WORLD’S LARGEST Beechcraft Starship 25% Giant Scale

RC - Aircraft
13 followers
Nov 7, 2026 #entertainment
AI Generated·May contain errors
Video Summary
AI GeneratedThis video features a massive quarter-scale RC Beechcraft Starship built by the late Merlin Graves and refined by pilot Thomas White. The aircraft is a technical marvel, measuring 12 feet long with a 153-inch wingspan, showcasing advanced engineering and a successful flight demonstration at Pegasus RC in Maryland.
Hi friends, welcome to the Plane Fun RC channel.
I'm your host Saul. We're here at Pegasus RC
in Hagerstown, Maryland. This happens
to be a lazy Saturday and look what showed up.
Thomas White and the amazing Merlin Graves
Beechcraft Starship quarter scale. Thomas,
you were telling me it's 12 feet long,
153 inch wingspan. Is that correct?
Somewhere around there.
Fantastic. So now I'm looking up front here.
Let's take a little walk around. Now it looks
like you've got a variable geometry elevator.
Tell me a little bit about that if you don't mind,
Uh, so, it's...
That's kind of my own magic on that one it's just like the full scale
which is very similar to an
F-14 that's what four degrees forward swept
when it's out for takeoff and landing and then cruise
flight it goes back to about 60 degrees of sweep
so it's just like an F-14 wing it goes forward or
backwards it's all electronically controlled it's
on a two position switch so it's not a whole lot
There's a whole lot to it.
Normally you see a full-scale Starship they fly
with the canards swept all the way back.
This one doesn't really take off that well with it swept back
so I have it set up to where that
is basically your landing flap.
You unsweep it for low speed and then you sweep it back
at cruise flight for just flying around
which is still kind of getting worked out.
Now you've got this tied in with the flap.
Show me, let's walk to the back of the plane for a
second. This has actual functional fowler flaps
is that correct? No this one doesn't.
Oh it doesn't. Oh okay okay I thought it did. That is a
That might be something that happens in the future, but probably
not anytime soon because it needs an entire wing redesign to do it.
The flaps on this thing pretty much make up
the whole 25% rear trailing edge of the wing.
With how it's designed currently, there's a wing spar
that goes right through the middle of those flaps.
It doesn't make functional flaps on it.
It's just not feasible at the moment, structurally-wise.
Yeah, I mean, it's a big airplane,
twin DA-85s with custom headers and canister mufflers,
with their K&S canister mufflers,
measure like 24-10 conventional rotation propellers.
The DA-85s have reverse rotation on them,
so I can use regular props, since there's
a lot more selection for props that way.
Now, the spinners, those are handmade, is that correct?
These are true turn spinners.
Oh, okay.
My handmade carbon ones.
I tried an experiment like I always
do with a carbon fiber reinforced 3D printing filament to sit there
and see if maybe I can make that work.
Fortunately, it didn't work, so I'm going to have
to have some custom aluminum backplates made for those.
But you've got 3D printed exhausts here, is that correct?
Everything on the nacelles of this airplane is composite.
That's the law that says it.
The exhaust nozzles, they're fake,
they're fiberglass with a carbon reinforcement,
all the cowls, all the nacelle skins, it's all fiberglass stuff.
I 3D printed the molds,
laid everything up in the molds with fiberglass and whatnot.
Um, the canards are composite,
but everything else on the airplanes, wood, fiberglass, like
a conventional airplane.
Give me a stand over here at the three quarter, if you want to mind.
So the folks at home just get a perspective
on just how big this plane is here.
Uh, you can see Thomas over there standing there.
Just a massive plane, folks.
Absolutely huge.
We're very excited to be here today
to see such an amazing aircraft fly.
Once again, folks, Thomas White,
if you're not familiar with him, he rebuilt the Mack
Hodges B-29.
He is a stellar builder and a stellar pilot.
And he's a full-scale pilot as well.
Delta Airlines, correct, sir?
Yeah.
All right, very good.
All right, friends, sit back, relax, and enjoy the flight.
Understatement here.
Massive Burt Rutan fan.
You can see this amazing aircraft, nothing short of wonderful.
So sit back, relax.
We're
there
for
a
second,
folks.
Thank goodness we didn't.
Folks,
it's an
absolute
treat
to see
such an
amazing
airplane.
If you're watching this at home, and maybe you're not into RC,
but this is just so appealing to you,
one of the best things you can do to get into it is look at eFlight.
E-Flight has the E-Flight Apprentice,
which is a great airplane to get into.
Gone ahead, you've
mastered flight.
You can go ahead and take a look at some
of the other aircraft that E-Flight sells.
Some of their aerobatic stuff, even the jets for that matter,
like their Viper or the SR-71 Ultra Micro.
But of course, keep in mind,
it's only after you've become proficient in terms of flying.
And over time, you can work your way up to something like this,
something this amazing.
Another great beginner aircraft is the Scout.
Keep that in mind, also available through eFlight,
and you can get that through Horizon Hobby.
Just wanted to make you aware of it.
We're all about promoting
the wonderful hobby here on the channel.
He's got gear down, folks. Sit back, relax.
Here we go. Big landing coming.
Look at that. Look at that, folks.
Folks, that's Starship Butter right there.
Thomas White, Starship Butter. You have got a plane that cool.
A pilot that skilled lands that smooth. I mean, what more can you say?
Just absolutely stellar.
Once again, folks, I am just jumping out of my shoes with excitement.
To be able to shoot this amazing aircraft.
He's done a lot to go through to really refine it
since it was built by the late Merlin Graves.
Look
at
that.
Awesome.
Awesome.
All right, friends, more to come.
