This description contains affiliate links, which means that if you purchase something from the links displayed above I get a small commission. It does not come out of your pocket, but it does help me to support this channel. Thank YOU! #nopatternsewing#easypatterndrafting#thoughtfulcreativity
Thank You for being here and I hope that this channel encourages you to sew and make beautiful things!
xxx, Alisa
AI Generated·May contain errors
Dear sewing friends,
now did you know that you can actually sew your very own Christmas tree
ornaments? That's right, it's not a gimmick.
I've done this for many many years and in this video I
would love to share with you five beautiful
and elegant ornaments that you can create that will
make a beautiful gift, a sentimental piece to put
on your Christmas tree, perhaps even an heirloom
item that you can pass down from yourself to your children and so on.
Each of the ornaments is going to feature a full tutorial
and at the end of that tutorial
I'm also going to do a frequently asked question roundup
so that way you are fully equipped
to make some beautiful Christmas ornaments this holiday season.
And we're going to start with one of my favorite ones,
the ones that I made last year because
there sky is the limit and you barely need anything for it.
You don't even need a presser foot for it.
Can you imagine?
It's that magical.
You can make these by hand or you can make
make these on a sewing machine. I'll show you both ways.
This one was actually made by my
daughter. She's about six years old
and if she can do it then you can totally do it.
as well. it's a fun little project to sort
of dive into something else, something a
little bit different than just regular garment sewing or perhaps
quilting. you will need these little hoops which
perhaps you will need to order. i did get mine
from amazon so don't hate on me.
there were nine in a pack
and i will link them in the description if you want
to take a look.
Then you will also need a fabric that will go into the hoop.
I like to use linen. I think that it gives
that really nice rustic feel but
you can also use cotton linen blend or just regular
cotton. Scraps are really great for that and you
will see that most of my backgrounds are white.
You don't have to stick with white.
You can do another color as well. It's all
Definitely up to you.
You will also need to have some sort
of ribbon to tie around your ornament so
that way you can put it on the tree,
and colorful thread. Now you don't have
to have embroidery thread, it definitely helps if you do, but it's
not necessary. A regular colorful thread will do just fine.
One more thing that I would suggest to have
for this project is some light or medium weight
interfacing, just some regular interfacing
that you use in garment sewing. It's not exactly
necessary, but I do feel that it will add more longevity
to your ornaments. And that's always
the key, right? To have it and cherish it
and to look back at it years to come.
First grab your hoop and a piece of fabric scrap
that you're going to be using for your embroidery.
Now in my case this is a fabric scrap of white linen.
We're going to cut another circle out of it
that's going to be a little bit bigger than the diameter of the hoop.
I just found that using this roll
of tape as a template works really well.
Well, so...
Just to give you some visual,
this is how the hoop fits inside this roll of tape
and the diameter here is about four and three quarters, so nearly five
inches. I'm going to outline this with my water soluble pen
and then we're going to cut it out.
Next, if you're going to be doing free
motion embroidery on your sewing machine,
we're going to interface it
so we'll need to cut out exactly the same circle from interfacing.
If you're going to be doing it by hand
then I would leave it as is for right now.
Place the interfacing bumpy or rough side up
and then place your fabric right on top of it and
usually interfacing comes with instructions
of how much heat to apply and for how long
so just follow those instructions to fuse these two together.
After that I take the entire hoop,
place it right in the middle,
grab my water-soluble pen and circle around it so that way I know
How big of a design I can afford
in order to not to kind of spill all over the place.
With that comes the most fun and creative part,
thinking about what would you like to put on your ornament.
The biggest tip when choosing the design
for your ornament is in the name of the technique,
so thread sketching. So choose something that will look good
when it's sketched out. I wouldn't
necessarily go for something that you will need to fill in exactly
and I also wouldn't necessarily
go for something that requires super duper precision.
So I found that for these little
ornaments the best way is to go for some foliage where you would
be able to make these beautiful
I really like this little Christmas tree in a pot,
so I'm just going to sketch it out
on this one as well.
If you need, you can of course sketch out yours
to be in more detail, but for right
now I'm going to roll with this.
Before we move on to the sewing machine,
separate your hoop, get your piece of fabric, place
Place it on top of the larger hoop,
the one that has this little screw on top.
Like this and then place the smaller one to the inside.
You might need to scoot it down just a little bit so that way
we can have enough space to complete the branches
and then to complete the little
pot. And then push it in. Once that is done
Then we can move on to the sewing machine.
Now when I do thread sketching on garment sewing and by the way
it's a fascinating technique it's so beautiful I definitely recommend
then usually I just remove the presser foot and that's it.
