The Filtosmart 300 is a bit of an enigma as it is essentially the old Eden canister filter with some Oase tweaks. As it comes set up from the manufacturer it has some serious flaws but can be made much more efficient with minimal effort as you will see in the video.
WHAT IS A FULL CYCLE? *If someone tells you the aquarium nitrogen cycle ends with the production of nitrate that is incorrect - please read on* A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome ultimate does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity - If you have a filter you'd like me to feature in a video then please contact me on: [email protected] 07772848730 (Richard)
Anyone who sends a filter (UK only at present) will have it upgraded and returned to them for free and the only cost you will pay is how much it costs to ship it to me - I'm helping to boost your filter and the resulting videos will hopefully be useful to viewers all over the world so it's a win/win.
The following videos will be useful to anyone interested in learning more about filtration, bacteria and making the conditions for your fish as good as possible: Sizing a canister properly and filter set up: https://goo.gl/om19un Looking INSIDE different filter media: https://goo.gl/hZWS6c Bacteria and filter media: https://goo.gl/123gAF How to clean an aquarium: https://goo.gl/bPMhvh Aquarium tips / filtration playlist: https://goo.gl/pXgqVj
This channel is purely a hobby for me so I will never ask viewers to donate money for any of my projects or charge anyone for information - information should be shared freely and I certainly don't consider myself an 'expert' in anything I pursue as a hobby so please do your own research, never accept anything as 'fact', reject anyone claiming to be some sort of authority or 'expert' and make your own minds up about anything you wish to study.
If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects. Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching. See you next time. Pondguru
Hello there, welcome back to another edition of Pimp My Filter,
and in this video, we're going to be taking
a look at another canister filter from Oase.
Now, if you've watched a few of these videos in the past,
you will probably remember that I took a look at a really good
canister filter from Oase that was called the BioMaster Thermo 600.
That one...
It wasn't without its shortcomings,
but with a few little tweaks it could be made into
a really good, really easy to maintain filter.
So I'm hoping that this one
from a different range will be equally as good.
This one is the Oase FiltoSmart 300.
This is the biggest one in this particular range of filters.
And I'll just give you a few facts and figures on this one.
There's three different filters in this range.
There's the 100, 200 and 300.
That relates to how many litres they are suitable to filter.
So if you've got a 100 litre tank, you'd buy the 100.
If you've got a 200, you'd buy the 200, 300 and 300.
That's pretty straightforward,
but they also have the ability to take a heater as well,
where the little primer thing is, you can slot a heater in there.
I'll show you that in a moment,
and again, the recommended heaters would be a 100, a 200, and a 300.
So everything's kind of
jive in there, but how much they'll actually filter
as far as a full cycle goes really
depends on how much media these filters fit in.
So in a moment, we're going to take a look inside it.
Okay, before we dive into this,
I'll just give you a little bit of background on this particular filter
because this was sent to me by a guy called Tony, who lives within
the grounds of Grace Wells of Fairham, which is a nursing home,
and this is actually to go on a tank in the nursing home,
so he sent it for me to upgrade and basically give it a bit of a kick.
Now in this letter Tony goes on to say that
He suggested to the nursing home that they put
a nice decent sized tank in the nursing home,
get a reasonable filter and just set up some sort of focal point
and also some point of interest for the residents as well.
So that's what they did and ultimately
he sent me this filter to pimp up.
He also goes on to say that he's pimped the filter that comes with the
tank, which was a dual, it doesn't say here, but it's either a dual...
180 or a 240, which I think is the medium dual,
the 3.0, and that one was based on the
instructions that I gave out in Pimp My Filter number 6,
which is a long way back, that feels
like an eternity back for me,
but it's always great when I hear people say, look, I've upgraded
the filter, I've just followed your instructions,
and things couldn't be better, because that
makes all this worthwhile, you know,
I don't want people falling over themselves to praise
It worries me because that's...
It's just ego feeding, you know, but when I get the occasional
letter from someone who says, look, I've upgraded this filter.
It's made a real difference. Thank you very much.
It's a good feeling because that's what this series is all about.
It's just about helping people, you know, and sharing information.
So hopefully Tony and the residents
of Gracewell's nursing home will be happy with what I've done.
I've told him to give us a ring when he gets it.
Open it up and then phone me
and I'll tell them exactly what I've done because it could be months
before I actually get this video alive
so you'll miss out on all the explanation before it's
actually set up. So let's take the top off this thing
and take a look at how it works or how the
manufacturer says it should work.
