Interpet PF filter range: https://geni.us/EK5Kod At the time of making this video the filter was on offer at £21.95 with free delivery - that is a great deal and even if you don't need a new filter this will make a great back-up for your existing system. Filter Kits, Foams, Biohome, Biogravel etc: http://www.filterpro.co.uk (FilterPro site has links to Biohome suppliers in other countries) Eheim Mech: https://geni.us/lXrB7 (useful for under trays in filters which work bottom to top) Eheim Substrat Pro: https://geni.us/98euQaB (decent alternative to Biogravel). This is a well made filter which has a decent amount of space inside and even if you choose not to upgrade the filter it is great value. *Avoid using water conditioners which claim to bind / remove / detoxify ammonia, nitrite and nitrate as it will have a pronounced starving effect on the bacteria. When bacteria is starved the population will be low as it grows in line with the available 'food'. A normal conditioner will allow the bacteria to fully populate the whole system and take away the 'need' to add more bacteria after maintenance / water change. Most people get conned into regularly using bacteria additives and that is simply to mask the side effects from a damaging conditioner and a failing filter. A normal conditioner like Tapsafe, Aquasafe, API Stress Coat etc. is all you need when a tank is properly set up, a filter is suitably sized (and properly set up) and Nature is allowed to so what Nature does.*
See below for notes on how much media is recommended for different stocking scenarios. The Q&A page of the FilterPro site has extensive notes on recommended treatments and how filtration works.
Don't "eat ze bugs" - grow your own food and create a new system ....... you can check out my efforts to create a new system to navigate Agenda 2030 on my Thousand Yard Stare channel: https://www.youtube.com/channel/UC1pgJBGQrUfCUAhk63U5u5A
A full cycle is completed by bacteria - the aerobic part of biological filtration which processes ammonia to nitrite and nitrite to nitrate followed by an anaerobic part which processes nitrate into soluble nitrogen which bubbles off to the atmosphere. Therefore it requires a suitable amount of excellent quality filter media to be able to provide the environment for both aerobic AND anaerobic bacteria - that is what Biohome filter media does perfectly but even with such good media there are limitations and we recommend the following amounts for different stocking scenarios: (1 US Gallon = 3.8 litres) (1kg = 2.2 lbs) Average community tropical aquarium = 1kg per 100 litres Average coldwater aquarium = 1kg - 1.5kg per 100 litres Predator aquarium = 1.5kg - 2kg per 100 litres Large cichlid aquarium = 1.5kg - 2kg per 100 litres Malawi / Tanganyikan aquarium = 1.5kg - 2kg per 100 litres Marine aquarium = 1.5kg - 2kg per 100 litres Average mixed fish pond = 1kg per 200 litres Average koi pond = 1kg per 150 litres
You may be disagreeing with the above figures but remember that they are for a FULL CYCLE not half a job - achieving 0 ammonia and 0 nitrite is quite easy since aerobic bacteria grows freely on any surface but the anaerobic bacteria responsible for COMPLETING the cycle needs more a specialized habitat. Remember to use a water conditioner which does not bind / detoxify ammonia, nitrite or nitrate as that type of conditioner will severely limit bacteria numbers by starving the bacteria of 'food'. Size a filter properly, set it up sensibly and you will have perfect water - it's that simple....and your filter won't be the dreaded 'Nitrate factory'.....you'll spend less money on treatments too......basically the filter is the foundation of a successful aquarium.
This series of videos is all about trying to squeeze more efficiency out of internal and external aquarium filters which generally have a limited filtering capacity
Some of the links above may be to my affiliate programs on Amazon and Ebay so they will throw a few pennies my way if you make a purchase - it costs you nothing extra and helps towards keeping the lights on in my bunker.
Hello there, welcome back to another edition of Pimp My Filter.
Yep, it's very cold in here.
I just noticed on the viewfinder that I can see my breath.
I'm starting to breathe.
We're in the middle of winter,
but I'm feeling okay because I've got a nice warm jacket on.
