
HVAC GUY
34 followers
Tools I Use In My Videos 👇👇👇
https://www.amazon.com/shop/hvacguy
In this video I visit a lady’s house that was having water problems in a closet near the condenser. I found a water leak in the attic and fixed it! #hvacguy #airconditioning #hvaclife #hvactechnician #skilledtrades #bluecollar #hvactech #waterleak @MilwaukeeTool @SealedUnitPartsCo @hilmorTools @DiversiTechCorp @WeSupplyTrades @RitchieYELLOWJACKET @nucalgonmicrotrainings4647
AI Generated·May contain errors
Video Summary
AI GeneratedA technician investigates a moldy, wet closet reported by a homeowner. After determining the leak is likely related to the air conditioning system, the technician inspects the attic and discovers an unglued PVC drain joint. The leak is repaired by properly gluing the joints to prevent further water damage.
Hey guys, in today's video I'm going
to take you along with me on a call where
the owner of the house said one closet was getting wet
and there was mold in the closet at least
that's what she told me and um she had called the plumber out there
and he said call the air
conditioning guy, stay tuned
you start taking clothes
out, can you see back there
so I don't
know if it's in the wall or the air conditioner
or country I don't know who I need, what in the world
it's bad and that's right there where
your line sets come down, there's probably a drain in the
wall there, I mean that's right, your air conditioner
is on the other side of that wall, that's what I
know um all right, this is directly on the other side
of that wall, if you ask me it's this right
here, all that white right there
makes me think it's draining outside
but all that seems well
attached and glued, this isn't
glued right here, I need to get
up in that attic, I want to see
something there, is just a little bit
of water stain up there, most of it's right here though
but that makes me think it
could start up there, let's get
in a beautiful attic space
and here are my
my two drains going outside what
we basically need to do is look
and see if any of them look
disconnected i'm gonna try to get over
to that one first like if they were they were not glued
well
or something
look that wasn't
and attached
right there
talk about
a joint
that needs
to be glued
tell you what why don't
i pull that off go get
the stuff i need come back
and glue everything
all right i brought this little piece
of plywood up here that's actually three quarter inch
a piece
that i
cut just
so i can
sit on it
instances
like
that one
that elbow
top of this
was wanting
to come off i
said let me try
to bend
that over
and see if i
can't pull that out, all right
I couldn't
film any of that but I've got this piece off I
was afraid it might have some glue in it but it
don't I glued this elbow on I was able to pull it
and get that out that is ready to line up so I'm
going to glue it and glue everything push it in there
and hold it and hopefully we get a good seal
now everything seems well attached I think we're
done here I do hope you enjoy the video if your
PVC joints are not accessible you really should glue them
as a prime example why because it can
cause damage, glue your joints
Thanks for watching, guys.
If you enjoyed, hit that like and subscribe
I will catch you on the next one.