But here because the hoop
is so small I actually need to remove the part
that holds the presser foot.
For that I do have a little screwdriver that came
together with my sewing machine and it's really easy just one two three
and it comes off. Just make sure
that if you do this that you don't lose the
the actual parts and you remember
Remember how to put them back together.
Next you will need to lower or cover your feed dogs,
whatever is available on your sewing
machine and if at all possible decrease
the stitch length all the way to zero on your
straight stitch.
From here choose the color thread that you would like
and if you do have variegated thread
I would highly suggest that because it definitely adds
a little pop of interest and pop of color
To your entire piece with very, very little effort.
Then grab your project, bring it underneath the needle and decide
which way that you would like to start
and for me I think I'm going to start
upside down. Now although we have removed the presser
foot and a little attachment we still need to
lower the entire thing before we get started.
Then I like to hold the end of the thread with my left hand
and lower the needle into my project by hand cranking it first.
Let's pull up the bobbin thread.
My bobbin thread is this silver color so you might not be able to
see it too clearly but it is right over here.
Now we're going to go over this little thread
just a couple of times almost like staying in one place
so that way we can secure it.
Once done you can take your scissors
and snip the end of the thread so that way
it's out of the way. Using the embroidery hoop almost like
the steering wheel I'm going to move it back and forth
side to side and threads catch each of the branches of the spine tree.
Now remember that your stitches
are not going to be all uniform and that's
totally fine in this situation because we're working with lowered feed
dogs. We're also working without the presser foot
And the stitch length is down all the way to zero because in this case
your movements are controlling the stitch length
and which direction you're gonna go.
Please don't feel discouraged if at
first it doesn't turn out exactly as you want it, just give it a
try. A little bit of practice is definitely
gonna go a long way and you'll be making something
beautiful in no time.
Once done I'm actually going to take the sparkly thread
and I'm going to do one more pass
on top because I think that it adds this sort of effect of
tinsel or snow being on this little Christmas tree
and that's what I'm going for. If you look at it a
little closer and I'm not sure if camera is really doing it justice
but there is a little sparkle
after the second pass and I really love that.
After this we're going to move on to the pot.
I'm going to reposition my fabric,
making sure that the part now is inside of the circle,
so that way I can easily reach it with the needle of a sewing machine.
When done I'm going to remove my fabric from the hoop
and then put it back the right way that
it's supposed to be. So over the small circle I'm going
to position my little tree in the pot
and then place the large circle right on top of it
so that way it frames it nicely.
If I can see some marks of my water soluble marker
at this point I would head to the sink,
grab a little sponge and dab a little bit of water
so that way it goes away.
It will also give your project a sharper, crisper look
if you give it a really good press before
finally putting it back into the hoop.
Let me show you the front of the ornament and the back ornament.
And the back is not finished just yet but before we move on to that
let's explore very quickly the hand embroidered option.
When doing embroidery by hand I have found
that opting for thicker thread
definitely makes a positive difference in the look so that's
what I'm going to be using here. My daughter here is working on another
star design so I'm going to show it on her example.
As you can see, the star design is outlined.
For a child I have opted for a larger needle
so that way it's just easier to handle it and also
we do not have any interfacing on the back
of this linen otherwise it's just really hard to
pierce through the fabric and the interfacing
so I opt for adding interfacing after the design
is completed. So we have our needle and our thread
and we're simply going to follow the outline,
Bring the thread out.
Bring it back to the previous position. There we go.
Then go one further. Bring it back to the
previous position through the fabric
and repeat that until the entire design is complete.
Sometimes combining multiple thinner threads works really well,
but then it can easily get tangled.
So definitely take a look at which option you like better.
I definitely have just a very basic hand embroidery skills,
very, very basic, so I'm not an expert
at all, but even with those basic skills,
you can complete and make a beautiful ornament.
That's how the Snoopy, this flamingo, and the little star came about.
The star was made by my daughter,
and then the Snoopy and flamingo were made by me.
To complete the back of the ornament we're going
to grab another piece of fabric
and we're going to cut a circle out of it
that was the same size as this circle, the one that
we cut out for our embroidery,
which was a little bit bigger than the hoop itself. So in my case it
was five inches in diameter and that's what I'm going here for.
Now grab your regular hand sewing
sewing needle and your regular thread and let's do a running stitch.
On the edge of this circle the steps for hand embroidered
and machine embroidered ornament
for this part are going to be exactly the same.
Once we've got a full circle we're going to use
it to cinch it in and bring it together and form a circle.
It's similar to making a fabric yo-yo
if you're familiar with those and it doesn't have
to be a precise circle because we're going
to manipulate it with our fingers in the next step.
