Introducing the filter you should have bought for Christmas.....the Aquael Ultramax 2000. Ultramax 2000 (Ebay UK): https://ebay.to/2CtS830 Ultramax 2000 (Ebay EU): https://ebay.to/2sHb9e5 (Check local fish stores and online retailers) Biohome filter media: http://www.filterpro.co.uk While it may not hold as much media as the largest in the Unimax range (700 holds 8kg) the Ultramax still manages to fit 6kg of biohome ultimate into the decent sized filter media trays - and if you're looking to achieve full cycle filtration (0 ammonia, 0 nitrite and 0 or close to 0 nitrate) that makes it suitable for tank sizes as follows: Normally stocked tropical community tank 600 litres / 158 US gallons Heavily stocked (e.g. cichlid / goldfish / predator) or marine tank 300 litres / 79 US gallons Remember, that is the recommended upper limit tank size for a FULL cycle - I've no doubt that it will keep ammonia and nitrite at 0 in much larger tanks but in this series of videos we work towards a full cycle, not half a job.
A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome ultimate does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.
This series of videos is all about trying to improve the filtering capacity of internal and external aquarium filters - If you have a filter you'd like me to feature in a video then please contact me on: [email protected] 07772848730 (Richard)
Anyone who sends a filter (UK only at present) will have it upgraded and returned to them for free and the only cost you will pay is how much it costs to ship it to me - I'm helping to boost your filter and the resulting videos will hopefully be useful to viewers all over the world so it's a win/win.
The following videos will be useful to anyone interested in learning more about filtration, bacteria and making the conditions for your fish as good as possible: Sizing a canister properly and filter set up: https://goo.gl/om19un Looking INSIDE different filter media: https://goo.gl/hZWS6c Bacteria and filter media: https://goo.gl/123gAF How to clean an aquarium: https://goo.gl/bPMhvh Aquarium tips / filtration playlist: https://goo.gl/pXgqVj
Check out my channel for hundreds of videos on a wide range of my hobbies - many of the videos have educational content so if you have enjoyed any give them the thumbs up and share.
This channel is purely a hobby for me so I will never ask viewers to donate money for any of my projects or charge anyone for information - information should be shared freely and I certainly don't consider myself an 'expert' in anything I pursue as a hobby so please do your own research, never accept anything as 'fact', reject anyone claiming to be some sort of authority or 'expert' and make your own minds up about anything you wish to study.
If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects. Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching. See you next time. Pondguru
Hello there everybody,
welcome back to another edition of Pimp My Filter and in this video
we're going to be taking a look at a filter
that I have been wanting to take a look at
for a good few weeks now.
This, my friends,
is the Ultramax 2000 from Aquael.
You may remember that I took a look at a one called
a UniMax 700 from Aquael a few weeks ago
and I was extremely impressed with that having never seen one
of Aqua-L's canister filters before.
That was a real beast. It took eight kilograms of BioHome Ultimate
and although the bit where the UV was meant to go
was a bit of a wasted space that could be filled
It was filled with mesh bags of media.
I really, really liked it. It was very, very good.
For this one they've done away with the idea of putting a UV in it,
which is a good move because
with the last one, the Unimax 700,
I would think maybe five to ten percent of the people who bought
that would ever put a UV in it, so that space was generally wasted.
I'm hoping that in this one
there is no wasted space, but let's take a look.
Actually before we take this out and get into it,
I'll just quickly run through a few facts
and figures directly from Aquael.
They say this filter is suitable
for tanks from 400 litres to 700 litres,
and in US gallons that is 106 to 185 US gallons.
The pump shifts a maximum of 2000 litres per hour,
which is 528 US gallons per hour.
Bear in mind that that is at zero head with no pipes attached
and no filter media in and no
foams in. So the actual flow is possibly going
to be somewhere near 1200 liters an hour maybe
what's that 200 and 250 to 300 gallons per hour.
I'm just guessing there as to the actual flow
because it does vary, you know some people
might have a filter set very low and a tank set very high,
depending on what you put in
it that can affect the flow as well,
so if something says it'll do 2000 litres an hour,
if you halve it then you're pretty safe,
it should pump more than half what it promises
to when it's actually all connected up,
but halving it is a good rule of thumb.
