Fluval FX2 (Amazon): https://geni.us/skvs7 Filter media, filter kits and foams: http://www.filterpro.co.uk Eheim Substrat Pro: https://geni.us/98euQaB The FX2 is another very well made filter from Fluval which is only let down by the tiny amount of biological filter media which comes with it. The Fluval FX2 filter can easily be upgraded by adding 2.5kg (5.5 lbs) of Biohome Ultimate in the 2 trays, making the FX2 suitable for a normally stocked tank up to 250 litres (66 US gallons) or a heavily stocked tank up to 125 litres (33 US gallons) - for a full nitrogen cycle, not half a job. *TIME STAMPS*: 00:00 Intro 01:48 Comparing the FX2 to FX4, FX5, FX6 02:20 Looking inside the filter 04:15 Comparing the FX2 filter trays to the FX4, FX5, FX6 filter trays 05:40 Fluval set up (foams) 06:30 Fluval set up (biological and chemical media) 08:25 Upgrading the FX2 filter (foam options) 16:45 Upgrading the FX2 filter (biological media) 19:10 Summary of changes 20:04 How Biohome filter media works and how I worked out how much media to recommend 21:42 Tank size / stock recommendations 23:06 Warning about (some) water conditioners 24:52 Outro Please post your reports of using the Fluval FX2 canister filter long-term in the comment section - that is what it is for. Thanks in advance. As long as you avoid using damaging water conditioners which starve the bacteria in the system by messing with the ammonia, nitrite and nitrate there is no reason why you shouldn't be able to achieve a full cycle (0-5ppm nitrate) when your filter is properly sized and set up well with suitable filter media. That's what this series of videos is all about so if you've found this video useful please share it on Facebook, whatever Twitter is now or any other 'social' media sites.
If you'd rather watch these videos with no ads then check out my Odysee channel here: https://odysee.com/$/invite/@PondGuru:0 I have my settings on YouTube to be the bare minimum of one skippable advert at the start of my videos so if you see more than one advert on my videos please let me know and I will challenge YouTube.
If you've enjoyed this video please check out the playlists on my channel for hundreds more - on a variety of subjects. Feel free to share or link any of my videos on facebook, twitter, forums etc. for the benefit of anyone you think may also enjoy watching. See you next time. Pondguru (Richard)
Hi there, welcome back to another edition of Pimp My Filter
and in this video I've got a big smile on
my face because I'm taking a look,
or we're taking a look at another filter from Fluval
and they are generally very good. And this one is the FX2.
It's the wee little baby of the family.
We've got the FX5 and 6 which are pretty much
the same filter, FX4 and FX2.
And really it needs very little introduction
because the FX range of filters are used
extensively especially for people with predator tanks,
cichlid tanks, goldfish tanks, tanks where
you need quite a lot of mechanical filtration
and also a good amount of biological filtration.
Now before I get it out the box I'll just read a little bit
of information from Fluval themselves from the box.
They say it is suitable for a tank of up to 175 US gallons
or 750 litres and the pump is capable
of shifting 475 US gallons per hour or 1800 litres per hour.
Now that sounds like a big flow rate but as we know once you fill
the thing up with media you put it underneath your tank and the pump
has to draw the water out and then pump it back to the tank.
You can take a good amount off there,
often 40-50% depending on the situation.
But nevertheless, that is still a good flow rate.
Let's get it out the box.
There you go.
This was sent to me by a guy called Philip,
who lives reasonably locally.
And it's still got the protective wrapping on because it is brand new.
So this is exactly how it comes set up from the manufacturer.
Nobody's been inside it tampering with anything.
Unfortunately, I don't have an FX4 to size it against.
But you can see...
It is much smaller than the FX-5 or 6,
and FX-4 would be exactly the same diameter as this,
just a little bit shorter, so it'd be roughly the same height as that,
but the FX-4 would be that diameter, and the FX-2 is that diameter,
so it's definitely more compact than the older filters in the FX range.
I've got the same sort of process to get into the FX2,
obviously these are slightly different to the previous.
FX filters in the range, but similar sort of thing.
In and out, so you can't make a balls of setting this up.
And just like the others in the range, there's no pump in here.
The pump is on the bottom.
Okay, now obviously that is the bigger one, the FX5 or FX6.
On the left, I've already upgraded this one, as you can see.
That is the new FX2.
There's quite a difference in the diameter.
And also there's a difference in this distance here.
So this foam.
is less thick than the foams that I've put in here,
we've got almost two inches of space there to put
foams in, whereas here it is probably near an inch and a half maybe,
so I'm not expecting to get both
coarse and medium foams into the new filter.
So the water comes in the top of the filter, down this
pipe, then goes down here right to the bottom
of the filter before swirling around the outside
Of the trays.