Then grab your ornament
And bring in the fabric to the inside and then grab your iron
and sort of press it in a little bit.
Now be careful if you're using a plastic hoop
then you won't be able to do that
otherwise you'll melt your hoop.
So just be aware of what materials, what fabrics
and what tools you're working with.
Now grab this gathered circle and place on top of it.
We just want to make sure that it's big enough
To cover it and if it's not then we're going
to loosen it up a little bit.
If it's too big, we're going to bring it in a little bit.
You get the point.
We just want to make sure that it will go on top of it,
covering all of this business
in the back.
Now with the same needle, I will go into the edge of my fabric circle.
There we go.
And then I'm going to place it on the back.
And we're going to start stitching it.
So from here, I'm going to place my needle
into the white linen and pull it through.
Through the beige linen, into the white linen, and.
Pull it through and I'll continue doing that all the way around.
Now I must say there's always another way how you can do this or that
and of course you can use some glue instead of doing hand sewing.
I did that on this little example, however it's not my favorite result.
It's not bad, it's just not my favorite. I think that hand sewing
looks way better in the case of this handmade ornament.
To make a little bow with the loop at the top of the ornament,
first we're going to cut our ribbon
to about 18 inches. Next I'm going to take the ribbon,
place it right here and pull it through.
Then I'm going to bring the ends together
and right here on top I'm going to form a loop. Next
I'm going to place my thumb right over here
and I'm going to switch hands, move the top one out of
Bring the bottom one over like this,
sling it across the back, bring it over, and then
tie this
in a knot.
That is going to secure this loop.
After that we're going to take the left side,
form a little loop like this, then bring it
over to the right side, and I'm holding it with my thumb,
then bring the other end on
And on top of it.
And through here.
We're going to
Bring in the other side and since my ribbon has a print on one side,
we just want to make sure that we sort of
Twist the ribbon in a process so that way
everything is right side up.
After that, just tighten it up, make it real pretty,
and cut off the ends on the angle.
That's it, your little bow and loop is ready.
If you need to watch this again, you can do that.
And if you didn't know, you can also adjust the speed
of your YouTube video so you can make it slower
so that way you can see all of the necessary details.
As a final touch and you know that sometimes I
do like to add a little sparkle and it's holiday
season so why not and I already have these on hand
and they were left over from the
diamond painting kit for these little magnets.
So in order to attach these to the ornaments I use
just a regular permanent fabric glue that I had for a few years now.
Definitely a solid choice
And they're on there quite securely.
Here's the final look after the glue has dried.
All right, you're frequently asked questions about these ornaments.
One of them is can you use any
thread or does it have to be specifically embroidery thread?
And the answer is you can use any thread
that you have. I wouldn't of course use thread
for like denim top stitching but any other regular
all-purpose cotton or polyester thread will do just fine.
Now embroidery thread will give you a
better result though because it is a little bit thinner.
It also has that beautiful sheen to it.
Oftentimes, it comes very...
Thank you so much
for watching and I'll
see you in the next one.
Great. Next question regarding these ornaments
is do we have to stabilize the back of the fabric and
the answer is you do not.
However if your fabric is really really thin I would stabilize it but
because we are using medium weight linen
or medium weight cotton and we are stretching it in the hoop
it creates enough tension for the needle to go up
and down without dragging the fabric with it so
you don't have to stabilize your fabric in this particular scenario.
Now if you have tried free
And for some reason, you're not getting
the results that you want as of right now.
Keep practicing.
You are going to get better
because it's just the motion of your hands and how smooth you're
guiding your project, your piece of fabric underneath the needle.
This next ornament idea that I want to show you is fresh.
I just made them this year and I absolutely love them.
They also utilize a lot of interesting techniques.
You can make them as simple or as intricate as you would like.
So let's take a look.
These Christmas ornaments are gonna come together
in about 15 minutes, which is a plus.
Another plus is that you can either use
a beautiful fabric that you have,
or you can use fabric plus a variety of different techniques
to put on top of that Christmas ornament and personalize it.
So here you can see I've played around
a little bit with bobbin sewing.
Here I did free motion embroidery, which I absolutely love.
And here I use some applique techniques.
All of these are super fun, super easy and open a world
of possibilities of making it really special.
To get started you don't need much. You will need
your main fabric, you will need fusible fleece.
It's not 100% necessary but I would highly highly
recommend that. You will need some sort of string
for the loop of the ornament and of course any
Any other additional things, like, for example,
embroidery thread, maybe some sort of...
Little crystals to put on top or perhaps some fabric for the applique.
You will also need something to stuff them with.
