How make a wrist corsage - Wedding Flowers Tutorials and Workshops by Campbell's Flowers & Design

Floral Harmony - The Art of Flower Arrangement
13 followers
1 Video View·Nov 14, 2026
AI Generated·May contain errors
Hi, I'm Tracey from Campbell's Flowers
and today we're going to be making a wired and taped wrist corsage
which uses the techniques
which we've already shown you in one of our other previous videos.
These little corsages are just really lovely
for wearing to proms or weddings
or just maybe a very special occasion like a ball or a special dinner.
First of all, I'm just going to wire
and tape a couple of these Lisianthus buds.
And just to refresh your memory on how we how we do that,
so we make a little hairpin and we
go around three times like that. So make the little leg mount,
cut the stem very short like
that and then pull the tape to start it off.
Pull and twist. As I say, if I'm going a little bit quickly,
don't panic because we'll show you
how to do this really, really slowly
and really carefully in lots of detail in our other video.
Let's do another piece like that.
And I usually like to kind of pull just a little piece of this
tape off rather than try
and work with this because it's quite heavy and all these little
bits and pieces that we're working
which are quite delicate. Like this, one side.
Now we're just going to put it all together,
trying to create something that looks quite fresh
and quite simple, not too complicated.
I'm going to take the piece of ruscus because that kind of
forms the backbone or the back of the design
and then I'm going to... Lisianthus
Lisianthus buds first. So put
those in to one side, Lizzie, and this
Tape is fantastic because you can see I'm
just squashing it together with my fingers
and it's holding really nicely but it's lovely
and flexible because if you put something in the
wrong place just take it away and put it where you want it.
Obviously not the hair but you can
see just how easy it is to move stuff around
if you're not happy with the shape of your design
and then I'm going to take a piece of wax flower
and put that to the other side to balance the
So you've got a nice...
The shape coming, slightly sort of triangular,
so it starts a little bit more pointy at the top
and then it just sort of comes down into a nice shape.
Like that.
Your focal flower is the daisy chrysanthemum,
which goes in sort of at the front, but at a slight angle.
I'll just move that bit there,
I'm not very keen on the way that that's forming.
There we go. That's better.
That little bud's getting a bit lost, just take that out.
You can just move things around as and where you want.
Really great for...
Beginners, there we go, it's pretty much the design done,
you can see I'm just forming it all together,
the warmth of my fingers
and my hands are just making it all stick together nicely.
Put that down, get my piece of tape
and just stretch it again like we have been doing, put it at
the back, give it a pull and a twist.
Don't need to go to the bottom
because we're not going to use all of what's left over at
the end there.
Pick your ribbon.
We've got a piece of ribbon here which is
About 70-80 centimetres,
half a metre is a little bit too short and a metre is usually
a little bit too long, so somewhere in the middle would be good.
And then if you just pinch it in the centre like that,
so that it's kind of half its width,
that just makes it a little bit easier to deal with,
because when it's really wide it
looks pretty but it's a bit difficult to deal with.
So put it to the back of your design and then take that over.
Pulling it twice is quite good because it's nice and firm then.
So you can see that I'm pulling it quite tight, like that.
And then you just want to knot it into place.
A little bit difficult.
There we go.
Pull it nice and tight. Don't worry if it moves around your workbench.
The most important thing is that it's nice and tight.
I'm going to give it a really good tug and then it can't go anywhere.
You can knot it a second time if you want to.
I tend not to because I think it makes it a bit bulky and a bit ugly.
That should be more than tight enough. It's just going on your wrist.
And then we need to cut this down
so that we have a nice professional tidy finish.
And we want to cut this as short as possible.
So I'm going to cut it to about there.
And I'm cutting that at an angle.
Again, because the finish is nice and tidy and because you can see
that that's got a sharp edge to it because we've used all those wires,
I'm just going to put that over the top, give it a twist,
just wrap it over the bottom nice and tidy
and then the kind of test is just to tap it with your finger
and you can feel that there's no sharp edges.
And there we have a very pretty
but very simple wrist corsage.
Thanks so much for watching,
I hope you've enjoyed this tutorial and if you have then
please like and share
and if you happen to make any of our designs we would absolutely
love it if you get in touch and let us know how you got on.
Thanks so much again, bye!