Going through the mechanical filtration
which in this case is foams or foam and then it comes up
this little space here between the foam
and the inner part of the tray down through the
central parts of the tray before being drawn back in by the pump
and pumped back to the tank.
That system has worked very well for Fluval
and very well for the FX filters
for many years I've got no complaints about how
that works it's it's a good system.
Now the central part of the new filter is the same diameter
which is roughly six and a half inches
or 16 centimetres or thereabouts as what it
was or what it is in the FX5 and FX6 and also FX4.
So it should hold a similar amount of media per tray.
Bear in mind there's only two
trays in this one. FX5 and FX6 have three trays, FX4 has two trays.
Do you know, before I start pulling this apart,
I actually forgot to mention the build quality.
Well, you know, it's a Fluval FX filter. The build quality is great.
So nothing really needs to be said about that.
Just like the FX4, 5 and 6, trays come out like that.
And hopefully in there you can see the point where the water comes in.
So that little C-shaped bit here, that's where the water comes in.
And it swirls around here.
We've got a bit of a recess to catch heavy muck.
Okay, so that is our two trays,
and this is exactly how it comes set up from Fluval.
Now, bear in mind that the water swirls around
the outside of these trays,
goes through the foam, and then down out the bottom into the pump,
and then gets pumped back.
Now, for the FX2, Fluval have gone with a good quality foam again,
but they've got little bumps on it to increase the surface area.
That is a good upgrade over the previous FX filters.
And because we've got two trays,
we've got four pieces of foam like that,
as our first part of the mechanical filtration.
That's good. Bear in mind that's coarse foam
around the outside,
and unfortunately the next thing it hits is another coarse foam,
so whatever managed to get through here
is certainly going to get through here into our
filter media.
Now in the top tray we've got some of Fluval's standard
rings as the biological media.
Unfortunately, that bag only weighs 180 grams.
There is one in the bottom tray as well,
so that makes 360 grams, which for you guys in the US
is around about 12.7 ounces of filter media,
which is expected to be the biological media.
That equates to roughly 0.79 pounds.
So into the bottom tray.
We've got a couple of bags for the filter media,
another bag of that ceramic rings in
this tray which I will not be putting back in the filter,
and then we've got a carbon
pad as the last thing the water hits before it leaves the filter.
That is in the right place
because you always want your chemical filtration last.
You would always go mechanical, biological, chemical.
I'll just get all this lot stripped out.
That way you can see exactly
We'll be filtering your tank water.
Okay, so as far as the mechanical filtration goes,
we've got four coarse foams, another coarse foam,
and that's it.
As far as the biological filtration goes,
we've got 360 grams or 12.7 ounces
or 0.79 pounds of standard Fluval rings.
Then for the chemical filtration,
which bear in mind you don't always need,
we've got a little carbon impregnated pad.
Now, we can definitely do better than that,
especially on the biological side,
that in a filter
which is supposedly going to filter up to 750 litres or
Oh.
175 US gallons,
it just simply isn't enough biological filtration. Luckily,
With the amount of foams,
you will harbour a decent amount of bacteria in there and you
should never get a problem with ammonia and nitrite,
but this series is all about setting
filters up to try and create a full cycle,
which is the processing of ammonia and nitrite,
but also the nitrate,
because that is perfectly possible in any filter, with the right media
and enough of that media
for the stocking situation, as I'll explain later.
Now in the previous videos that I've done on the FX series of filters,
I haven't really thrown up any negatives about how they come set up,
I really should have done, because that just isn't enough,
and given the fact that Fluval do at least two types
of biological filter media, one of which is actually called BioFX,
I think they could put a hell of a lot more filter media
into these trays when they're
selling the filters, especially given the price
of these filters, because they aren't
cheap, they are towards, well they're definitely a premium filter,
and really if they're selling
a premium filter they should put
the best filter media in and plenty of it, otherwise
It's...
It's just not going to be as efficient as it could
be I mean that's it's pretty obvious and then
people are going to go and have to top up they're going
to tip this and then go god there's naught
in there and of course nine times out
of ten they'll go back to Fluval for more of these rings
and that's an add-on sale that you guys should
not be having to make you know so
that won't endear me to Fluval but it is what it is you know
You know?
And that's what this series is about,
upgrading filters so that they actually work properly, how they should.
Oh, and this part of the video is really just for the people who say,
I've pulled my filter to bits and I can see bits of bio-home
in the bottom, a few bits of reddish coloured sand.
Can you see that in the bottom of there? That is from the fluval media.
You know, you can see it. It's gritty. And that's when it's bagged.
Imagine how much grit you're going to get off when it comes out
of the bag and you're cleaning it and putting it back in.
You know all good porous media will shed something
and the pump will have no problems just spitting
that back out. Previous FX videos that I did,
if you've seen those you'll remember that I put a
coarse and a medium pad together just
as was demonstrated earlier for that FX5 that we took
a look at and that would go around the outside, whoops, like so.
