These are new foams I've had specially made to my specifications and they can be found on my website: http://www.filterpro.co.uk (foams page). Dimensions are 17" x 11" x 2" (432mm x 280mm x 50mm) and they have a very deep profile of approx. 1.5" (38mm) - I may have got the height of profile wrong in the video caption (I think it says 32mm). I also have the foams listed on ebay - just search for 'mega foams' or the seller 'Filter Man UK' and they will come up. Failing that search for 'Biohome Ultimate' and my listings will come up. Please note: these are not acoustic or furniture foams - they are aquatic foams which are not treated with a flame retardant. A chemical flame retardant will do your aquatic system no good. Ebay will add some crazy taxes and high international shipping prices if you're outside the UK which is why I always advise buying directly through the FilterPro site if you are not in the UK. Check out this post from my 'community' page on my YouTube channel - it has some excellent reports about how well the Biohome works towards a full cycle: https://www.youtube.com/channel/UCMK3tSLPaPHQH-wCm-e2Z8Q/community?lb=UgkxFdgRRt6GxA1o3ffDzsF5dbOaB5xAuoFX What makes this extra special is that I didn't ask for people using Biohome to post their reports in the comment section, they just did - and that is really awesome since I have an advertising budget of £0 and will never pay for 'reviews' or any sort of promotion online. Thanks to everyone who posted there and feel free to share that post to anyone wondering if Biohome works. It does. RECOMMENDED PRODUCTS ON AMAZON: https://goo.gl/jMaBWy INSTAGRAM: https://www.instagram.com/pondguru_outdoors/ FILMING EQUIPMENT:
Panasonic HC-VX870 HD camcorder http://geni.us/3UwE +Rode stereo microphone: http://geni.us/4OL +Rode 'deadcat' mic cover: http://geni.us/1pmn JVC Everio quad proof HD camcorder: http://geni.us/e09e +Rode 'deadcat' mic cover (opened up and held between tripod and camera base) http://geni.us/dee24 Zomei Z666 tripod: http://geni.us/1a1af3 Manfrotto MTPIXI-B PIXI mini tripod: http://geni.us/87f7 If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects.
Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching.
See you next time.
Pondguru
AI Generated·May contain errors
Hi there, welcome back. This is just a quick video
to show you some new foams that I've had
specially made for sale on the FilterPro website.
That's them there. I call them mega foams.
That's the old ones
which have a really good deep profile in and that's the new ones.
Look how deep that profile is.
Now these new foams are twice as thick as the standard foams.
They don't cost twice as much,
which is a good thing.
I can just imagine those in a shower filter,
in a big canister filter that works top to bottom.
You've got a ridiculous amount of contact surface area there.
It's approximately 50-60% more than ordinary foams,
so that's going to trap a heck of a lot more muck before
the foams get clogged and need cleaning out.
Also just imagine that in the likes
of a traditional canister filter like an old
school style thing from Eheim,
the classic range that work bottom to top and generally
are just an empty bucket.
Stick these lads in and you've got strong enough foams to support media
being put straight on top of them without them being crushed.
And also you've got the benefit
of that ridiculous surface area to trap the muck as well.
So basically your filters are going
to go longer before they need to be cleaned out.
Now I've got these on the website in either single,
coarse, single medium, coarse and medium,
or a set of three where you get the coarse, medium and fine.
And just in case anybody is concerned about these foams,
because generally foams with this sort
of profile are specific to acoustic foams,
Which would be treated with a flame retardant for indoor use.
These are proper aquatic foams not treated
with any sort of flame retardant.
So they will not poison your fish.
And I've also got them online pre-cut
into little strips.
And those strips fit perfectly inside of the FX4,
5 and 6 filters.
I suppose if you trimmed them down, they would possibly fit in the FX2,
but I haven't measured one of those ones yet, so I don't know.
And again, they're available in single, medium, single course,
pack of four, or pack of six in either medium or course.
Now, the size of these foams is 17 inches
by 11 inches by approximately two inches thick.
And the distance from the peak
and the trough is approximately an inch and a half.
So that is a I mean that's I don't know it's the Himalayas.
It's already set up in the way that I
would have previously recommended and in fact I still do recommend.
So you've got a coarse pad
followed by a medium pad
so when the water comes through it gets graded out.
Obviously you've got a flat surface there.
Just as you have with the standard fluval pads.
So, you know, you've got a limited amount of
surface area but that can be improved
with these new foams as I'll show you in a minute.
Then you've got your fine pad on the top
and then your media in all the trays.
And it's probably worth saying
that I've now got these coarse and medium pads
for use around the outside of here,
pre-cut and also available on the website.
You can see the amount of surface area that these lads have got.
So the water is going to come
through the sides of the trays
and it's going to be met with all these lumps and bumps which is
going to slow the flow down and settle out the muck really well.
That's what you would normally
have. See it's quite a difference in surface area.
Yeah there you go that's the foams in now
and what you've basically created there is a much greater surface area.
for muck to settle out on instead of the water just flying around
and around and around here
as it's being constantly fed in from the tank it's going
to settle here you're going to get
little backwash zones you're going to get you know all sorts
of settlement going on here so that
This is another option for your FX4, 5 and 6 filters.
Megaphones.
And actually, it's interesting in the FX2 to see
that Fluval have actually used not a bumpy foam,
but like a grooved foam in that new filter,
because obviously that improves the surface area.
To be honest, these are probably too big for a normal canister filter,
but certainly for big canister filters, shower filters,
sumps, you know, coarse, medium, then into your fine,
it's going to do a cracking job, it's
hardly ever going to need cleaning out.
You know for bigger situations
these are probably worthy of consideration
and as I say I've had these specially made so you're not going to get
things this size anywhere else.
Thanks for watching, I'll see you next time.