Anyhow, the entire volume of this filter,
that's basically how much water and media and everything is in it,
is 16 litres, which is approximately 4 US gallons.
Pre-filter, built into the cover.
I'll show you that in a minute.
That is an inspired move and I would love to see English
videos on this filter
because at the moment all I can find is either Russian ones or Polish
ones and if you've got any videos that you've put out
on your channel or you can find ones
that are in English,
please put the link to them in the comment section. They may get
marked as spam but I will pick them up at some point
and enable them to be visible.
Flexible filter configuration.
Allows users to install filtration media of any type.
That is really refreshing to see written on a box from a manufacturer
because most will say our media is the best, our foams are the best,
you need this, you need that, you need to replace this at this date
and then three months and six months and they don't do that.
They say look, this is our machine, you set it up how you want.
A few other things, basically there's also a double shut off valve
as well, so you can take one pipe out, so if you want to in-pipe out,
you basically just shut that off, take it out.
If you want to out-pipe out, you can just shut that off
and take that out. You don't have to remove both pipes together,
which is a nice degree of flexibility.
Right, enough of my nonsense.
Get this out of the box, pull it apart, show you how it works,
and see if there's anything we can do to make it more efficient.
Okay, let's start at the top and work our way down.
This is the innie. This is where the water goes into the filter.
That is where the water comes out of the filter. Each one of those are
individually controllable. It can be removed
separately. This is our primer. It comes out the top like this.
That's quite unusual because normally you have a button that you press.
When you're moving that in and out
you can actually feel the compression.
You might just be able to hear the little valve going as well. Listen.
There it goes, just near the end, like that.
That's a nice feature.
This, however, is the most interesting part of this filter,
certainly so far.
We've also got handles here, which are built in.
They, at first, seemed a little bit thin,
but the plastic is extremely strong.
It is a very good quality plastic,
so I've no qualms about that holding, no problem at all.
I mean, it's not even flexing, you know, it is solid.
Right, this bit.
Here's the innovative bit
because in here we've actually got a pre-filter that can be removed
without taking this filter apart
so that makes it very different to most other filters that
feature a pre-filter. So to get into that pop
pop that off and we pop that off and
at that point you're thinking well
that's going to break the seal around here
the water is going to start peeing out the sides but it doesn't.
Because we've got another clip on the inside here and here
and also on the other side and that keeps the main
head of this filter on but it does allow
this little flap to be lifted up and in here we've got
a pretty big pre-filter sponge
so basically what happens here is the water comes in at the bottom
just there it goes in through here through
a little floppy one-way valve up through the foam
And down.
Through the centre of our trays into the bottom
of the filter before rising back up through the
trays and out back to the tank.
So that is our pre-filter foam.
That is, I would say,
exactly the same quality foam as Oase use in their Biomaster filters.
It feels exactly the same.
Same, it's, it'd be way.
It is the same. I'm sure that's
from the same place as Oase get their foams from.
If you notice in the bottom of there,
we've got loads of little shaped fins.
And that allows the heavy muck to settle out,
it allows good distribution of water and because
this sponge is coarse it should go quite
a while before it needs cleaning out and yet it'll still
trap a lot
of the heavy muck.
So that's that, there you go.
Cleaning that out
is literally
just a two minute job which is really really good.
Okay so let's get the main lid off.
Okay, so remember where our pre-filter was on the top?
That's where the water comes down from the pre-filter
into here, and this pipe extends all the way down
to the bottom of the filter, and then water rises up
through all these foams and media.
So let's take a look.
That's our top tray.
That is basically a big, pretty coarse foam.
Next tray.
Is some ceramic rings that look almost exactly
the same as the Fluval ones.
They're a ceramic ring, they actually look pretty porous.
They're not bad.
Thank god.
Now in most filters I have a problem getting the trays put together.
In this one I've got a problem getting them apart.
That's it, let's get that out of here.
So in the next tray down we've got some medium
to coarse black foam.
And then the next tray down we've got some floss
that you can kind of pull apart and spread out in there.
You're kind of realising that this is set up totally arse-end round
and bottom tray we've got more floss.
So that's five good sized trays that fit into here.
In the bottom of there we haven't really got any space
to put any primary settlement but we've got
that pre-filter in the top of the unit
which is going to take care of the heavy muck so that isn't
a problem. Let's get this out the way and concentrate on the trays.
