This is my axial air turbine that i showed you back in February, which was used as a mini experimental axial steam turbine but due to the fact that the running time was so little, it made it not useful at all. What i decided was to make a prototype wind turbine (not yet made) that will be using this configuration. I'm pretty sure though that this stepper motor is not the best choice to use as generator, so i think i will have to make a research first to find a more appropriate for this application. One of the necesairy mods that need to be done is to fit a large cone on the inlet of the axial turbine in order to increase the incoming volume of air and make it more efficient.
This is my little darling
the aeroturbine we completed in February,
I want to use it for a different purpose right now.
I want to set up a small turbocharging system to
I'll create electricity in a small style, of course.
What I will do is connect the
equipment of the equipment of the equipment,
in the equipment of the equipment of the equipment.
This is the motorcycle I will use.
for this video
It comes from an old printer.
But first, for those who are
interested in a closer video
Of the internal parts, I will ruin the entire plan,
To make it clearer how I wrote it. And this
It's as the aerodrome's rating shows.
When it's entertaining. I'll explain each part differently,
So that you understand how this plan works.
I'll start with the part.
This is a set of 22-1 pieces
made by an electric scooter
and we chose this one because it has very little
development between the parts of the part.
That is, you can see how freely it rotates and
This means that it can create an opportunity.
From the terrace to the safety net with a little care.
Very good pieces.
This is the hammer and the hammer and
of course, the central body of the design.
This is the whistle.
It's where the air enters and guides it
at the tip of the whistle and the whistling.
These are the two whistles where the air is
It goes in and everything is customized and
Sometimes sweetened with epoxidized sugar.
The number is fast.
And this is the trumpet.
It has some profile, as you can see on the squares
It is 13.5 kilometers throughout the entire process.
This is the shaft.
That's 2 kilometers, and I had to reduce it to 1.
kilometer to deal with this small piece.
And believe it or not,
That was the hardest thing I had to do.
This is the front piece and the back.
This brewing is exactly the same as this brewing, opposite
that this baking is treated as part of a larger baking.
And I did that for
to be central to
This piece here.
What I will do is measure the highest RPM of the generator,
which is located from the aerodrome terminal,
Using this telemetric tachometer.
The combination I used here to combine the two
pieces are a silicone rubber used
police police police police
As for nitrocellulose, I found that it holds quite well.
Nice, as it is
You can see,
maximum RPM
It was 4,000 RPM,
which means
that it was 88,000 RPM.
...in the spinning turbine.
At the same time, what I've done here is secure the exit.
of the step-through motorcycle in multimeter.
The point we will take is AEK.
That's right, because the thought here is with AEK.
And this test is conducted in an unfocused state, so let's see how it behaves.
For this test, I will use my turbocharger.
which is designed at 30 PSI to
We see the largest output of the generator.
Nice, as it is
We can see
the largest
The output was 10 V.
so I think that
Now we'll see this one
the construction of
some LEDs.
The pressure in the air compressor is designed with 15
PSI right now, half of the previous one, because...
𨙸
So let's see what it can do.
Uses
so much
a little
pressure
as
generated,
that
can
to
pass by
for
Enough
time
as
Can you
to
See.
I am sure many of you are wondering what this would be useful for.
Before this video,
I showed you that in February I used this terpene with a victim,
But due to the short time, I think it was ultimately a situation.
What I believe next...
to create an innovative turbocharger,
because it turned so easily when it felt the air
That would be excellent for this application.
Using some method of larger open pieces,
something like this fragmented sexuality of fragmenters,
to increase the air application volume
I think it would be very powerful to make it work.
Even in this thought, the best thing he could do would be to
to use a mechanical one,
It's still just an idea that I'm very capable of trying.
I would like to thank you for watching
My video, and we'll see you next time.
Also, don't forget to like this video,
Leave a comment and subscribe to my channel. Great!