Christmas present to myself. Oh, happy new year by the way.
Okay, so in this video we're going
to be taking a look at this fella,
I was going to say IF, but it's PF2.
Now, there's four filters in this range, which range from 1 to 4,
which is the Interpet.
and this one is suitable for tanks up to 81 litres,
which, when you see the size of it,
you'll think is a little bit pessimistic
compared to what most manufacturers promise.
I don't know, they just seem to be quite a very honest,
good-quality company.
They're not one of the big boys,
but you'll see from this filter that it's pretty decent.
So let's take a look.
Okay, so that's the filter there.
P.F.
PF2.
If you're interested in this, I'll put a link in the video description
and also in the pinned comment.
So the water's drawn in through the front.
It then goes up through a one-way valve, which is pretty important.
Because when you come to clean this fella out,
you just remove it from the cradle and lift it out.
And all the water doesn't then just drain out the bottom.
With standard internal filters,
you tend to find that when you lift them out,
Just the act of lifting them out dislodges a lot of the very fine
muck that's stuck in the foams
and so on and a lot of it comes back into the tank.
So it goes in the front, from the bottom, through a series of pads
and then through some filter media. There's a little air intake
on the top here, so we've got on and off,
that's on, air gets sucked in as the water's
being blasted out of here, so it mixes it in,
it's a venturi sort of effect.
That's good because there's no pipes
or any sort of fiddly valves or anything it's all just built
into the top this would normally operate
with a water level just below that so that's our outlet
it's got adjustable flow you'll see how that works in a moment
and then it's got an end on here which
can be twisted up and around to fire either way up in the air
or down probably best if you fire
it down then it gives the air bubbles a chance
to rise up quite a long way but that's up to you and
And I'll just take that off.
In case I end up breaking it when I pull this thing apart.
We'll get it out of the cradle.
Oh, incidentally, it's got very good suckers on the back of there.
Often with internal filters, you get really weak suckers.
And because of the weight of this thing,
and truly because of the weight it's going to become when I pimp it up,
you want good suckers on there.
Otherwise, this is just going to slide down the tank.
So it's got quite a standard release mechanism
for taking this bottom part off.
See, we've got a little hole there.
And a hole here, which has got a barbed fitting.
These parts press in to release the barb,
and that allows us to take the top off,
like so.
So that's one section.
That's our other section,
and that is full of ceramic media.
This little cage, which can be taken off.
Not sure whether this can actually be disassembled
to put anything else in because I would quite
like to see carbon in there or even a carbon pad
or something as the last stage of filtration.
So we'll investigate that later.
That is our flow regulator.
It basically regulates how much water is drawn in by the pump
and therefore how much can
be spat out by the pump.
Finished with the head now.
We don't need that.
I think we'll move to this bottom part. I'll just take this off.
That's like our grill that goes on the front just
to strain out any heavy muck and stop fish
getting sucked in. In there we've got our one-way valve.
I should be able to show you how it goes.
So that allows water through but it doesn't allow it back out.
If I just take that off you'll see
that the water can then get into where
this cartridge is inside of here. Before I show you
the cartridge removed I'll just explain that that is where
the water comes up and out and if I take
I'm going to take the cartridge out.
Flip it over you'll notice that it's drawn in here
so effectively the water comes in this side
through the coarse foam it then goes through
some carbon pad through a fine pad and then out
through this through the biological media
which basically just sits on top and then gets pumped
back to the tank so the water has to travel quite
a long way in that short space to show you the
That's our course one.
That's where the water goes through,
and then on the other side, carbon pad and our fine pad.
So by the time the water leaves this section,
it will be clean just before it hits the biological media.
So as far as where the pad is and where the media is,
that is in the correct order.
Ideally, I would like to see the system go mechanical,
biological, then chemical.
So whilst off the shelf, this is a pretty good setup,
you know, as far as internal filters go.