Rightio so these fit together very very well.
Which if you remember the last video
in this series was something that I was absolutely
raging about with that abomination that was the Eheim Pro 4+ 600.
That is a bloody awful filter.
Trays don't fit together, the fittings are crap.
This one is a million miles away from that
atrocity. But the way that this is currently set up
is just it's strange to say the least.
All the necessary parts are there for some degree of success,
but they're in a bit of a mixed up order.
I'll quickly run through what order it should be in if you wanted
to do nothing to upgrade the actual filter media in here.
If you just wanted to use what comes with the filter,
this is how I would advise you set it up.
I think what I'll do, I'll just strip everything out of the trays.
And then stack them up so you can get a good visual representation
of how the current setup should be ordered.
Right, even with what comes with this filter,
there will definitely be room for more filter media or more foams.
But this is how the order should really go.
You've got the very coarse foam in the top,
which is the pre-filter, which is straining out the heavy muck.
Then the water goes down the middle.
So here you've got your coarse to medium black sponge,
followed by a medium density blue sponge,
followed by your floss, that ensures that the water
is clear before it hits your ceramic media, and that's it.
If you wanted to put chemical media in,
like activated charcoal or carbon, that would go in the top tray,
so it's operating in the cleanest water.
There it will be most effective.
so this stuff is actually all going to be put to the side.
I wouldn't normally put everything out
of a filter to the side and replace it with new stuff
but in this case I'm going to because the
foams are very thick they don't need to be that thick.
We're going to go for a layered approach
in the bottom tray and then basically we're going
to follow that up with four trays of good
biological media. So I think I'll leave
that to the side just as a reminder of what comes with it.
And in the bottom tray, we're going to go for a coarse sponge,
followed by a medium density sponge, followed by a fine pad.
That lets you know that by the time the water gets above
that bottom tray, the water will be clean.
Just a quick note on the shape of these trays.
It makes it so much more easier
for cutting replacement foams if the trays are square.
I've upgraded some filters lately and
The trays have been all sorts of really awkward shapes.
This is really simple. Just cut a square,
round the corners off,
cut a hole in the middle and that's your foam. Very quick.
Right, so that's our coarse pad cut from a piece
of replacement pond sponge or pond foam.
That goes bumpy side down, so the water that's hitting it
is hitting the area where you've got
the most contact surface area, like so.
Please don't worry if you can't get bumpy foams
in your particular country,
it doesn't make a massive difference.
That one also is bumpy side down against the flat side
of the black one and what that does it creates voids
that will settle out real pockets of muck.
So again that's just purely to extend
the period of time between getting into this
thing and maintaining it. Now these trays aren't particularly deep,
So if you've got to go into the next tray
to continue on your mechanical filtration,
by all means do that. I think we're going to be okay here because
even just with a little bit of pressure, we can squash that down.
Just check. Yeah, we're okay there.
Let's manage to get it all in the bottom tray.
So that frees up four trays for filter media.
I'm going to fill it with the Biohome Ultimate.
Weigh it out, and then I'll get back to you and let you know
exactly how much we managed to fit into these four trays.
Now, Charlie, you've come to eat the foam again.
That is four trays of Biohome Ultimate Media.
Each one holds 1.5 kilos quite easily.
You would get a little bit more in maybe if you give it a bit
of a shake and battered it down or packed it in neatly.
So in total we've got
Three, six, we've got six kilos
of media in this filter.
There you go.
As you can see, that's just poured in loosely
and kind of shaken into place.
That's how I normally put media in filters.
You will get a little bit more in if it's neatly packed,
but it's often not worth doing.
For argument's sake, just say six kilos in this filter.
So let's get these trays dropped back into here.
I'll get the top put on and then I will give you
my thoughts on what we've done to increase the efficiency
and also my general thoughts on this
particular filter. Now while I'm dropping
these in I'm just thinking about these little lugs here.
See the little plastic lugs? Little handles?
They are a lot stronger than they were on that Eheim.
They're not perfect but they are made of a good plastic.
So you've got flex there without the risk of them snapping.
The benefit of having the little lugs on the side
as opposed to like a handle that flips up is
it doesn't take any space away from the media potential of each tray.