To make your own template first, you're going to take a straight line
that's about four and a half inches long, just like this.
Now take an inch and one eighth on each side
of this line right here on top.
I'll measure about one inch
from the bottom like this.
five degree angle or so you will measure an inch
and a half to the left and about two and a half
inches to the right.
Now we're going to take down straight lines from the top.
Those are going to be
forming the top of the stocking.
We're going to do a slight curve over here.
From here we're going to connect these.
Sometimes it's useful just to do it with a dashed line so
that way you don't have to commit to a full line just yet
and then you can fix whatever you need
to fix. We will also curve right over here and then
do a slightly rounded part right over here.
Don't worry the first draft always looks like that. From here just
Commit to achieving the shape that you want,
maybe not as curvy, maybe a little bit more curvy,
just depends on what you want your stocking to look like.
Now this one is available for the members of the channel.
Members, thank you so much for being here
and thank you for all of your support.
You can find this template on members google drive in the
templates folder and there you can
also find a lot of different templates like for example a pattern
for a crossback apron, for this color block zipper pouch
and for many other projects. So if you've
been interested about joining the membership
but you just didn't know what else comes with it,
Definitely check it out.
I'll leave information for you in the description.
First, we're going to start by cutting out your template.
Mine is without seam allowances
and without hem allowances, and I want to cut it out as is.
So if you're drafting your
own, just remember that.
Don't add seam allowances or hem allowances to it just yet.
Next, take your fusible fleece.
Place the template on top of it. I'm placing mine on
the rough side, on the side that has the glue, and then outline it.
Here's an extra tip.
If you made one of these ornaments and you like them,
then you can batch cut the rest.
This is going to make your whole process so much quicker.
Next step is going to involve
the fusible fleece stocking that we just cut
and two rectangles from the fabric
that you want your stocking to be made out of.
Each rectangle is going to be 4.5 inches by 6.5 inches
or approximately 12 centimeters by 16.
One of the rectangles is going to go
on top of the fusible part of the fleece.
At this point, if your fabric has some sort of pattern on it,
I like to make sure that the
pattern is nicely centered.
Then flip it over and make sure that the stocking is placed in such way
on the rectangle that leaves at least quarter
of an inch for seam allowance all the way around.
After that, flip it back and let's fuse them.
From the cord or ribbon that we're going to be using for the loop
we will need to cut approximately nine and a half inches long piece.
Then fold it in half and place it on the right side
of the fabric on which we've used the fleece stocking.
You want to place it in this corner right over here leaving about half
an inch or so hanging out.
After that place it on top of the second rectangle right sides facing
and pin just like you see me do on your screens.
Now we're going to stitch all the way around
on the very edge of the fusible fleece and using that
as a guide leaving small opening at the top
of the stocking for turning everything right side out.
We're going to start with the backstitch
and usually the rule of thumb is that the
thicker is your project the more you would increase the stitch length,
but in this case if you actually stay
at the stitch length that is your regular
Or go a little bit lower,
that is going to help you to create nice and smooth curves
as you go around the stocking.
At the end, when you're ready to finish, of course, don't forget
the backstitch. Let me show you up close what you
should have once you're done with the sewing part.
You can see that stitching right on the edge of that fusible fleece.
Now it is time to cut out the stocking
and we're going to do that with quarter of an inch seam allowance
and I know that it might seem like a very small seam allowance for some
but take my word for it, it really works and it's essential
for turning out really nice curves without clipping or notching.
You can leave a bigger seam allowance at the very top of the stocking,
I would say about half an
inch or so, but that's the only place where you're going
to leave a larger seam allowance. Everywhere
else please quarter of an inch, 3 eighths of an inch at the maximum.
After that turn your stocking
right side out, rolling all the curves between
your fingers to make sure that they turn out
When you're done with that part another essential step
is to give it a really good press. Now it is
time to stuff it so take the stuffing and fill in your stocking.
Sometimes people like to use
fabric scraps for this part
but in this case you will need to shred them really really well
so that way your stocking doesn't end up lumpy.
You can also alternatively mix half
of the stuffing with half of the fabric scraps
and that might give you a better result.
When done, we are going to close the opening
at the top of the stocking with just regular
hand sewing needle and thread.
Now the ornament that we made together
is made out of patterned fabric and the only
thing that I added after it was done
are these little crystals to sort of
Add a little bit of sparkle to it.
So this is one way to go about it,
but I actually prefer using plain fabric.
Like for example,
this sort of like neutral green or this beige, both of
these are cotton linen blends, and they are a beautiful background
for some special techniques.
First, let me show you this gift set that I made.
