Insane Sweet Potato Harvest from Discarded Old Tires
You'll never believe how many sweet potatoes we harvested from a few old discarded tires! Instead of throwing them away, we turned them into productive growing containers that produced an incredible harvest.
In this video, you'll discover:
• How to turn old tires into highly productive sweet potato planters
• The simple soil mix that encourages bigger, healthier tubers
• Easy planting and care tips for maximum yields
• The complete harvest reveal with surprisingly large sweet potatoes
Perfect for anyone interested in container gardening, recycling old materials, homesteading, and growing more food in small spaces. This simple DIY method is inexpensive, beginner-friendly, and can produce an amazingly abundant sw
#gardening
#johngarden
#garden
AI Generated·May contain errors
Have you ever planted sweet potatoes
by placing the tubers directly into the
soil, caring for them,
and waiting for harvest only to be disappointed with the
results? Today I am going to share
a new way to grow sweet potatoes that helps
reduce moisture loss,
requires less maintenance and weeding, and can produce
surprisingly good results.
Watch until the end of the video to see exactly how
How it is done.
First, I do not plant the sweet potato tubers directly.
I use them to produce sweet potato slips for planting.
I place these healthy sweet potatoes into the soil horizontally,
burying about half of each tuber.
After about two weeks,
we should have sweet potato slips ready for planting.
Next, I will reuse these two tires as growing containers.
Each tire is about 50 inches in diameter.
I will fill them with soil mixed with compost.
Since both tires are quite large,
they require a substantial amount of soil.
Sweet potatoes grow best in loose,
well-draining soil that does not become compacted.
After filling the first tire, I level the soil surface.
I do the same with the second tire.
It may take about five
or six wheelbarrow loads of soil to fill both tires.
Once they are full, I dig a small hole about six
to seven inches deep in the center of each tire.
Next, I use two 1.5 liter plastic bottles joined together.
I make many small holes around the sides
and leave the top opening uncovered.
Then I place the bottles into the holes and cover the sides with soil.
These bottles will serve
as homemade kitchen waste composting tubes for the plants later
on.
Each tire has one homemade composting tube in the center.
After that, I continue adding more soil on top.
I use a different method from ordinary planting
by building the soil into a high mound, creating
more vertical space for the sweet potatoes to develop.
I pile the soil up high and press it lightly to keep the mound stable.
Next, I insert several small wooden stakes diagonally
into the soil from different directions.
Do you know what they are for?
They help reinforce the mound
and prevent the soil from slipping or collapsing when
it is built this high.
I repeat the same process with the other tire,
growing sweet potatoes in a raised mound like this
also improves drainage
and reduces the risk of waterlogged soil and tuber rot.
It can also limit unwanted secondary rooting along the vines,
helping the plant direct more energy toward the main storage roots.
Once the soil preparation is complete,
I cover the entire surface of each tire with a sheet of plastic mulch.
I cut a round hole in the center
so the composting tube can pass through the covering.
Then I use a wooden stick to push the outer edge of the plastic down
along the inside rim of the tire.
The plastic covering helps retain moisture,
suppress weeds, warm the soil,
reduce erosion and compaction, and limit secondary rooting
along the sweet potato vines
so the plant can focus more energy on developing the main tubers.
This method also requires less maintenance than conventional planting.
Finally, the setup is complete.
These are the sweet potato plants I started from tubers two weeks ago
to produce planting slips.
Growing sweet potatoes from slips helps them root quickly,
develop more evenly, use less planting material,
and usually produce better shaped tubers
than planting whole sweet potatoes directly.
I have just cut the healthiest and strongest vines for planting.
I will use scissors to make small pointed openings in the plastic sheet
so I can insert the sweet potato slips.
Each healthy cutting should be about four to five inches long
and have four to six nodes.
It is best to use the tip
or a moderately mature section that is neither too young nor too old.
Then I insert it deeply enough into the soil
so it can root more easily.
At this stage, the role of the plastic covering becomes even clearer.
It helps hold the soil and the cuttings in place
while retaining moisture.
As a result, the nodes can form roots more quickly
and are less likely to dry out during the early stage.
Finally, I lightly water all the leaves
and pour some water into the kitchen waste composting tube
to provide the plants with their initial moisture.
