Water Hose Turbine Generator
Oct 30, 2026
►Subscribe! https://bit.ly/2m1d1y7
►T-shirts & Hoodies! https://bit.ly/2kABytm
In this video i'm making a simple load test on the water hose generator that i made a while ago. It uses a spherical turbine that is spun by the running water. I'm pretty sure that with a bigger outlet it would have preformed much better. If you actually like this build and you can provide me with helpful advices on how i can improve it's performance, i'm all ears!
Support my videos!: https://www.patreon.com/johnnyq90
Subscribe to my channel! https://www.youtube.com/user/johnnyq90
Follow me on Twitter! https://twitter.com/JohnnyQ90
Follow me on Google+ https://plus.google.com/u/0/b/104633881118655653159/104633881118655653159/posts
This is a water cooler.
what I've wanted to make for many years now.
It's relatively a 28-millimeter copier-copier,
which I secured using a used spherical water turbine,
to give water the ability to do so.
And it is suspended in powerful segments,
It means I've put other pieces into the larger ones.
Thus, I can have a 2 mm output.
It's faster to apply more pressure.
Neither the connector nor the generator is on the same bond.
This is the link,
15-year-old girl
and finally, the coffee to clear the mind
I know that cleaning must be in the place
But for now, this is all I can do.
What I've done here is to
I accompany the entire link
Also, I add some aluminum tape at the beginning and the end.
Just to keep them engaged in the testing process.
Also, I've drilled two holes here on the plexiglass,
so that we can do a little testing
Let's do this and see what we can do.
And this is how it sounds in the compressed air.