How To Lead Rope Solo Rock Climb

Memories Transcend Time.
11 followers
23 Video Views·Oct 11, 2026
This video is for rock climbers who want to climb on their own. It's going to be very boring for anyone who does not already climb a lot. Rock climbing is inherently dangerous and climbing on your own is far more dangerous than normal rock climbing so beware! Do not attempt this unless you know what you're doing!
AI Generated·May contain errors
Video Summary
AI GeneratedPeter Jacobs demonstrates the technical process of lead rope soloing at Boulder Canyon. He details the necessary gear, the setup of a ground anchor and belay system, and the specific techniques required to manage rope weight and safety while climbing alone.
I'm Peter
Jacobs,
and today
we're going
to learn how
to lead
rope solo.
So we're in Boulder Canyon, Animal World,
which is a beautiful 11C, four stars.
And here's what you need with your helmet,
very important, Jumars.
Jumars are important because if you're doing multi-pitch,
you will need to get back up
the top of the climb again.
Single pitch, they're not critical,
but not a bad idea just in case you need to send the
rope.
And I've got a pulley on here to reduce
the friction in case I want to get myself back
up a little easier.
A little cord. This is for building a ground anchor if I need to.
So if I want to sling a boulder or sling a tree, something like that,
nice thing to have with you. Not critical, but nice.
Moss draws.
These are, it doesn't really matter what kind you use.
I like using the ultralight triangle draws, but
the important thing on here is that I've got two locking alpine draws.
Those are going to come in very handy later.
You'll see why. Good comfortable harness with my chalk,
and I've got a Grigri and an ATC.
I recommend having both with you
they're good for different things and
really good idea.
Couple extra lockers for our ground anchor just in case and
here is something that's hard to get. This is a silent partner and
micro traxions are not so hard. The silent partner
is our lead soloing device we're going to use today.
It's widely considered to be the best one on the market and
And two lockers to attach that to the harness,
and a non-locker to attach the microtraction.
You can use a locker if you like for that too.
And the type of rope you use
is really important for this particular thing.
If you use a rope that is thinner than 9.8,
it will bind on the silent partner.
And when you're climbing, you won't be able to climb any further.
So you really don't want that.
So definitely use at least a 9.8 millimeter rope.
10mm is fine. This one is also bicolour
which I recommend because if you climb past your
middle mark it's going to be harder to get down.
Alright, that's everything you need
to lead up solo by yourself.
Okay, so on this climb this first bolt and second bolt are
both pretty high up there
and by the second bolt the climbing has started. So you definitely
don't want to fall on your anchor because
then you connect only to one point which puts
a huge shock load on that on that bolt.
So instead of risking that I'm gonna
build a ground anchor with our handy cordelette here.
Alright so I don't
always select my rope when I'm climbing with a partner.
It's not always necessary but
when I'm climbing myself
on leader up solo I always do because you can't
manage the rope as it comes off the ground
and if it gets snagged up there
where you can't reach it you may have
a pretty serious problem so it's super
important to do here. Okay, so it's time to get set up.
I'm going to connect my base of
my rope to my ground anchor here.
To do that, I'm just going to tie a figure eight in a bite,
and then use a locker and connect to my ground anchor.
I'm going to lock that up. All right,
now it's time to put the silent partner in.
So, put the microtraction on my leg for now.
That's where it's going to stay, actually,
about when I need to use it again. So, here
to send out a partner,
and you take out both carabiners so I can open it up and load it.
To do that, open it like this,
and then you gotta tie a clove hitch.
So, tie a nice big one,
and you can slip it over onto the device,
like so. And you want the rope
to be coming out like that,
so either side is on the side that you connect
to. It doesn't matter, the device is
probably ambidextrous I guess,
you can't load it backwards is what I'm trying to say.
But the important thing is that the ropes
are coming out from the top like so. Now take two
small locking beaners and we connect them
to the silent partner so they are opposite the pose
like so,
and then connect both
of those to the harness
and lock both.
So, I've got the rope going directly to my anchor,
and then my slack has come over here,
which is nicely flaked on the pile behind the camera.
And the slack is a problem. If I climb
and I don't do anything with my slack,
if I don't hold it in some way, the weight of the rope will
make the silent partner bind and stop moving.
So I've got to hold the slack. That's what the
microtractions for.
I'm going to open up the microtraction.
I'm going to put it into the
microtraction so that it can slide, will hold my slack,
and then give me slide when I need to,
like that. So it's directional facing towards my silent partner.
And the slack is coming up from
over here. It can't move that way.
It can only move this way. And then I connect that to my leg
like that. And now you see I've got these two loops.
Here's my slack being held, and here is
my rope going directly to my ground anchor.
Okay, so there's one safety precaution
that is essential if you're going
to have any backup besides your silent partner,
and that's tying slip knots. So the theory here
is that if the silent partner somehow did fail,
which I've never heard of happening,
the microtraction is not going to help you
because it's set up to feed in the direction of the silent partner.
So in order to give yourself a backup,
what you can do is tie a slip knot
every five to ten feet down the rope
like this, and they are directional.