So the water would go through
through coarse and medium before dropping down through our trays.
Because of the limited distance here,
we can't do that, so a few different choices.
With the Fluval foams,
or some sort of generic replacements from the likes of Finest Filters
in the UK, they do good quality foams, perfectly fine,
you know, these foams will last for ages,
take them out, clean them, when it comes time to replace them,
just replace them with something
Nothing generic that's made for this filter.
We could go with one.
of those bumpy foams
but as you see it's not very thick, it wouldn't fit in there so
whilst it will give us more surface area
on the outside it's not as thick as the Fluval foam or
we go with one of the medium foams.
Now in light stocking scenarios like a planted tank
where you just had community fish
that one would probably work pretty well
really that's a better one to demonstrate
the increase in the surface area on the outside.
The water goes down to the bottom of the filter first,
swirls around, goes through the sides
of your trays and then down through the rest of the filter.
Some people might want to put coarse foam
on the bottom, medium foam on here.
The coarse particles, the big bits of muck
and fish waste and so on will probably hit this one
first before they go through and then they'll go that one
because obviously the heavier the
particle is the closer towards the bottom
of the filter it's going to stay. So you've got that
option as well. What I would suggest is if you stick
with the standard Fluval foams which are
definitely coarse on the top
of your top tray I would advise putting a medium density pad.
To catch the vast majority of fine muck as well,
you could put a fine pad underneath
that to polish the water before it gets
to your filter media in the middle of the trays.
Quite a lot of usable space in the top tray,
so it leaves a lot less room for filter media.
Here's the strainer
which draws the water out of the tank into the filter, so if you
If you want to, you could take that apart.
Put in a piece of coarse foam.
coarse foam in there so the water has to go through the coarse foam
before it gets drawn out into the filter. Then
the outside of your trays you could go with the medium
density pads followed by fine pad
in the top of the top tray and bear in
mind it doesn't have to be that thick
you could probably rip that in half.
Well this is, it will clog quite quickly especially in a tank that has
quite high filtration demands, cichlid tanks, goldfish tanks,
That sort of thing, you know?
So you will have to take this apart and clean it quite regularly.
Of course you could go with a big block of foam all the way around here
and that wouldn't need cleaning quite as regularly
but it wouldn't look very nice in the tank.
A few times when I've been making
these filter videos that I really have no idea
I have no idea what the best foam setup
is for the outside of the filter.
It really just depends on the situation you've got in your tank.
How many fish are in there,
how much waste they produce,
how often you're prepared to get into the filter and clean it out,
etc etc. A kit for people to buy which will have coarse,
medium and fine foams
and the necessary filter media to fill up the insides of the trays.
As far as the foams go,
you just put them in wherever you want to put them in, you know.
The pads that I supply in the filter kits
are 11 inches by 17 inches.
That works out perfectly for the FX2
because the length of foam needed
is exactly 11 inches to fit into here.
So you just have to cut them into strips,
nine centimeters wide, which I think is,
what, three and a half inches or thereabouts.
So nine centimeter strips, very easy to do.
You just cut it with a pair of scissors.
If you wanted to change from the Fluval foams it's entirely up to you.
Red trays that find
themselves in the new versions of the FX filters
are really surplus to requirements, we don't need
those. Real shame because they're really well made,
that's great quality plastic you know,
but we just don't need it. I would much rather see Fluval,
instead of putting these in the filters,
put more filter media in the filters,
that's way more important than having these trays.
is what we have to fill with filter media.
The bottom tray will be filled up completely with
filter media. Top tray will be filled up most of the way
but it will leave space for our fine pad.
And as I mentioned before you could rip
this in half to make it half as thick
and therefore you get a little bit more
filter media in than I will today.
So in the bottom tray we can easily get a kilo and a half,
with a careful packing, we could probably get a bit more.
That's a kilo and a half of Biohome Ultimate,
and for you guys in the US, that's the weight along the bottom there.
In the top tray, because we need to leave space for either a fine pad
or a medium pad, we can only get about a kilo in.
It's a perfect fit,
and even with that thick
pad, pretty much
a perfect fit.
In there, so the water goes through the outside, down through
the fine pad, then through two and a half kilos of BioHome Ultimate.
Again, for you guys in the US, that's what it is in your language.
Obviously, if we went with the medium pad in the top,
you should be able to see that we would get more media in here.
So we could probably get up to...
I don't know if we'll get three kilos in, but, you know,
we could certainly get more than two and a half kilos in there.
I haven't tested to see exactly how much, because there's so many
different ways of setting up the foams and fine pad in this filter.
So now we've got mechanical filtration,
mechanical filtration, biological filtration,
and if we wanted chemical filtration,
that would go on the bottom of the bottom tray underneath that media.
