The C2 is a decent HOB filter which has a good rear cartridge which would normally be filled with a coarse and a fine pad. Like most HOB filters the available space for filter media is minimal. However, if you have room for a HOB filter I'd advise on going for this one: https://geni.us/Q4AI37t as it is easily the best HOB filter I've featured in this series.
A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome filter media does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US Gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Remember to use a water conditioner which does not bind / detoxify ammonia, nitrite or nitrate as that type of conditioner will severely limit bacteria numbers by starving the bacteria of 'food'. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.....you'll spend less money on treatments too......basically the filter is the foundation of a successful aquarium.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity - If you have a filter you'd like me to feature in a video then please contact me on: [email protected] 07772848730 (Richard) Anyone who sends a filter (UK only at present) will have it upgraded and returned to them for free and the only cost you will pay is how much it costs to ship it to me - I'm helping to boost your filter and the resulting videos will hopefully be useful to viewers all over the world so it's a win/win.
This channel is purely a hobby for me so I will never ask viewers to donate money for any of my projects or charge anyone for information - information should be shared freely and I certainly don't consider myself an 'expert' in anything I pursue as a hobby so please do your own research, never accept anything as 'fact', reject anyone claiming to be some sort of authority or 'expert' and make your own minds up about anything you wish to study.
Check out the playlists on my channel for hundreds more - on a variety of subjects.
Some of the links above may be to my affiliate programs on Amazon and Ebay so they will throw a few pennies my way if you make a purchase - it costs you nothing extra and helps towards keeping the lights on in my bunker.
Hello there, welcome back.
In this video we're going to be taking a look at this fella. It is
the Fluval C2 hang on the back filter.
A big thank you to Matthew for sending me this.
And I've got to give him some sort of props
because it's got more super glue on than I have ever seen on a filter.
At some point, this must have been absolutely smashed to bits,
but he's managed to put it back together.
Unfortunately, it hasn't got all the stuff in it
that would normally come with this particular filter.
But I'll link to a Fluval C2 video in the video description,
which will show you how it normally comes set up.
I hope in this video.
I'm basically just going to run through how I would set it up
and it is really, really easy.
Now apparently Matthew is going to be using this on a 30 litre tank
and 30 litres is nearly 8 gallons for you guys in the US.
Now before I get into the simple setup that I'm going to show you guys,
I'll just kind of...
Express the point again, that a lot of these hang-on-the-back filters
and internal filters are designed for after-sales,
so the initial price may not be very high,
but by the time you've bought cartridges and specific size foams
and little additives and all sorts of stuff to go in them,
month on month on month on month, they end up costing you a fortune.
So, swapping them to something much cheaper...
is a good idea because
then you've got a cheap filter at the initial point of purchase
and really apart from the odd foam and pad
in these various filters you don't really need to replace anything
so going forward you've got a much cheaper option
with what I'm going to show you now.
So the operation of this is just like
every other hang on the back filter.
Water's sucked up, it goes down into a pump, the pump pumps it back up
Then goes through foams or pads,
then through some media, and back out to the tank.
The flow can be adjusted by moving that,
although to be honest, I don't think that'll adjust it much.
Looking at where the pump intake is,
it doesn't seem to really shut it off much.
I can't see... God, unless there's a part missing.
It could be a part missing.
And as I say, this did come in a pretty broken down sort of state.
Let's get the top off and have a look.
So here we've got...
Various cartridges where things go in,
and on the back, we've got another cartridge.
We are going to keep this one and reuse it.
And in here, because the water comes through here,
and kind of through the back of it, and comes out the front,
we're going to put a piece of medium-density foam.
Ideally, I'd like to go coarse, medium, fine.
In a filter like this, there just isn't space for that.
So, we're just going to put that in there.
Like so and there's handy little fins inside
of here to hold the foam in.
So now water comes through here.
What's the matter? What?
So now the water comes in from the pump
and because you've got all these bumps here,
the water should flow all the way around the back of this foam
before it goes through into our next section.
So there's our pump down there, that's the outlet for the pump.
That goes in there
and that really completes the mechanical side of things.
As I said there's not much space, see how much space we've got left.
If we use these things and try
and put media in there we can't get much in at all, it just
complicates matters. So what I'm going to put
into here is two small mesh bags of biogravel
and in each one of these bags there's 200 grams
so in total there'll be 400 grams which in pounds
There's 0.88 pounds of media in here.
That smell nice?
Yeah, what do you reckon?
Yeah.
Now I sell these bags on the Filter Pro site.
If you buy them when they are full of media,
there's normally 300 grams in each bag.
That is a little bit too fat to fit into here.
200 grams
is about right.
One,
that's
it.
That's as complicated as this particular filter needs to be.
See from the back there, the water's going
to swirl all the way around in the back of here.
Because you've got all that surface area there,
you're going to get good settlement in the back.
It then goes through that, into the filter media,
back out and back into your tank.
Very, very simple.
There you go.
That is so simple.
You know, that just saves you farting around,
buying specific cartridges and all that for month in, month out.
With that, the media will last indefinitely.
The sponge, you probably get a good year out of it,
so the ongoing costs of this particular filter
are very, very low. Let's see how many watts it is.
Five watts, so that's not going to cost you much
at all to run or maintain this filter.
So because we've got 400 grams in,
that makes this filter suitable for a tank of roughly 40 litres
or 10.5 US gallons.
That's good because Matthew's going to be using it on a 30 litre tank,
so if anything it's a little
bit over the top. As you know you can't go over
the top with the filtration, it's always best to
have a little bit too much than not enough.
Now the use of media in bags like that does allow
most of the water just to go around the sides of the bag,
but because the water flow
through the pieces of media
and also through the spaces between the pieces of media inside the bag
is really really slow you tend to get a like
a little bit extra boost as far as the anaerobic
side of things go you'll see similar systems set
up called PCB, anoxic filtration or something
else as well i can't remember there's
a there's numerous different names for that sort of thing
And I will say, all of those methods work, but the better
quality media you can have in there, the better it works.
So the bio-gravel, because it's made of grains of sand, which is, you
know, when they're all stuck together with little tunnels between them,
each piece of media has a massive surface area.
So,
In a small situation like this,
using a media like the bio gravel is absolutely perfect.
If you can't get that, you can use pumice,
you can use the mineral cat litter, which is pumice.
You can even use the gravel in the bags
because it's better than nothing, certainly better than
plastic media.
Ceramic rings are a little bit too big unless you get the old style
God, what's it called? Eheim mech, which is really tiny ceramic rings.
They would work pretty well in the mesh bags,
and they would also allow it to be quite floppy,
so it would fit into that small situation.
Obviously, to me, the bio-gravels are best, because you get
the most amount of surface area into the smallest space.
Now obviously I have showed the bio gravel
because that to me is by far the best thing
to put into small filters
because it is made of sand and powdered glass which
sticks it together as well as a few trace elements
and so on. It's really
Well structured as far as the internal structure goes
and the material it's made from is very receptive to bacteria
so it colonizes exceptionally fast, supports aerobic
and anaerobic bacteria for your ammonia nitrite and nitrate reduction
It allows you to get maximum surface area into minimal space
And that's exactly what you're after
when you're dealing with such small filters.
Thanks again to Matthew for sending me this.
Check out the link with the Fluval video
showing you what normally comes in this particular filter.
And I'll see you next time.
Thanks for watching.