We have four ornaments and each of the stockings features first
letter of the first name.
So this is for a family.
And as you can see, I made them using applique technique.
To make it happen you're going to complete
your applique before sewing the stocking together and
there are many techniques that you can use.
You don't actually have to stick to the satin stitch
like I did over here. You can do embroidery stitches and whatnot.
I have a full video that
is going to guide you step by step on how to do beautiful
and easy applique so I will leave that
video for you.
in the description. Next we have free
motion embroidery and I also sometimes
reference it as a thread sketching. This is a beautiful
technique, easier than it seems and any sewing
machine can do it. It might seem familiar to you because
we've done a lot of that on the channel
and we made these beautiful thread
sketched ornaments last year as well. So there's a full
technique behind it. In the last year's ornament we did it
in the hoop so we stretched the fabric over the hoop
and this year's you can actually do it without the hoop because
as your fabric is stabilized over a diffusible fleece.
You can definitely do a lot of beautiful things
with this technique, so I encourage you to give it a try.
One more technique that I want to show you before we go
is called bobbin sewing.
If you take a closer look over here,
you will see that stitching over here
is done with a really nice thick thread.
This thread is so thick that it really makes it difficult
for sewing machine to sew if threaded as usual
through the needle, but it can fit into the bobbin.
We're going to wind the bobbin
and when installing it we're going to bypass the usual steps that
we need to do in order to create tension of the bobbin thread.
Next we're going to outline our design
on the wrong side of our project and we're going
to sew with the wrong side of our project up.
When done the beautiful thick decorative thread
is going to form wonderful stitches that almost
look like hand embroidery on the right side of the project
and that's what you see over
You can of course do so many more things,
just let your creativity guide you and sort
of immerse yourself into that holiday spirit.
I only have one frequently asked question
when it comes to these ornaments and that
is if I do interface just one side of the stocking.
And the answer is yes.
Just like you saw in the tutorial,
I interface just one side, the face side, on which you're
going to be doing your embroidery, your applique,
or whatever else you decide. I just find that doing
this on both sides is a little bit too thick,
but by any means, if you'd like to give it a try,
absolutely go for it.
With that, next on the list we have these beautiful rustic ornaments.
Here we have a truck with a Christmas tree,
which is probably one of my favorite designs out of all
of the ones that I have made.
And it's not too complex, it's not too simple, it's right there
in the middle.
After that, a little house with trees all covered in snow.
Next, we have a little
stocking, which, you know, is a Christmas classic.
And after that, a little mitten, which is the
the design that we're going to be working on today together.
All right now let's talk about the materials that you will need
and remember that you can always customize
this to what you already have
on hand but first and foremost of course let's
get started with the fabric and to get that really nice rustic look
for your ornaments I would suggest going for linen because
it has that nice texture to it but of course you can go for cotton as
well so grab your fabric scraps. Next we will need to have some sort of
stabilizer to make sure that ornaments can keep the shape and I
And I use either DecoBond or
heat and bond and as you can see this one is pretty thick.
Next I like to give my ornaments
a little bit of thickness. To achieve that
I take cotton batting and I sandwich it between the fabric.
Next you will need to have some sort
of adhesive. You can also make it work
without it but it just makes life a little bit easier.
In my case I use Wonder Under. It's double-sided interfacing
or you can also just use some fabric glue.
Next two supplies are quite optional. We have ribbon
And then we also have eyelets for the top of the ornament.
All right, with all of our materials gathered,
let's get to the creative part.
For each ornament, we will need to cut multiple circles.
The first two are going to be from the
base fabric, the one that you will see in the front
and in the back of the ornament. And I
chose to go with this really nice beige linen.
It's a great background color. Then we will need
to cut one circle from cotton batting in order
to add a little bit of thickness to the ornament.
And, to stabilize the linen
or any other fabric that you're going to be using, we will need
to cut two circles from the interfacing.
Each circle is about 4 inches and a quarter in diameter
or approximately 10 and a half
centimeters.
First, we're going to fuse the base fabric
to the interfacing, and we're going to do
that with both pattern pieces.
If some of the edges are slightly uneven don't worry about it too much.
The linen does tend to
move around quite a bit but we will
also get a chance to tidy this up at the very last step.
Now the design options for this project are basically limitless.
You know, they can all
come from here, right? Or you can get a little bit inspired
by what you see on the World Wide Web.
Obviously, in this case, for example, the truck,
we've all seen it around, right? And you can make
it as intricate or as simple as you want.
It's definitely all up to you. I like to start with
the overall shape and size of the ornament
and then lightly sketch out the design idea that I have.
This time I think we're going to go for a cute little mitten.
