Made Pottery With NO Tools In Ancient Vounous, Cyprus

Survival skills
20 followers
AI Generated·May contain errors
This is just dirt, but thousands of years ago,
the people of Vounous transformed earth like this into vessels
that held their food, water, and so much more.
Today, I'm going to travel back in time and try to recreate
that ancient process with nothing but earth, water, and my bare hands.
Vounous is a cemetery hill located at about 700 feet above sea level
in the central northern part of Cyprus.
Pine forests and rugged limestone peaks cover
the Carinia Mountains to the south,
and the warm waters of the Mediterranean Sea lie to the north.
Pottery dating back over 4,000 years ago
was recovered from limestone tombs
on the Vounous Cemetery Hill, providing a glimpse
of the creations people made at that time.
Using only primitive skills,
I am going to use the naturally occurring resources
in this beautiful wilderness to make simple tools
and my very own Vounous Pottery.
There are several different types of clay in this area
but the most abundant source of clay that I
have found is in this deep rut eroded in this hill by rain.
It has a deep layer of soft gray greenish
clay that is
very easy
to extract.
There is a lot
of chert
in this area.
Chert is an
excellent
stone
for flint knapping. A simple stone tool can easily
be made by striking the edge of a large piece of chert
with a hammer stone.
I have to be very careful.
When flint knapping, when trying to
Break stone like this to create
a nice sharp edge that I can use a nice flake
Because a few days ago I was doing this I smashed my thumb
Really hard it hurt really really bad for a few days, and I don't know
But it appears that the fingernail may come off
which I'm not looking forward to so I'm hoping for the best
But it was just it was really weird may have
been the jet lag from the travel or something
The moment before impact my thumb just went right
in front of the point of impact and I nailed it so
hard. So I'm going to try
to avoid that today.
I've got some pieces that can
work for very lightweight
cutting. This
is promising.
This here
is actually
a nice edge.
That worked.
Another
usable flake.
One's not good. I'm often asked why I don't make
a nice stone knife or axe with a wooden handle.
The short answer is that breaking flakes like
these are usually good enough to get the job done.
Broke the hammer stone.
It's okay, I have plenty of flakes.
Don't
need
a break
anymore.
Giant cane, Arundo Donax, is native
to the Mediterranean region
and is very common here in Cyprus.
I'm very familiar with giant cane.
I used it in the construction of my hut
and for making tools and fish spears.
But today, I'm going to use it
for a completely
different purpose.
The best way to cut giant cane is to cut a score line
evenly around the circumference and then just snap it.
This will create a nice clean cut.
If you try to break it without scoring it,
then
it
will
splinter
and be
extremely
difficult
to
break.
Giant cane is hollow except for a thin membrane at each node.
A long thin stick with a sharpened point can
be used to break open the nodes.
By leaving
the bottom
node intact,
a long segment of giant cane becomes a useful container to carry water.
In the springtime this spiny broom bush will
be covered in showy yellow flowers.
In the late summer it is completely barren.
I produced a blister on my finger from too
many hand
drill
friction
fire
attempts.
I'm going to
use a thorn
to drain it.
I normally
wouldn't bother adding any ointment
but I know that a lot of people would be concerned about
infection. So I'm going to show you
a natural antibacterial ointment that can be used.
Pine sap has natural antibacterial properties
and can be used to treat and protect minor
skin
cuts.
It feels
so much better now
that it's drained.
The relatively flat surface of this rock will be my pottery workshop.
A sturdy branch shaped
and hardened at one end
makes a good walking stick
and digging
stick.
This will be the most tedious part of the process,
but grinding the clay into a powder
This powder will help it absorb water evenly and prevent clumping.
Furthermore, I want to add some kind of a temper
to it to prevent cracking during the firing process.
This
seems
to be
decomposed
limestone
which
has
a
high
level
of
calcium
carbonate.
I'm not
sure
how
well
this
will
work
as a
temper
or
aggregate
with
the
clay.
Actually not quite sure what it is.
It kind of seems like some kind of soft decomposed limestone.
Which I normally wouldn't want to use in my pottery,
but since I'll be firing at a low temperature
and not for a very long time, I think it'll work out okay.
This is my first time processing clay here in Vounous
and making a ceramic bowl.
So, first time using this.
I'm not sure what ratio to use of clay with an aggregate.
So, I'm going to probably test out here.
It's going to be probably one to three.
Three parts clay, no, I'm gonna do.
Two parts clay, one part aggregate.
See how that works.
Approximately, that is.
Once it's
thoroughly
mixed
together,
then I just need
to add some water.
Water should be added very slowly to avoid runoff.