So I do like that idea.
This is a good quality plastic.
So you've got nothing to worry about with this particular design.
That's
heavy now.
That is very
heavy now.
Ha ha ha ha!
You see, that was full of good stuff.
There's really no comparison as to what comes with it
but they do say just set it up how you want.
That stuff that they add in there is really just a token gesture,
something to give you an idea
of the kind of stuff that could be put in the filter.
One thing I noticed when I was putting
this back together and I put this pump head back
on is that because the feed down through the center
of the trays is bang on in the center it doesn't matter
which way around you put this top so it can
So it can go any way.
That is a really nice touch and I don't know whether that's by design
or whether it was by accident
but it does make getting that top on much easier than it does
with some filters we've taken a look at
because quite often
when I've filled the filter back up with the trays I put the lid on
trying to clip it back down thinking why
the hell will it not clip back down properly and
I've got the head on wrong. Doesn't matter which way this one goes on.
That's nice to see.
Okay, as you can hopefully tell,
I really, really like this filter,
but I would love to see people putting comments in the comments section
who actually use one to indicate what the flow rate's like,
what the maintenance schedule's like,
how this pre-filter in the top works out for you,
because at the moment with being a very new filter,
information like that is so difficult to come by.
I can't run this because this isn't my filter.
This was sent to me by a guy called Richard,
who will be getting it back fully loaded with filter media.
So, those comments are so important.
If you've got one of these, please report back.
Tell us what it's like, the pros, the cons,
just basically how you're finding it.
The honest feedback on products is so important,
and that's where that comment section comes in.
So, this one, it's got six kilos of BioHome Ultimate.
That makes it suitable for a normally stocked tank.
Of approximately 600 litres, or 158 US gallons,
if we want to achieve a full cycle,
which is zero ammonia, zero nitrite, and very, very low nitrate.
So that's both the aerobic
and the anaerobic bacteria working hard to complete the cycle.
Now, if your tank is heavily stocked,
and that would be something like a cichlid tank,
like Malawi cichlids, or predator tank, or goldfish tank,
You could halve those figures, so in effect,
this filter would be suitable for a full cycle
on a heavily stocked tank of around 300 litres, or 79 US gallons.
Six kilos in here puts this in the same ballpark
as a Eheim 1200XL, or the XLT.
Which is also known as the Eheim 2075
or 2080.
Eheim have so many different names for their filters.
But a couple of weeks ago I did take a look at a 1200XL
and that was a good filter
but physically it was much more chunky than this one.
And it wasn't as well made. It was the Pro 3 series
which is when Eheim was still making reasonable quality filters.
God knows what the Pro 4 version of that's like.
If it's anything like the Pro 4 600 it'll be crap,
but this is a very well-made filter, it's very well designed,
it's got good features, it holds plenty of media.
I can't really say any negatives with it. Obviously I haven't run it
so I don't know what the actual flow rate's like.
Based on what I've seen, this would be a high recommend.
Please scroll through the comments,
see comments from people who are actual users of this filter,
before you make your mind up to buy it.
But just seeing what I've seen now,
I would say this is a million miles away from the new Eheims.
There, shh.
Stop going on about those Pro 4 series of Eheims.
Took a look at that 600 weeks and weeks ago
and I'm still peed off about it.
The crapness of it. This is a million miles away from that and that's
why this video is the next one
in the series after that Pro 4 because that
left an awful taste in the mouth.
Hopefully this one will be a nice palette cleanser
for people who've watched those two videos back to back.
This is a cracking filter.
Okay, if you're interested in this particular filter,
I will put links to it in the video description.
It is a very new filter,
so sellers of it aren't exactly plentiful, but you will find it.
I think there may be a US version as well, but I don't currently know
the make of that, or the name of that, or the model of that.
Most of these things are sold under different names and different
territories, but at the moment, all I have is the UK links.
Now as you may or may not know,
me getting time to answer comments is almost impossible
with all the other things that I've got going on.
So please help each other out in the comment section.
If you've liked this video, please share it,
give it the thumbs up, put it on forums, put
it on groups, wherever you want.
If you think somebody will benefit from seeing it,
please share it because that's what it's
all about.
It's about sharing information.
Thanks for watching.
See you next time.