Once the design is done, let's cut it out.
I want the main part of the mitten to be in this burgundy color,
but this part to be in white, so I have to separate them.
Now because I'm using Wonder Under, I have to cut out a piece of it,
so that way I can fuse it to this linen.
As you can see, the Wonder Under has the paper backing.
Once you unpeel it, you can
then once again fuse this piece to another piece of fabric.
It is also great when you need to trace details.
So I'm going to place my little design face down
and trace it.
Next I will do all the same steps for the other parts.
If you're working on more complex designs like for example this one,
then you'll need to keep in mind
the sequence of attaching these objects.
For example, the house goes on first, then the windows, then the snow,
and only after that you'll attach the snow on the bottom.
This time my design is rather simple,
so I'm going to start by attaching the mitten itself
and make sure that you leave on top a little bit of room
so that way you can attach the eyelet.
After that goes the bottom part of the mitten.
And then of course the heart.
Next grab the circle that we cut from the cotton batting.
Place them together like so and let's head to the sewing machine.
To attach the small parts of the design what I prefer
to do is to remove the presser foot
and then also to lower the feed dogs
and that will allow us to do a free motion sewing.
But if you don't feel comfortable
with that that's totally fine you can just
sew as is as you would usually do. To do it the way that I do it
go ahead and place your ornament underneath
and decide where are you going to start.
I will flip it over and I will start right over here.
Now make sure that you have lowered
the presser foot. I know that we don't
actually have the presser foot on it but lower the entire piece.
Then lower the needle and bring it back up.
Take this part of the thread and pull it.
Pull it until you see the other thread
come up. Now hold them together with your fingers
and we're going to start stitching.
Do a couple of stitches remaining in the
in the same spot so that way we can secure the threads.
Now slow and steady let's stitch all the way around.
Now because I did lower the feed dogs now I have
the job of pushing the fabric
or in this case an ornament through the sewing machine.
And the pace and the speed at which I
do that will determine how even or uneven
going to be the stitches. And quite frankly sometimes I think it adds a
little bit of charm to it like in this case. Here we can either
finish up and do the other pieces separately or we
Or we can continue.
Next let's snip off all of the threads, grab the other side
of the base fabric that was fused with the interfacing,
place it wrong sides together like
so and sometimes it does help if you clip these together.
I don't think you will be able to pin these together
because the layers are quite thick but clipping together like this
Sometimes it's very useful. Now let's head back to the sewing machine
this time bring the feed dogs up
and install the sewing foot back onto your sewing machine.
Go ahead and increase the stitch length
because we're going to be sewing through so many layers
and I personally like to move the needle
as well a little bit closer to the right
edge of the presser foot.
Now placing the ornament underneath let's align the edge
of the presser foot with the edge of the ornament.
I'll take out this clip
And the goal is to continue stitching
while aligning the edge of the presser foot
with the edge of the ornament. That is going to ensure a really nice
and smooth curve all around the circle.
Sewing wise we are done, so you can put
away your sewing machine.
And now let's trim this quite close to the stitching line.
When it's time to do the eyelet I simply use an ornament that I already
made, place it on top and then I mark the placement of the
eyelet with one of the marking tools.
After that I need to cut out a little
hole and the size of it is going to depend on how large is your eyelet.
Usually eyelets come with the instructions that will guide you step by
step on how to hammer those in. Once done you
can then use a ribbon to tie a little bow
and make a loop for hanging on the tree.
At this point your ornament is ready
but I like to add one last special touch.
For that I use acrylic paint
and the opposite end of the paint brush and then I simply add
a little bit of polka dots or you can also call it snow.
I truly think that it does add
a little special touch and there you have it your ornament is ready.
Now let me share with you some other designs that I've been working on.
If you want to know how to do these bows for the loops
of your ornaments just reference the hoop
ornaments that you saw earlier in the video.
The technique for the bows there is exactly the same
and there we go step by step.
Also I've had these for two years now and some of them do have
slightly sort of like weathered edges and I kind of like that.
But if you'd like to keep your edges as they
are the moment you made them, then I would
suggest applying a little bit of Mod Podge
or perhaps some clear glue so that way these
edges will stay nice and they wouldn't unravel with years.
Ornament number four comes with a free pattern
and although it might seem like it has quite a few
moving parts to it, it is actually pretty straightforward.
So please don't be scared
and these cute little gnomes are definitely worth it
and people are going to adore them.
To get started you really don't need much at all.
A project like this is great for fabric scraps
and I like to use linen for that beautiful rustic texture.
But of course you can also use cotton
Or perhaps any other fabric that you might have on hand.