There's a difference between those two points. Okay so
we've got the filter made from pretty good materials.
It feels like nice plastic. The release clasps
Our good. There's a very good seal around here.
It's a very thick rubber seal.
It's almost like the ones you get in Fluval filters on top of here.
We've got a carrying handle, which is good.
And we've also got this little thing here, which allows you
to either fill it up with water or slot your heater down here.
But the big problem there is when you slot the heater down inside
of this chamber, it doesn't leave much room for media.
And because of the shape of this thing,
It's a funny shape to try and get a lot of media in here.
That's your in and your out. You basically just put
that on like that, twist it and that would
lock it in place. That's a really easy release mechanism.
So that's the top. Bottom has like a
base plate on. Ideally that could have done with bigger rubbers
because one of the things people
say about this is that it does vibrate a little bit.
It's pretty much sitting on hard plastic.
You could solve that problem by simply sitting it
on a bit of foam though, that's not a deal
breaker.
So let's get the top off,
we've got to get it almost like a headlock to be able to get
it off.
So that's our top, nice clasps,
it almost looks like some sort of spaceship, you know,
of Star Wars.
Anyway, that's where the water's sucked out,
that's where the water comes in.
I'll just tilt that up to give you a better look.
Okay, so water goes in here.
And I can see there's a dark mark here
which means that the inlet pipe is touching the top
of this foam. That's not immediately impeding the flow
but it is a problem. Ideally that wants
to be pouring into the void
and the foam wants to be taking all the muck. It doesn't just want
to be concentrated in a small area.
So water goes through the foam which is angled for a better
A little better contact surface area.
Then goes right to the bottom of the filter
and I'll show you down in the bottom there once we
get the rest of this stuff out.
Then it's meant to travel along the bottom and rise up through here
and up through this section equally.
I'll show you why it won't do that in a second.
Let's just get that out.
That's ultimately where the water's drawn out from.
You see that's a very
big foam. That takes up probably three quarters
of that big chamber in here.
Which it doesn't need to, because the intake pipe is less than half
the depth of that foam, so we will be altering that.
Then we've got a couple of bags of carbon,
and bear in mind the water's coming up here,
so it's hitting the carbon first before it gets to that second foam.
It's a funny situation.
This section, we've got ceramic rings,
which are actually very similar to Eheim mech,
a little bit bigger though, as far as a biological media goes there.
Useless, really useless.
As far as mechanical media goes,
as a primary settlement in a big filter, they'll be really useful.
But they're not useful in this filter.
So there's three bags of them, weighing approximately 1.5 kilos.
So here we've got kind of a strange three-part situation,
almost like a double figure of eight.
And it's separated by these long dividers.
And there's one in there. They're exactly the same.
So our water is expected to go down here which it would
because this seals off quite nicely once
the head's on. So it will go down there through the coarse foam.
It'll then hit another coarse foam
which is in the bottom.
See it only goes two thirds of the way along there.
So it would travel through that foam
and then it would either come up here or come up here.
It's meant to come up here and here,
flow around the top and then ultimately end up being drawn
out by the pump. The reason I say it'll be either
or is because water always finds the easiest route.
So if it's just come down there through coarse foam
and it hits another bit of coarse foam in
the bottom of here, it's just going to scoot straight up here
and get drawn out here. There's
going to be nothing coming through here.
Bear in mind that's where our supposed biological media was.
That's gonna be sitting in more or less static water
and that is a problem.
Just illustrate that with this.
So that's our divider.
So the water's coming down the first section through there,
right through a coarse foam, hitting that foam
and it's just gonna come straight up here.
That's the easiest route for it.
It's not gonna travel all the way through that foam
and then come up here through the media
and then over the top if the easiest route is here.
So that's how the water flows through there presently
and I'll show you what I'm going to do to make sure
it flows through as it's intended to do.
So we're going to scrap that as a biological media that is
useless. We're going to keep the first foam
that goes in that chamber, we're going to
keep the foam in the bottom in exactly
the same state as it's in, not cut it at all.
Put this big foam on the exit,
we're going to remove that and not use that at all.
I'm also going to chuck the carbon out
because I want maximum space in here for filter media and
this is the stuff that we're going to fit into here.
I'll just run through exactly what I'm
going to do first. I'm going to alter this because
as you can see that's where the water's hitting.
I'm just basically going to cut a little channel out
of here to ensure that the water
fills this space properly. It doesn't all hit that first.
