surface, a patch, because the loft will not work.
In order to do that,
I need to extrude faces in here,
maybe in that direction, that's okay.
And another one, again the sketch
is hidden, bring it back,
make it visible, now go for another,
extrude that one here,
again in the other direction and confirm.
Now I can do a fill.
Let's hide.
Sketch, that would be sketch 9.
So, go
for the patch.
Add the edge
chain.
But just this edge.
That edge.
This one.
Try to make
it tangent
to all adjacent
surfaces.
Check.
This one.
Great.
Those two edges, surfaces I don't need,
so I could hide them.
This surface and that surface.
Now stitch those together.
Go for a stitch on this surface,
that surface and this one, apply, done, and now let's
mirror that surface,
so go for this surface
with the set plane, ok,
pretty good, now stitch
those together,
make it not translucent,
hide 2D sketches,
3D sketches
and the work planes
like this, and I'm done.
So I hope this was helpful.
Hope you liked it. If you did, like it,
please give it a like and leave a comment.
If you want to see more, please give it a like and leave a comment.
Please subscribe to my YouTube channel.
Please subscribe to my Facebook cat fan page
because I want to get more likes and subscriptions over there as well.
Thanks for watching. See you to the next one. Bye bye.