You will also need faux fur for the beard of the gnome.
You will need something to stuff it with, like stuffing.
And of course you will need a little ribbon.
And I like to use for that this little tool tape.
To make it super easy for everybody I actually did make a pattern.
It's a free pattern,
it's available to everyone
and the link will be in the description of this video.
You will find this pattern on Google Drive
that I use for Project Dresser Girl. This file will
be among some others
so once you open the link just find this file and print it out.
It is just a one pager and you will see that
in the left upper corner there is a one by one inch
desk square and in the right upper corner
there is a QR code.
So once you print this out and if you want
you can also file this into your sewing folder
and next year when you want to make it again
you can simply scan the QR code with your phone
or your tablet and it will take you
to this original tutorial.
Let's take a look at the pattern pieces
that we will need to cut.
We will need to cut one for the nose.
Make sure that you add your seam allowances to it and I
prefer to add quarter of an inch
or three eighths of an inch seam allowance. You will also need to
cut a little ribbon about eight inches long
or approximately 20-21 centimeters.
Then we will need to cut two pattern pieces for the hat.
Once again add your seam allowances.
Four pattern pieces for the little mittens or little hands or gloves.
We will need to cut one
pattern piece for the hat rim as is.
Seam allowances already have been added to this one.
And we will need to cut two for the body.
One of the pattern pieces is going to be cut from the
main fabric. In my case it's linen.
And the other pattern piece is going to be cut from faux fur.
If you would like to you can also add a little label.
If you do want to add a label
this is the first thing that we're going to do.
Place it on the back pattern piece, you can center it if you'd like to,
and then stitch it down. Next let's prepare some of the smaller pattern
pieces. We're going to grab the pattern pieces
for the hands. There's four of them.
You're going to place two of them right
sides together and then stitch with the seam allowances
that you have cut.
Now working with such a small pattern piece can definitely
be a little bit challenging especially
when we're talking about sewing a curve
so take it slow and steady and you can always stop,
readjust and then go again.
Another option would be just to simply complete it by hand
if that's something that you feel more comfortable with.
Once you have both of these done we're
simply going to turn them out.
Now because the seam allowance is so little we're not going to
I'm going to clip it, take one at a time, pinch it.
Like so, then grab the back piece of the body
and about an inch and a half down, place this
Right over here on the edge, that's how we're going to stitch it.
I am working here with white thread
so hopefully it is more visible to you.
And this is how it's going to look like
when we're done with both sides attaching both
of the little mittens.
Next we're going to do the nose.
I find it easier to do it by hand
but you can of course use your sewing machine as well.
So first grab a little piece of the stuffing and roll it into a ball.
Like this. Then grab the pattern piece for the nose
and turn it wrong side up. Then start folding
about quarter of an inch in because that's
the seam allowance that I used. If you used more,
you will need to fold in more.
And then we're going to do a running stitch on that folded edge.
When you have gone all the way around,
it is time to place the little piece of stuffing
On the inside.
So, stuff it in.
And then pull on a thread to gather the edges.
Then do a couple of stitches from side to side to bring it all together
and finish everything with a knot.
Next, grab the little hat patterns and grab the ribbon.
On one of the hat patterns facing right side up,
you're going to take your ribbon,
place it like this right at the very top.
In the middle and then secure it by going over it
a couple of times with a straight stitch.
Just like this. Next on the same side
of the hat we're going to do a running stitch
right here on the very bottom within
the seam allowance that you have selected.
With the running stitch make sure that you
do not secure it at the beginning
and at the end of the seam
because we're going to be using it to gather the bottom of the hat
to bring it to the same size and measurement as the top of the body.
We will do this gathering technique on both the back
and the front of the hat,
the front being the one with the ribbon.
Now grab the rectangular pattern piece and fold it in half.
And if you're working with natural materials,
finger pressing will be just enough.
Then grab the front of the hat,
get the ribbon out of the way,
take the rim of the hat,
Place it like so so the raw edges of the rim
are facing the raw gathered edges of the hat.
Now this piece is going to be a little bit wider than
the hat itself and that's all right.
We're going to cut off the extra that we don't need and now
let's stitch it down with a straight
Now for this step stitching within
stitch within the seam allowance.
the seam allowance instead of stitching
right on top of the seam allowance is going to make it easier for you
to hide all of the stitches once we put the ornament together.
Now we're going to attach hats to the bodies.
The hat with the ribbon and the
rim is going to be attached to the beard
so you're going to place it like this.
Right sides facing. There we go.
And before you do that, you can snip the ends of the rim that
are peeking out because we don't need them.
And the hat that's just by itself, you're going to
place it right sides together with the back of the body,
align it, and stitch it once again.