Really all I need for that is just
Just a little sharp knife.
That's it. Now, when our pipe sits on there,
It's not gonna be restricted.
You're not just gonna have one small area
taking all the muck.
It's gonna go into here,
and this foam is now gonna be effective.
Big coarse foam just left in the bottom,
exactly how it was.
Then into the middle section,
I'm just gonna add a piece of medium density foam
that I've cut to size.
Very strange shape.
That goes in there.
Bumpy side down.
So now, even just by adding that,
The water will be less inclined just to fly up through here
because that medium foam has made more resistance.
So hopefully we should get some water coming up here.
But I'm going to add
that on top as well.
Now although our greatest area of draw is here,
there's more resistance there.
The water's got to come up through a coarse, a medium,
and a fine pad to get to this chamber.
So hopefully it's going to be forced to come up here.
Through the foam at the bottom,
up and then into here to be drawn out by the pump.
So now really we've done
as much mechanical filtration as we're going to do
in this first and second section. Now we need to add some media
and in each one of these mesh bags I've got 750 grams of bio gravel.
That is a porous gravel made from the same stuff as the bio home.
It's excellent stuff.
So this is going to make sure
that we get maximum surface area in the remaining space here.
So we'll start
with the middle section.
One bag in, two bags in.
So in here we've got 1.5 kilos
of filter media and if you remember
when this thing arrived we had three bags of filter media.
That was 1.5 kilos.
Already we've got 1.5 kilos in here but we're not finished there.
We've got another two bags.
Which will go down into the media section,
like that,
and that still gives us space here to put a carbon pad
or to add any chemical media,
or to stick another medium pad.
You don't have to put anything on here,
but you know, the option's there if you want to.
So I've gone with another medium pad
because we're not using the carbon,
that's already been used.
So that's it pretty much done,
but we still do have a space here.
Now I should have said before I started but I'll put
the links to all this stuff including the media and the bags
and the foams in the video description and also in the pinned comment
so check those out if you're interested in any of this gear.
That's what originally came.
That takes up a hell of a lot of space and it's a bit of a waste
because although foam is good at trapping muck and supporting
a reasonable amount of bacteria it's got nothing on proper.
Biological media you know the surface area in here
is hundreds of times more than it is on here.
So we want to try and get more in here
which we've done with the filter media and we're
going to add a smaller foam because we're kind of limited by that.
That's what fits on the pump head
that needs to go into something.
Ordinarily it would go into there. I've swapped that for a
For a smaller, finer sponge.
And that now goes into there.
Slots in there,
our pump head goes on and that's a pretty pimped filter.
So now the water drops in here,
it's not impeded by the top of this sponge as it once was.
That settles out a lot of the heavy muck.
It then goes into that big sponge,
big coarse sponge in the bottom and some of it rises
where it wants to be drawn up
but we've kind of slowed it down by the medium and fine pad
remember you don't have to put
a fine pad you'd probably get away with just the medium
then we've got filter media
then we've got that sponge on the outlet that we're kind of stuck with
so it either goes up there
or initially more likely it'll travel through that coarse sponge up
through the media it then goes out the top of here
and ultimately it will end up in this chamber
So even if we totally blocked that off down here
and forced all the water along from the first
section straight to the third section,
the water would all come up there, over there,
and it would end up in here.
So both of these chambers would have water flow through them.
That is very important
because the way it comes set up from the manufacturer, the water
finds the easiest route through coarse sponge,
coarse sponge, straight into coarse sponge.
It's just not going to go all the way along there
and up through the media, you know.
It's going to find the easiest route.
That has solved that flow problem.
And as I said, you don't have to go with a medium sponge there.
I've just stuck that on.
So the pump head goes on.
And if you're wondering what that little pipe is.
Going up here, that's just to draw any air in,
that's the pump inlet, so the pump's sucking
water in here, and if there's any air still stuck in here,
which there will be when you first set
this thing up, even if you totally fill that with water,
there'll still be a bubble of air in here,
as it draws the water up, it'll also draw air in,
it'll remove all the air from here,
and it should ensure that the pump runs silently.
You'll see that in a few different filters,
But not always.
So that goes on there.
Like that our filter is done.
I'll just quickly show you
that big length of foam.
Obviously it was a little bit longer than that.
I think it was 60 centimetres which is two feet.
I bought that on eBay.
That is really handy for cutting for situations like this where
you've got a pump intake that you need protecting.
