First episode in this mega-filter build for my large trout pond. Today we will take a look at the various parts of the filter and I'll explain how they are going to be fitted together to form a huge filter which will hopefully clear the pond. The next episodes will highlight the individual parts of the filter and have links to the gear I am using wherever possible. The parts / features of this filter will be as follows:
3 x Vortex 1 x Brush chamber 1 x Moving bed chamber (water driven) 2 x Bio / settlement chamber with crates of Alfagrog 1 or 2 x large shower filters filled with Biohome shower media and white pumice over more crates of Alfagrog 1 x Daphnia breeding chamber (+ possible Aquaponics chambers?) A nation of pipes, joints, taps, drains and features which should hopefully make the cleaning of the filter very easy - the goal is to use the sediment rich nutritious water drained from the filter to feed my lawn and garden borders.
If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects. Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching. See you next time. Pondguru
Hello there, welcome to the first part
of this ridiculous mega filter build for my pond.
In this episode, I'm basically just going
to run you through the various parts of the filter
and explain the direction the water is going to flow,
what's going to be in each particular section
and then in the next episode,
we're going to be starting to put it together.
Okay, that is the pond and as you can see, it's very, very green.
It's also got a lot of suspended sediment in it as well,
so the filter is basically to settle out that suspended sediment.
Right, before I start showing you all the different parts,
I'll just explain about the base.
The base is made really, really solidly out of...
3x3 posts, 4x3 posts, they're bolted in here, they're screwed in here,
they're also nailed in here, we've got external plywood here,
which is a hardwood board, so basically it's very, very strong,
and I've also got another base here, which is supporting...
One, two, three big containers, and we've got a base at the back
which is supporting another big container as well.
So in preparation for this build,
there's been a lot of woodwork going on here.
So the water's going to come up from the pond, underground,
and then it's going to go up here through this base
and into three of these fellas.
Now that's going to have the end cut off, and the outlet
is also going to be cut off as well to take a four-inch pipe.
And that is a vortex filter
and as you probably guessed it creates a vortex so water comes in here
spins around and around and around the heavy muck settles out
into the bottom water goes out here
and into our next section
and as I say there's going to be three of those linked up with pipes.
As I said this is going to have a four inch pipe
on it's actually going to be a 90 degree bend
so it'll fire the water this way along a four inch pipe
and that'll go into a big container here.
This big container will be filled with brushes,
and from there, the water's going to drop out
of multiple two-inch pipes down into another container here.
This container is actually going to have a moving bed filter, but it's
not going to be driven by air, it's going to be driven by fallen water.
At least that is the plan.
From there, the water's going to go through probably
at least half a tonne of alpha grog.
which looks like a lava rock it's actually
a ceramic filter media with most of its surface
area on the outside that'll be in big crates in here
then it's going to go into another
roughly half a ton maybe 600 kilos of alpha grog
then it's going to drop out of that far side
Uh...
just about here and from there it's going to go into here
and you'll have to forgive the state
of this obviously all of this stuff's going to come out
But this is a 3,000 litre tub and that's going to have a pump
in which will pump the hopefully clean water up to a shower filter.
That shower filter is approximately one metre wide
and it's got four tiers.
That'll all be filled with pumice and Biohome Ultra
or the new shower media from Biohome.
And then from there it'll drop out
of a four inch pipe down and back to our pond.
But I'm actually contemplating putting another part of the filter
into operation and that'll be to have smaller pipes coming out of here
into a shallow pretty big tub here which will be for growing Daphnia.
That'll be very slow flow in full sunshine underneath the oak trees
so it should be a perfect environment for growing Daphnia.
The idea behind that is that every
so often I can just open the bottom drain in there and drain the
daphnia off straight back into the pond to not only feed the small fish
but hopefully to also
help with the organic matter in the water
and also eating the algae in the water as well. Now every
one of these containers is going to have at least one bottom drain
and fitting those will involve me
drilling a two inch hole in the bottom
of the container somewhere convenient probably on that end
Putting this in which is a tank connector with a locking nut
and then fitting a big ball valve.
The idea behind that is then I can come
when I want to clean it out with a great big long pipe
with a two inch fitting on the end and just slot that straight in,
open it up and drain all the muck off here.
Now the entire volume of all of these things
put together is round about eight
and a half to nine thousand liters which is quite a big filter.
Obviously it's going to take a hell of a lot of filling.
There's going to be brushes and grog and moving bed. There's going
to be all sorts of different components to this particular filter.
I think 8,500 to 9,000 litres is roughly 2,000 gallons or thereabouts.
Maybe it's 2,500 US gallons. So there's going
to be a hell of a lot of water in the filter at any time.
But the idea is to have it moving fast
in certain parts in the vortex to settle the muck out.
and have it moving slow through the brushes
and the media to really just settle the muck out and
give it a long dwell time hopefully get all
of the very very fine clay dust that's blighted my pond
and then obviously we're going to have a notion
of biological action with all of the grog and also
the shower filter as well
and i think in that shower filter container that 1000 liter tub
I'm also going to put crates of alpha grog in there as well
so there's going to be a hell of
a lot going on. And this whole filter is going
to be a total breeding ground for the likes of
water lice, water shrimps, all sorts of larvae,
basically things that are going to feed the fish.
So it should be a really rich resource.
That water that goes back to the pond should be
really really good quality, oxygenated.
And it should be full of little creatures going to feed the fish.
Now I've got all of the main parts of this.
I just need to put it together.
So join me in part two
when we'll be concentrating on the vortex filters.