How I Built My Backyard Water Fountain

Mini World Craft
6 followers
AI Generated·May contain errors
Video Summary
AI GeneratedA DIY guide on building a custom water fountain featuring a glass backdrop, a recycled wood frame, and a hidden water reservoir. The creator details the entire process from excavation and framing to plumbing and lighting, sharing practical tips and mistakes to avoid for a successful backyard installation.
Hey guys, this video is an overview
of how I built this custom water fountain.
I'm not a professional
by any means but I will try
to elaborate on the process.
At this point I'm just marking out the location of the fountain.
This is going to be where the main
water storage container will be.
We're just removing the turf and removing dirt.
The hole is going to be about two feet deep,
one and a half, two feet deep.
I'm using the 27 gallon storage bin that you find
at your local hardware store like Home Depot.
This one came from Home Depot.
It's the HDX brand and my son wants to come and play in the dirt.
Now I'm cutting
the concrete forms
to the specified
height that I need
and here I'm
using this reclaimed wood that I got
from an old bed frame that I didn't want to discard.
I'm
It was perfect for this application as the main frame for the fountain.
starting
I'm just sanding off
to
the old stain off of it
speak
and now I'm using
now.
the wood putty
to fill in the holes
from the bed frame hardware like the screws
that were in the wood to prevent water and
bugs from getting
into it and damaging
the wood. And here
I'm screwing some
screws into the bottom of the wood to be used as an anchor
because this portion of the wood
is going to be placed inside the concrete
and I want it to be sturdy within the concrete.
So the concrete will be drying around the screws.
And I'm just using primer
to paint the bottom of the wood
as they will be placed in the concrete. It helps to prevent
moisture from setting in and bugs from getting in.
Here I'm just
measuring the width of the fountain.
I'm marking out where the concrete forms are
going to go. They're going to be the main support for
the fountain and the frame of the fountain.
Just
making
sure that
the dirt
is level.
This is the
finished
product.
And now I'm going to be applying the
Upper portion of the frame, the top portion,
I'm using a redwood here, just pre-drilling
and securing it onto the main board.
Now I'm measuring the width once more
because this fountain will have a glass backdrop
and it needs to fit snugly in between those two side pieces.
You can disregard that slanted line that I have on the inside there.
I was more focused on the outside line
because that's where I was making that cut.
Here I'm doing a final cut
and then we're going to be securing this piece of the wood
onto the top portion
of the frame.
Now I'm just measuring the width of the glass
and if it's as expected and I'm going to be
cutting this aluminum c-channel.
To my specification the c-channel is about a half an inch
or 7.75 inches.
The glass is going to slide inside of it
and it's going to be secured by these aluminum
Even on C-Channel pieces.
on each side of the frame.
I'm also going to be putting a
rubber foam liner inside of the
c-channels to help prevent the glass from scratching
and also it helps it to fit more
snugly. So here I'm putting the foam in and then we slide
the glass into the aluminum c-channels
making some final measurements.
I'm going to be applying
these two rectangular pieces
of board underneath the glass to secure it
so that it's partially floating on the frame.
I didn't want the glass to be sitting on the floor.
And then here we're going to be securing both sides of the frame
so that it doesn't move while we move the glass to its
final resting place. So here
the fountain is seated and it's level.
Level on all sides. I'm going to go ahead
and start mixing the concrete.
This concrete is going to go inside
the concrete forms that we were preparing
earlier to secure
those main main beams of the
fountain.
So now I'm just applying
the concrete.
I'm using these pieces of wood to level off the concrete
and remove any air bubbles that might be residing inside of it.
Now we're just
cleaning up the tools.
At this point, I'm drilling holes on top of the storage bin,
which will be used as the main water storage location.
The holes allow for the water to be reclaimed
and recycled through the system over and over again,
as you'll see shortly.
So here I'm just boring a hole into the container.
So that I can slide this 10 foot
by 1 inch diameter vinyl hose through it.
I'm securing it
with some clamps.
I'm just
cutting the
PVC to the
specification
that I need.
You can see that one end of the PVC is capped off.
And I'm going to be using this corrugated plastic sheet.
It's a 2 millimeter width rectangles.