Using a container to mix clay and water together
is a big advantage.
I'll
mix
this
very
thoroughly
and also allow it to sit for a little while.
Half an hour to an hour,
just to allow all the molecules to absorb the water.
At this point,
I think it
has plenty
of water.
And I'm just going to let it sit for just a little while.
That'll help to solidify it,
make it nice and firm, and easier to work with.
This clay looks and feels a lot like
a green illite clay I find at my newest hut.
It has very fine particles that produce a smooth texture,
but it has very low plasticity,
which makes it very difficult to form into shapes.
While this is sitting, it'd be a good idea to cover it.
That'll help prevent it from drying out.
And in the meantime, I can process some more clay.
It's pretty much empty.
I've prepared
another pile
of clay mixed
with an aggregate.
And I'm going to add water.
Now this new ball of clay, I'm going to let it rest here.
And the moment of truth is now.
I'm going to see if I can turn this ball of clay into a useful object.
An advantage of illite clays is that they are non-expanding,
therefore they resist cracking while drying.
They can also be fired at lower
temperatures than other clays. At my hut I recently began mixing the
green illite clay with a clay of high plasticity at a
ratio
of
50
50
and
it
works
very
well.
This ring that I used, I made out
of the flexible branches of a certain tree.
I'm not sure what the name is. I'm told it's an invasive tree,
but it's very flexible branches like a willow.
And so I just weaved a bunch of those together
in a circular pattern and made
this ring.
And the purpose of it is just to hold
the shape of my very fresh piece of clay
here, uh, to form a bowl shape.
And so it'll dry in this position.
And then when it's firm enough, I will start to add more coils.
Acacia Saligna is the name of the tree that I use to weave the ring.
And I fill my little containers with some more water.
So this is going to have
to sit for a little
while until it firms up,
which shouldn't take too long, maybe a couple of hours.
And then I'll be able to continue adding coils.
Well, now
I have the
beginning
of a small
bowl.
Needs a little bit of touch up,
but those are just cosmetic flaws.
The idea is to create a small vessel that can hold water.
At this point
I'm going to add
small coils and
slowly build
it up to the
desired size.
At this
point
I have
a very
rustic
bowl.
I could
just let
this dry.
Maybe have to touch it up a little bit as it's drying.
I could take a small stone
and polish it at various stages during the drying process
to create a nice smooth surface.
But as it is right now it can have a function.
In survival, you start by just making useful things
that can be made quickly and put to use.
From there, you can expand, you can grow,
you can create better and better items.
Bowl is coming along nicely. It has to set
a little bit before I can add another coil, so I'll
be working on this little by little just to create
a slightly bigger bowl. I'm just going to use
The amount of clay that I still have left here
which will be able to probably raise the height
of this about one more inch. The Vounous Hill
was a huge cemetery from the Bronze Age.
In the 1930s archaeologists excavated 164 tombs
and found the remains of the ancient
inhabitants of this land as well as pottery
and other artifacts that provide clues
to how they once lived.
Today the findings are in museums around the world.
The annual Vounous terracotta symposium brings
their history to life again.
A good reason why the people of Vounous
chose to dig the tombs on this hill
is that the limestone is particularly soft here.
While hiking over the Vounous hill I found
a slab of soft limestone on the surface.
Who knows, maybe there is a tomb underneath.
I finished
the small bowl and now I
am polishing it with
a fairly smooth stone
while it continues to fully dry.
The polishing not only gives it a smoother texture
but it also strengthens the material by pressing
the clay particles more tightly together. Due
to strict fire restrictions in wilderness areas here
I am going to fire my pottery at the Vounous Symposium.
I had made several friction fires here
using the hand drill method with a piece
of driftwood I found by the sea and an acacia branch
For a spindle.
At Vounous, I had also made a larger pot
and lid using a different kind of clay.
I painted a red slip on it
and scratched out a simple drawing around it.
The potato-shaped piece with a Z on it
is supposed to be just that, a potato.
It's an inside joke from one of the artists here at Vounous.
I am firing all the pieces together in this fire pit.
After the pieces have heated
and fully dried for about an hour over the coals,
I stack wood all around and let it burn for a solid half hour.
During this time, I periodically blow air
into the base of the fire to increase the temperature.
After it has been burning hot for at least half
an hour I don't add any more fuel and just let
the flames die out. After cooling the pieces could
be removed from the ashes. Unfortunately
I had run out of time and I didn't get to hold the finished pieces
but the bowl and pot all
turned out great with no cracks.
The potato however blew off a layer of clay during the
early stages of the firing.
It may have still had some moisture trapped inside, who knows,
but I'm happy that the other pieces turned out great.