Here's what we have once done with this part.
Next, let's open up the front pattern piece.
We will also open up the back pattern piece,
but on the back pattern piece it's easier
if you press the seam allowance down.
After that, place the ribbon on the inside of the project.
And bring these right sides facing.
First I like to pin right here at the top then bringing the
sides together. Here at the bottom you can mark
for yourself about a inch and a half maybe two
inch opening that you want to leave
so that way we can turn this right side out. When working with
faux fur especially one that's that long you will need
to gently tuck it into the inside of the
Of the project.
Of the project.
So that way it doesn't get all caught up in the seams.
And now we're going to stitch
from one side of the opening to the other.
Next reach to the inside, grab the ribbon and then pull it through.
There we go our little guy is starting to take shape.
Next I'll grab a little bit of stuffing
but I'll start by stuffing just the part of the hat.
Grab the nose and a hand sewing needle
and we're going to stitch it down right here placing it
underneath the rim of the hat.
This part is definitely a little bit fiddly, so if hand
sewing is really not your cup of tea,
perhaps you can opt for some glue. However, if I were
you I would actually cut out a little bit
of that fur where the nose is going to sit,
otherwise the glue is going to have
a really hard time sticking to the fur.
Once the nose is attached let's go ahead
and fill the rest of the body with the stuffing.
Next, bring the seam allowances of the opening
to the inside, so fold them in.
There we go. Then bring both sides together
and finish it off with hand sewing stitches.
Now at this point you can certainly be done
but I personally like to add
one more little thing
because I truly think that it sort of completes the entire look.
Now I don't have a pattern piece for it because it really is that easy.
Simply grab a little scrap piece of fabric
and cut out a rectangle like this one.
Next, decide which way you want his little hat to lean.
This way or this way?
Now insert your needle into the hat.
Bring it out, pull it through the knot
so that way it creates a loop and then tug on it.
Continue doing that multiple times with different length stitches
so that way the hat sort of tilts
towards one side.
This area will need to be small enough to be covered by this little
patch that we cut out.
Now simply use hand sewing stitches to attach it in place.
Make it look like a little handmade patch.
That's the whole magic of this little added element.
Well, there you have it. We made our gnome ornaments.
It seems like when it comes to the gnome
ornaments, everything is quite straightforward.
So let's move on to the last, but certainly not
the least, the ornament with which it all started.
This was the first ornament tutorial that I ever
posted on the channel.
It was many years ago, so tutorial wasn't necessarily the best quality.
So these are cute ornament hearts that we're going
to make together right this very moment.
These are the easiest out of this whole lineup
and super cute.
First, choose your fabric.
And in my case, I will go for this nice medium-weight linen
and one side of it I will overlay
with this polka dot gold organza.
Next, we're going to choose the shape.
This time, just a simple heart will do.
You will also need some stuffing for the ornament
and a ribbon or a cord for the loop.
Cut this one to be about nine and a half inches long.
Now, on one of the rectangles,
go ahead and trace the heart with a heat erasable marker
or with a water soluble marker, whichever one you have.
The other rectangle I'm going to overlay with organza,
but of course you don't have to do that.
Just use fabric that you like.
Then take your loop and we're going to position it
right here in the dip of the heart.
You can pin this in place for right now
so that way it's easier for you to work.
Next, flip these two to the other side.
Place this heart right on top of it
and then take hand sewing needle and thread
and let's start basting all the way around
but we want to leave a little opening.
When you're leaving this opening do not cut your needle
and thread just yet. Now use this opening
in order to stuff your Christmas ornament.
You definitely don't want to stuff it too much,
just enough to give it a nice plump shape.
When you're done continue basting all the way
To enclose the ornament, add the sewing machine
with a regular straight stitch.
We're going to sew right on the basted line.
If you do have a machine that can do a knotted backstitch
instead of a regular backstitch, go ahead and opt for that.
It's gonna give you a better look.
First, we're going to remove the basting thread.
When done we can start by trimming away the extra.
I usually leave about I would say a quarter of an
inch maybe one eighth of an inch
but when you're doing that be very mindful to not to trim
this little loop over here.
So here you're going to be trimming in a single layer. And that's it
you're done. Now if you'd like to you can apply some fabric glue
or mod podge on the edges so
that way they don't fray or you can fray them on purpose.
And there you have it a very simple
And a very cute ornament.
Now I certainly hope that you did enjoy
these handmade ornament ideas, and if you need more
inspiration for your holiday mix, then click right over here.
Thank you so much for watching,
and until next time, happy, thoughtful sewing.
I'll see you very soon.
Bye!