Thanks to Rob for sending me this filter for upgrade. *YouTube doesn't send me any notifications so apologies if I miss comments here*. (Links below may be affiliate links which help to keep the lights on in my bunker). Superfish Corner Flow 400 filter (Amazon): https://geni.us/PeAtK Filter media, foams etc. http://www.filterpro.co.uk TIME STAMPS: 00:00 Intro and filter description 02:20 Looking inside the filter (how it comes set up by manufacturer) 03:32 First upgrade method (no heater in the filter) 06:31 Second upgrade method (with heater in filter) 07:36 Final thoughts and outro For a nation of filtration information check out the FilterPro Q&A page: https://filterpro.co.uk/qa-24-w.asp The Superfish Corner Flow 400 filter seems to be well made, has a reasonable space for foams and media (when a heater isn't used in it) and at only 6w it will be cheap to run. Do you have experience of this filter? If so then please leave a comment for the benefit of viewers who are interested in this filter.
*As long as you use a normal water dechlorinator (e.g. API Stress Coat) which simply makes water safe for life and not a water conditioner which actively starves bacteria by locking up the food it needs or / and adversely affecting the bacterial binary fission process (e.g. Seachem Prime / Fritz Complete) then you can achieve a full cycle in any tank with the correct filtration, sized properly and set up with full filtration as the goal.*
My website has a nation of useful information including answers to specific questions to bring clarity to much of the online nonsense and fake 'science' (scientism) about filtration here: https://filterpro.co.uk/qa-24-w.asp
If you have an aquarium filter of any type you would like me to upgrade in a future video (upgrade and returned for free) please contact me - details below. *Please check that I haven't featured your filter in a previous video - upgrades are for UK only due to high cost of international return shipping*
Thanks for reading / watching. Richard 07772848730 [email protected]
Hi there, welcome back to another edition of Pimp My Filter,
and in this video we're going to be taking a look at an internal filter
from Superfish, and this is the Corner Flow 400 in white.
Now when I saw that I was shocked, but what I didn't realise
is that Superfish make little cubic tanks which are either white
or black, so this obviously would suit the white tank,
and the black one would suit the black tank.
So as long as your glass is no more than 6mm thick,
which for you guys in the US, I shall put the measurement along there,
you can hang this in the corner,
water's drawn in through the bottom, through the side,
goes through a foam and it's spat out back to the tank.
There's also the option of having a heater in here as well, so you
can hide your heater, in a similar way to the Owasi corner filters.
That adjusts the flow from 200 litres
per hour to 400 litres per hour.
Which on the face of it doesn't sound like much,
but when you're not having to lift the water up
like you would from a canister filter that would sit under the tank,
you're still going to get,
you know, between two and four hundred litres an hour.
There's no restriction on that really,
other than whatever you choose to put in here
and how long you leave it before you clean it out.
And also if you want to change the direction
of flow through the spray bar, you can do that.
Now this is recommended for a tank.
200 litres.
And really a filter of this size hasn't got a cat
and hell's chance of keeping the water perfect,
i.e. delivering a full cycle in a tank of that size.
Keep it healthy enough, you know,
you shouldn't get any ammonia and nitrite,
but considering the fact that they advise changing
the guts of this every month,
it means that every month you're going to be left without filtration,
until two or three weeks down the line until
it builds up and then you change it again.
That advice is, I mean, it's retarded at best.
It's just silly. Now this filter does have very
substantial release clips.
One on that side, one on that side, to get the top off.
You can see them
there. I mean, that's nice thick plastic.
So that's your pump head, flow control, nothing really more
to say about that. So I'll put that to one side
and we'll have a look what's in here. Okay, so
that's the intakes on the bottom, on the side.
Nice, thick, good quality plastic. And inside of
We've got a lump of foam,
which is somewhere between coarse and medium density.
And then inside of that foam,
a little bit like some of the Fluval filters,
we've got some zeolite and carbon.
There's approximately 50 grams of it in there.
That's it, really.
It's basically just a sponge filter.
Which, you know, as you know, I'm never really a fan of them.
They do keep the water clear and pretty healthy,
but we can do better than that.
So I'll show you two different ways to set this up.
I'll show you how I would do it,
assuming you're not going to have a heater in here,
and then I'll show you an alternate way to do it.
So that can stay. What's in there can go.
To show you how little chemical media there
is in here, that's it.
Because this is a decent quality
foam and we've got the pre-drilled hole in the middle,
we can put some bio gravel in there.
That'll really boost the biological side of the filtration
so you've got all your mechanical
filtration with the foam and also a bit of biological as well
but you're adding way more
if you put some bio gravel or similar media in there
and that will take approximately 85 grams.
Put the little cork in the top, bang that back
in and that's boosted that section.
Now hopefully you can see
that but this panel, this dividing panel here,
the bottom end of it there's a lot of slits.
And that allows water into this back section
where you would normally have a heater.
If you're not using a heater, this area can be filled with more media.
And into here, you can get approximately 235 grams of bio-gravel.
There you have it.
That back section is totally filled with media,
and that'll be a very slow-flow environment,
which will be excellent for hopefully harbouring
not only aerobic towards bottom,
but anaerobic bacteria as well.
The anaerobic bacteria should help with the nitrate,
the slower the flow the more anaerobic
the conditions go and if you've got it
in a safe environment like this it can only do good,
it can't do harm. That goes back in the front,
so now we've got the mechanical filtration
offered by the foam and also a bit of biological,
extra biological filtration
in the centre of the foam
and a lot more biological filtration in the back.
So that's our bottom section done,
just bear in mind that when you come to clean this thing out
Be very careful because if you spill
this it's going to be all over the place.
You could put it in a mesh bag
but that would take away how much media you can get in there
so I would just advise filling that completely with media,
don't bother with a mesh bag.
Locked in, yes it is, good and that's the thing upgraded
to be a hell of a lot more efficient
than what it was. Okay
so if you are using a heater in here obviously you kind of put media
in there because the water needs
to flow freely around the heater so we take that out.
So now that's empty, ready to accept the heater.
This foam can also come out as well
because we really need to go to town on this bit
if that's our only biological filtration in here.
Now you could cut this foam down
to just above the level of the intake.
So you have a little bit of biological media
inside the foam
and then you could put more biological media in here.
So imagine that cut roughly in half,
plugged in into the bottom.
That, which is a 250 gram bag of bio-gravel on top.
It's actually a perfect fit in there.
So you'd have foam in the bottom, media in the top.
So there you go, it seems to be a well-made filter.
You can get, you know, a reasonable amount of stuff in it.
No way on earth I would ever recommend it for a 200 litre tank.
But, considering how much media we got in in both instances...
Yeah, kind of, you know, 300 grams or thereabouts.
Um, yeah.
I mean, as far as a full cycle goes,
a 30 litre tank, maybe, 40 litre tank.
If you just want the water clear and healthy,
maybe it's up to 100 litres.
But expecting a full cycle from most internal filters
is a bit of an ask,
because you just can't get enough media in.
However, if you're interested in this filter,
I shall put the links to it in the video description
and also in the pinned comment,
so you can check that out, as well as links to my website
where you can buy loads of filter media, foams,
all that sort of stuff, basically anything
you would need for upgrading your filters.
And I hope you've enjoyed this video and found it useful.
If you have, give it a thumbs up.
Feel free to share it wherever you want online.
I'm not exactly Mr. Social Media,
so every time somebody shares a video
or puts a link to it anywhere online
is very much appreciated.
We can all do our bit to get good information out there.
Thanks for watching.
I'll see you next time.