I'm going to be using an angle grinder to cut.
A path into the PVC pipe
so that I can insert this corrugated plastic.
This will be used as a water spillway,
a cheap but effective water spillway.
And here I'm going to apply silicone
on the outside of the corrugated plastic to make
it watertight.
So there's no leaks.
So here we are.
That's how it looks.
Now I'm going to apply it
and test it.
This portion of it works at this point.
I wanted to make sure the angle of the spillway
is allowing the water to flow down along the glass.
I didn't want it to just free fall onto the ground.
I wanted it to flow like a river.
And now I'm going to be adding some holes into this PVC
because I wanted a second effect
of raindrops to be falling.
These are going to be falling straight down to the ground.
And I'm using these rain drop nozzles.
These nozzles are from Glenco Fittings, part number 011307.
You can find it on their website
at Glencoe Fittings.
I've had a hard time finding anything like that at a hardware store.
Here I'm just inserting the raindrop nozzles
and these are some measurements of the fountain
and the straps that I use for the hose.
And at this point I have some remaining
redwood for the rest of the frame.
I'm just using the wood putty to fill in any nicks.
and knots that might be in the wood
or any damage that occurred at the store and once it dries i'll
sand it and it will be one smooth piece of material
and now i'm starting to use the pvc
cement and just finalize all
the connections make sure they're water tight and secure it
and just installing
the remainder
of the clamps that i
need for the pvc
piping we're going to
We're going to be testing the fountain again
and this is how it sounds at this point.
The water is flowing up the vinyl hose
and through this custom spillway that I made.
And now I'm going to be removing the lid of the storage bin.
And you can see the pump there on the left side.
It's a Haige 1060 gallons per hour, variable speed,
24-volt water pump, which I got from Amazon.
And now we're just trying to finalize
and get measurements for the rest of the frame.
That's going to be covering the glass.
I'm also going to be installing some LED lights around
the perimeter of the frame.
At this point, I'm just aligning the pond liner.
This will basically be used as a tool
to recollect all the water that's falling,
make sure the water is being reclaimed into the storage bin.
I did make a little bit of a mistake here.
I cut the liner too close to the bin,
so when the water is falling, it's falling outside of the pond liner.
And I lose some of it due to evaporation.
So it's best to run the fountain and see how far the water splashes.
And then cut your pond liner at that point to reduce water evaporation.
So I just finished staining the wood.
That's another mistake that I made.
The way that it was stained,
you're supposed to apply wood conditioner first.
And then go ahead and stain the wood.
It comes out much better.
And that's something I'll show in another video
when I built my planters.
that are next to the fountain. the staining
on that came out pretty well pretty good.
here i'm applying the led lights. i've actually had
to change these led lights about three times
already. initially i was using the standard ones you find
on amazon that are rated for outdoor but
eventually these would fail. i ended up getting one
from this company called american lighting.
my wife actually bought it from costco
and i saw that it was water resistant.
And I actually started using it
and it works great and it has a lot of features.
That's not what's in the video at this point.
You'll see that in the end of the video.
It's an American Lighting Neon Flex 16.4 feet LED light strip.
It's also available on Amazon
and it does seem to be more rated for water than the standard
LEDs that you find on Amazon. So here I'm making
the final measurements and additions to the frame.
And also to note if you're planning to do projects
in your backyard it's good to consider all the conditions of the yard
because I had to actually dig a trench throughout my yard
and send electrical PVC down the center of my yard
so that I can eventually have an electrician give me power on this side
of the yard where my fountain is so that I don't have to use
an extension cord all the time and I'll show that in the video as well.
These are the original LED lights at night in
the fountain so I had to run a trench along this
arrow before we put concrete down
and this was used to run electrical wire which
eventually became an outlet that I can now plug the fountain into.
So this was in August of 2020 when I finished building it
and now we're in 2022 and this is
how it is at this point and if you're liking
the video please don't forget to like and subscribe.
And please leave a comment
and let me know what you think of this project and any changes that I
maybe should have made.
These are the new LED
lights in the fountain,
the American lighting.
It has a lot of features and it's been lasting a good
amount of time.
Thanks everyone
for watching and enjoy
the rest of your day.