I think we can do significantly better with this,
pretty much just by discarding this
whole thing and swapping the filter media in here for some carbon.
I was going to reuse this foam perhaps.
In the bottom of here, but I think I would like
to send everything back intact to Anthony who sent me this.
Oh, actually, I never thanked him.
Thank you very much, Anthony, for sending me this.
Much appreciated, because I've wanted
to have a look at one of these for a while.
And it's a pretty good filter.
Right, so that can get put to one side.
This will hopefully come apart.
I don't want to break it, so I think I'll try pushing
the media here and try to pop that out.
I don't want to break this thing before I send it back.
I think by trying to dig it out this way it might break it,
but if I can push the media
here it might just pop this bottom of the grill out.
We shall see.
Popped
it out.
That is our biological media.
That's actually not a bad amount.
I thought there'd be less than that, because that just seems tiny.
You wouldn't think all that would fit in there,
but it was laid in very neatly.
Oh yeah, and I think carbon.
...might actually go through there into the pump,
especially the pelletised stuff.
So I'm gonna have a look around for a carbon pad and put that in there.
Of course you don't have to put carbon in this top bit,
you can put more bio-media if you want.
Carbon isn't essential, it's really just put into filters to...
Drawing smells to soak up any residual treatments
and also a lot of manufacturers put it in the
likes of canister filters just to mask the fact
that the filter isn't doing a good job.
If you've got a filter that's properly set up
and correctly sized for your tank and stock you won't
get any smells because you not have the ammonia nitrite and nitrate.
Everything will be processed.
So carbon really is an option
that you would just add in as and when you need it.
For example if you just treat
the fish you know after seven to ten days or whatever
put a bit of carbon in the filter draw in any residual treatment
and then your water is kind
of back to square one and good to go again.
Or if you've got the likes of bog wood in the tank
that's staining the water
a little bit too much you can put carbon in it'll draw that
colour in and then after seven
or eight weeks I would suggest chucking that carbon away.
Seeing if the problem of the coloured water persists.
If it doesn't then don't bother adding
more carbon in. If it does
then add carbon in until that problem ceases to be a problem.
So we're just going to cut a little bit
of carbon pad for this top section.
Just roughly because it'll squash in.
That's a little bit bigger
than the aperture on there but it'll squash in perfectly. Look at that.
And because it's a pretty coarse impregnated sponge
the water will get through there easily
because before that you're going to have at least a pad
or two and your fine pad.
So that's our last section put back in place there.
That's the chemical so we're going to go mechanical,
biological, chemical.
Don't have to go chemical though
as I said before you can add more biological in here if you want to.
Or, if you wanted to add more tannins into the water,
you know, make it more suitable
for the likes of South American fish,
you could actually fill this up with alder cones.
Alder cones are really potent,
and you could get quite a few in there, so as the water's
being drawn,
it'll release all of that goodness into the water for your fish.
So that's looking down inside of the main body.
As you can see the water comes in the bottom
and it basically just flows up the inside of there and
looking at that makes me you know doubly sure
that we don't need this internal cartridge.
We can just run this as a simple bottom up filter.
What am I going to go with? Yeah I better go with
a coarse. So I'll go with a coarse pad in there.
If I can get a medium in maybe medium or I might
just jump straight to fine
and then I think I'll just go with a bag of media in here and we should
We should get quite a lot in there.
Okay so I've managed to find a coarse pad that's
not quite as coarse as the majority of the ones
that I sell. So it's somewhere between a coarse
and a medium that's going to be perfect. So I'm
going to put that bumpy side down into the bottom of here
and then over the top of there I'm going
to put a reasonably bouncy fine pad.
So really we're just going straight from medium slash coarse
And that'll be no bother at all in there.
We've got a reasonable thickness
of foam to catch the muck.
Far off, difficult to see
but that is in the bottom there,
fits beautifully.
But again this wants
to be just slightly bigger than this opening
so that none of the water just flies up
the side because if it does we've
kind of defeated the object of putting a fine pad in because
its job is to catch the fine muck before it hits the filter media.