One of the ways you can vastly improve
the efficiency of this particular filter.
You just do whatever suits you.
The kit that I'm going to produce for this will have coarse,
medium and fine foams in, so you can just set it up however you want.
It'll also have the two and a half kilos of filter media in as well.
The filter media is the most important thing.
The biological side of things needs to be improved on this filter.
I cannot ever imagine anybody running this filter just
with that amount of biological media.
That simply isn't enough.
Fluval biological filter media from 0.7 pounds
or 360 grams to two and a half kilos or 5.5 pounds
which is a massive increase
and also that translates straight to a massive amount of
surface area that's being created in there for the bacteria
and because it's the home ultimate in
there you've got the outer parts
of the media supporting aerobic activity to make sure that
that the ammonia and nitrite is always zero.
But you've also got the core of each piece of media acting
a little bit like a miniaturised deep sand bed.
No matter how much flow you have going through
the trays of filter media,
inside the media there's always going
to be slow flow zones due to how it's constructed.
It's basically just like a miniaturised deep sand bed.
The water will always find the easiest route,
which is around the filter media.
It won't be forced through the filter media.
Some of the tunnels go nowhere, some of them end in big cavities,
some of them will have slow flow zones, some will have no flow zones,
so that's where the anaerobic activity happens,
which will reduce the nitrate.
I'm the only person dealing with filter media
who's actually taken the time to work out exactly how much filter media
is needed to get that full cycle and that reduction in nitrate.
And that took me about 10 years
of communicating with thousands of people
who've used the BioHome in all sorts of situations all over the world
with all sorts of different water conditions.
Time, because that allows me to confidently tell you now
what size of tank and what stock this filter,
once upgraded, would be suitable for.
And bear in mind, we're talking about a full cycle.
We're not just talking about zero ammonia, zero nitrite,
which is easy to do with minimal filtration.
We're talking about the full job.
And Fluval said that this was suitable
for a tank of 175 US gallons or 750 litres.
In reality, three times exaggerated.
Because we've got two and a half kilos of media in here,
for a normally stocked tank,
it would be suitable for 250 litres or up to 250 litres.
And that's 66 US gallons.
If it's a heavily stocked tank, you can halve those figures
to 125 litres for a heavy stock or 33 US gallons.
And that doesn't sound like much,
but bear in mind we are talking about a full job.
If you're not bothered about the nitrate levels
and you want to do huge 70-80% water changes every week
if you've got cichlids or something,
just stick with what comes with it.
Ammonia nitrite is easy to control,
but if you want a full job, I would suggest
upgrading it. You know, even if you didn't want to use the BioHome,
Substrat Pro is probably what
I would recommend.
It uses a slightly finer particle to make the little balls, but it will
support aerobic and anaerobic activity.
It's just a shame that it's not made in a different format
with different particle size, but that's a good second choice.
I'll put a link to that in the
video description. Thanks to Philip for sending me this.
I'm going to get it boxed up and sent
sent back to now so you should receive it back tomorrow. I just want to
Hammer home the point that I've mentioned
so many times in these videos, that if you
want to achieve a full cycle,
do not use a water conditioner which messes with the ammonia,
nitrite and nitrate.
Even if the manufacturer says,
oh it only locks it up for 24 or 48 hours, it messes
with the food that the bacteria needs,
so it creates an artificial famine for the bacteria.
So instead of your filter, once it's upgraded, being, you know, 100%,
every little surface full of bacteria all consuming
the ammonia, nitrite and nitrate,
that food just simply isn't there for them.
So the population might be down to, I don't know, 25, 30%.
And you can see that demonstrated in quite
a few of the videos that you see online.
A few, but a few.
No, I'm not going to name names.
But if you're watching any...
videos online especially people with cichlid tanks
and they're doing you know 70 80 water changes
they're basically telling you that the filter isn't doing a job
and they're always using that conditioner
which pretty much murders the bacteria by starving it
of the ammonia nitrite and nitrate just use an ordinary dechlorinator
Simply makes the water safe for life,
the bacteria can populate everywhere in the tank,
and you only need to do minimal water changes.
Just as long as it takes to go in with a gravel
cleaner, clean up, drop, you know, this much,
this much, this much water out your tank,
that's as much as you need to do.
Nobody should be doing 70-80% water changes
and then telling you that the water's perfect because it isn't,
and the filter is dead.
Thank you for watching, I hope it wasn't too boring for you
because my voice is not the most interesting voice,
but if you can suffer any more of me
then this video is in a playlist called Pimp My Filter
and I think there's over 90 videos in that playlist now,
so if you've got those videos simply to show specific filters,
how the water flows through them and how they can be upgraded,
even if you don't want to follow my instructions on using the biohome
or even changing the foams, if you know
How the water flows through your filter,
you can make improvements to it.
Thanks for watching, I'll see you in the next one.