Five days later.
The wilted sweet potato cuttings have become fresh and healthy again.
Let me show you more closely.
New leaves have started emerging from the nodes along the vines.
You can also see a thin layer
of water collecting on the plastic surface,
showing that moisture is being retained during this stage.
Ten days later,
the leaves have grown larger and the vines have become longer.
After 20 days, the sweet potato
vines have grown quite long.
Some have reached about 15 inches.
And many side shoots have also developed.
At this point, I need to trim some
of the vines that have grown too long.
You can see that secondary roots have
already started forming along the vines.
Trimming helps control excessive spreading,
keeps the growing area open and manageable,
and encourages the plant to produce more branches.
After trimming, I will pin the sweet potato vines down.
Watch carefully how I do it.
First, I cut a small slit in the plastic sheet,
then I guide the vine through the opening,
lay it close against the soil surface,
and use a flexible pin to hold the vine firmly
in contact
with the soil.
These are water hyacinths.
Let me show you what I do with them.
I chop them into very small pieces, then spread
them out in the sun to dry and reduce their
water content.
The next day,
I gather the dried water hyacinth
and add a small amount of trichoderma.
Then I mix everything thoroughly.
This becomes a nutrient-rich, organic material for the plants.
As you can see, I place it into the opening of the composting tube,
so the sweet potatoes can gradually receive nutrients as it decomposes.
Water hyacinth contains organic matter along
with minerals such as nitrogen, potassium,
phosphorus, calcium, and magnesium.
Potassium supports water movement and tuber development.
Nitrogen helps the vines and leaves grow,
and phosphorus supports the root system.
Once the water hyacinth has fully decomposed,
its organic matter also helps loosen the soil,
Retain moisture and increase microbial activity.
After 50 days, I continue trimming the sweet potato vines.
They have spread across the ground
and many secondary roots have also formed.
Removing some of the vines at this stage is important
because the plant is beginning to
focus more of its energy on developing the main cluster
of storage root. I do not cut away too
much. I only remove vines that are excessively long,
old, or spreading too far across the ground.
These are all the sweet potato vines I have cut off,
but I am not going to throw them away.
I will continue making use of them.
First, I cut them into small pieces,
then I place them in a large container
and add a small amount of Trichoderma and water.
I will ferment these vines into organic fertilizer.
After about 7 to 14 days,
the mixture can be diluted and used to fertilize or water plants.
This is the liquid from the kitchen waste I fermented earlier.
I will dilute it with clean water
and use it to fertilize the sweet potato vines.
I pour the diluted liquid directly into the composting tube.
As the liquid moves downward, some of the dissolved nutrients
seep through the holes in the tube and into the surrounding soil.
The young roots and root hairs growing nearby can
then absorb those nutrients.
After 90 days,
You can see that the sweet potato vines have grown extremely well
and almost completely covered both tires.
At this stage, I still need to trim the growing tips one more time
because the plants need to focus
their energy on developing the tubers.
I carefully remove some of the newly emerging shoots.
The sweet potato vines have now become too dense.
So I need to build a simple support to lift them off the ground
and improve air flow underneath.
I drive two vertical wooden stakes into the ground
and place one horizontal pole across the two tires.
Once the support is finished,
I lift and arrange the sweet potato vines over it.
After four months,
the sweet
potato plants
have matured.
The leaves have turned yellow and started to wilt.
Now it is time to harvest the sweet potatoes.
I will begin by tearing open the plastic sheet here.
Can you see it?
The first sweet potato has appeared.
Here is another one.
There are so many tubers.
The sweet potatoes are holding quite firmly in the soil.
I will continue searching on this side. Hahaha
This one has a very unusual shape,
doesn't it? For the other tire,
I will cut away all the vines and leaves on the surface.
After removing the entire plastic covering,
you can clearly see the sweet potatoes underneath the soil.
There are quite a lot of sweet potatoes in this area, aren't there?
The tubers have developed from the upper part all
the way down through the soil mound.
There are so many of them.
I will continue digging so you can see more clearly.
You can see that some of these sweet potatoes are quite long.
These are the tubers that developed in the lowest layer of the tire.
Now it is time to enjoy the results of all this work.