That's our
fine pad in.
Now I will not lie, it's going to be a lot easier to take this
manufacturer's cartridge out of here than it
is to get these foams out again
but when they're wet all you've got
to do is just tip them upside down and
they'll just fly out because they'll
be heavy with muck so just bear that in
mind. Right, gonna fill a little mesh bag with some bio gravel
and we'll see how
much we can get in there.
Okay just for reference there was 45 grams of media
which came out of that top section
in the little cartridge at the top there
Of course we replaced that media with a carbon pad
and in our main section above the coarse
and fine pad I've managed to fit a little bag of bio gravel in there
and there's approximately
180 grams.
Now you could probably get up to 200 grams of media in there
but when you put the top
on it would squash it down a little bit too much.
So, this is...
You know, it's a sensible amount to put in there as you can see
when I put the top on,
remember which way the top went on. There we go,
it's not squashed down but it is packed out
and that is our filter complete.
So now we've got the mechanical side of things being the screen on
the front, coarse pad, fine pad,
that is our water all done clean in the bottom section, then we've got
A bag of biological media which in this case is the bio gravel
but of course you can use anything
you want and then in the top just before the water leaves
the filter we've got the carbon pad so we've
got mechanical, biological,
chemical all in one neat filter.
So the Interpet PF2, very well made filter.
It holds a reasonable amount of media,
very easy to upgrade if you wanted to do these sort of changes.
Even if you didn't want to do these changes
then it's still got quite a lot about it
and I think it's just a pretty good,
well a very good quality, good value filter as
all of the Interpet stuff is.
Interpet also do a good range of treatments as well.
So I would recommend their treatments as well as their filters.
This is the PF range but there's also filters called CF as well.
And I think I've made at least one Pimp My Filter video on one of those.
I think it was a CF3.
And that's like a hang on the back filter that actually hangs
inside the tank. The water comes in like a little waterfall.
Again, that is a really,
really easy one to upgrade if you wanted
to. And they're just good value,
So I'm going to get this back off to Anthony now.
I think I'll put a bit of extra media and foams in as well
good quality filters.
because I took quite a while between him sending me this
and me making the video.
So I'll put a bit extra stuff in his box
as an apology for getting it back to him late.
So I am sorry, Anthony.
It doesn't normally take me this long.
But I've had a project that I've been doing
over the Christmas holidays.
Which is pretty awesome, nothing related to aquatics,
it's actually something in my garden.
If you are interested,
you can check the video on that out on my Thousand Yard Stair channel.
That's my other channel where I kind of go
into like self-sufficiency gardening,
outdoors, bushcrafty sort of stuff.
I'll put the link in the video description.
Oh man, I haven't even told you what size
tank I would recommend this for, I'm just
Just slavering away.
Well, we've only got...
Roughly 200 grams of media in,
so I think for the recommended size of maximum tank,
80 litres, yeah, we're not probably going to get a full cycle on there.
But if you weren't bothered about bringing
the nitrate all the way down to zero
and achieving a full cycle, which, to be honest,
you could really only do with a bigger filter,
possibly an external filter on a tank that size, then...
Yeah, 80 litres, easily, you know, probably is a bit more.
I still think 80 litre tank for a filter
of that size is a little bit pessimistic,
unless you've got a reasonably heavy stock.
You'd probably get away with this on a 100 litre tank.
If the stock was reasonably light and it was well planted,
you know, a well laid out tank,
it's a decent sized filter.
It holds a respectable amount of media.
It's got good features, like the little air intake,
which I haven't seen one like that before, and I do appreciate that.
There's nothing worse than when you get the little bit
of pipe that comes out the top and it keeps falling off,
it goes brittle and it won't squash on properly.
Or you get ones with little spigot-type things that push in the top,
that always seem to fall out and get lost.
There's nothing here to get lost.
Good filter, good price, thanks for watching,
and I shall see you in the next video.