Strictly speaking, it doesn't need that in here, you could just fill it
with media in bags, take that little intake pipe off
and your pump would suck quite easily through there,
but obviously you've got that little spike coming out the bottom
of the pump, you'd need to cut that off, it's a bit of a fanny on,
it's best just to leave that intake on, put a different foam
on or simply cut that one through the middle, you know
if you've got an existing foam, you don't want to buy more foam.
Just cut that through the middle
and fill it with media underneath there.
So now we've ensured that the water flows through this thing properly,
we've ensured that it's got a reasonable amount
of foams in from coarse to fine,
so should have really really clear water.
It's got enough space for chemical media
if you wanted to put that on top of that section.
And it's also got twice as much weight of biological media in there.
So we've gone from 1.5 kilos to 3 kilos
of really good porous media.
So, three kilos of media is £6.6 for you guys in the US.
Yes.
Um.
If you tweaked it a little bit, you might
get a little bit more in than that.
But I use the bio gravel in the bags
because the bags are really easy to take out
and just give a shake in water you've drained
from the tank when you want to clean it.
it.
Um,
I did fill bags with the BioHome Ultimate,
but they didn't fit in there as well at all.
The bio gravel just kind of flops into place.
It's a really useful media.
So 3 kilos or 6.6 pounds is quite a lot of media
and that puts this thing on par as far
as how much media it holds with a Fluval 406 or 407,
an All Pond Solutions 1400 EF or the equivalent SunSun
which is the 303, SunSun 303, that'll also hold 3 kilos
if you use the bottom tray and that for your foams.
As well as a load of other different types
of filters that also hold a similar amount.
They're probably the two you'll know best,
the Fluval one and the All Pond Solutions or the SunSun one.
So this is a quite an unusually designed filter
and the way it came up, as I said before,
I couldn't say that it would be very efficient.
So hopefully those changes that we've made here will improve
the efficiency greatly. I mean
Just adding three kilos of media instead
of that ceramic crap that came with it,
that will make a hell of a difference.
So that will enable this filter to be suitable
for a full cycle, which is the reduction of ammonia,
nitrite and nitrate using that media.
For a tank of around 300 litres, which is about 79 US gallons,
that's a normally stocked tropical tank.
If you've got a goldfish tank, or a predator tank,
or a Malawi tank, a discus tank,
something that would be more heavily stocked, more heavily fed,
and producing more waste, you could halve that.
Down to about 150 litres if you wanted to see the full cycle.
And in US gallons that would be roughly 39 to 40 US gallons.
So it will serve us a reasonable sized tank.
And I think you guys in the US can actually get these.
I know they're available all throughout Europe.
Possibly in Australia.
And I know there are...
Biomaster range is available in the US
because I've seen you guys making videos on them.
Because this is also an Owasa product I
would assume you can get these as well.
So I'll put any relevant links in the video description
if you want to check them out.
They would be classed as a budget filter as far as Owasa products go,
but with those few changes to make sure
that the water flows the right way...
I can see this being pretty effective,
so it's a one as far as the construction
and the layout now is concerned that I would recommend.
Now I hardly get to see any comments now
because YouTube just doesn't send me notifications,
I've got everything ticked and the comments just don't seem
to come through which means I've got to go looking for them.
Quite often I don't have the time to go searching for comments,
so if you want to get me, my
contact details are in the video description and the pinned comment.
It's best to phone because I get a nation of emails,
sometimes I can't get to them.
And if there's a million questions in an email,
I simply don't have the time to answer them.
But if you want to phone,
you can ask me as many questions as you want and I'll answer
them all, providing I know the answers to them,
I'll answer them all whilst you're on
the phone.
So, as always, thank you very much for watching,
if you've liked this video please share it
online anywhere, on forums, Facebook pages,
send people links if they've got this particular
filter or you've heard somebody talking about it,
and you want to see how one could be set
up, obviously you don't have to set it up this way,
this is just a suggestion, yeah,
let me know what you think, and share to your heart's content.
This is probably number...
I don't know, 30-odd in this long series of videos,
so go onto the channel, check out the playlist of all the other videos
that I've done, if there's anything that takes your fancy
and you want to know more about a particular filter,
the chances are the video is either there or it will be coming,
because I've got about 30-odd videos shot to edit for this series,
and I just can't get time to edit them, so I will be trickling
videos out over the next few months, this is going to be a...
A big series, you know, and hopefully it'll help a lot of people
which is what it's all about. So please share. Thanks for watching
See you next time