You want to make sure they pull
towards... let me show you how this works.
So as you climb up,
you're going to be pulling out more and more slack as you climb,
and then you're going to need to get more slack out
of the base so you pull it through the
microtraction and you're going to reach a point where
the slip knot is at the microtraction now
to get it out you need to be able to pull with one hand
because you're hanging on with your other hand
maybe you'll pull out and have it release
and then you keep climbing and then you reach your second
slip knot and you pull that out now if you do rely
on that as a backup you want to use a locker here
or a non-blocker as I do.
The reason I don't use the slipknots as a backup is because,
first of all, I trust this
device a lot.
I've taken a lot of falls on it and I've never heard of them failing.
And secondly, if the device somehow did fail,
I think that the clove hitch would bind on
the pulley and it would start spinning around until it
was actually bound inside of these
constrictions within the device.
you know, you need to choose your own level of risk here.
The Slipknots are a
good idea. They are essential to have a backup.
They are also a pan and neck. It's
up to you. Got my rope to my anchor, going to my
silent partner. Draw a little loop of slack here
that I'm going to make bigger later. And
normally I don't tag a line,
but we're gonna have my camera guy, Austin Weston
Brock, up there. He's going to come up after me.
I'm going to shoot a little
bit there so it's not
going to lie today.
Here we go.
The L9 doesn't do the
fantastic climb.
It does have kind
of a high first
foot but it's
easy climbing and
because I'm using
a climb anchor,
as soon as I clip
that first bolt, I
am secure. Here we go.
I'm off the ground
a little bit.
I can increase the size
of my loop for slack.
That's a good amount.
It can be larger
or smaller than
that but you just want
to have enough out
that you can clip
the next bolt.
Well, when you get there,
you can pull through, and go.
As far
as grades go,
when you're
starting
out with
this,
you definitely want to start well beneath
where you normally climb, that's for sure.
This is 11C, which is definitely climbing,
but I've climbed it a lot.
I know it really well, it's one of my favorite climbs.
In my opinion, it's
the best 11C I've ever seen, and I love it.
So here's the first crux, and if any of you
who don't want to know the data for this,
I'm
going
to
turn
the
audio
off,
or
turn
the
video
off.
Now the silent partner can tend to bind
a little bit sometimes. If it does that,
you need to get in a place where you can take some weight off of it
and get it moving again.
This is especially true if you fall on it.
We've arrived at about 30 feet up the climb,
and there's two things that's true right now
which is really nice for me. One is that about
30 feet or 40 feet the rope weight becomes heavy enough
that it starts to make the silent partner
bind so we really need to get some of that rope weight off
of off of the silent partner the best
way to do that is with a locking alpine draw
so the other thing that's important here is that i'm
in a good good position i'm not going to fall before
my next piece that's going to become very
important in a second so i go ahead
and lock this to the draw to the bolt and then i'm going to pull
up my slack until it's fairly tight not ridiculous
but fairly tight and uh it's not hard to bind up
a little bit okay so i'm going to tie
a clove hitch here you can do an alpine butterfly as well
if you have the hands to do it
and i'm going to clip this to there now the reason i use a locker
on these is because it's going to get ripped around
when you fall and i've actually had these
unclip themselves. So I like to use the locker there.
What that's done is that's taken all of
the rope weight off of me, off of my silent partner.
You see how this is slack now? But
I've also created a little bit of a dangerous situation
because if I fell right now, the only
thing that would catch me would be this one bolt.
And that's dangerous because I can shock load the
bolt and possibly make it fail.
But as soon as I clip the next bolt, let me go ahead and do it now
and I can show you. Right now,
the only thing in my system
is this 5 feet of rope, right?
But the cool thing is, is that as soon as I clip the next bolt,
I actually get the entire
rope length back into my system,
which is important because the more rope you have in
your system, the softer the catch.
And you also want the weight on the ground anchor.
So let me show you how that works.
So, because this alpine draw is extended, as I pull up,
not pulling on the draw.
That draw holds the weight of the rope but I have all 30
or 40 feet of rope in my system just by clipping this next one.
So when you have
to do that you want to be sure you're
not going to fall between yourself and
the next piece. One thing that's important
is not to get your lines too tangled or
tangled at all really.
You want to make sure that your slack is separate when you clip the
rope. It's going down exactly where you want it to go.
And your slack is over here. Okay.
And
go
in
hard
and
do
it.
I
can
do
a
clove
hitch
one-handed.
Not
the
easiest
thing
in
the
world,
but what you
do is you clip it
in the carabiner.
Take all the
slack out before.
Remember I need
this to
be fairly
tight
so that the
rope weight
is in her
to one bolt.
So I'm going
to move very
carefully.
Yeah,
give me that,
right?
Oh my
camera man,
he's great.
So we're
at the top
of the climb and I'm clipping at two points here.
I'm clipping mine in the draws. The point is here
is that what we're going to do is see our system
if you can see through all this crap is just two
big rings here and so to get off this thing
and clean my anchor what I'm going to have to do
is draw up my entire rope and then pass it through the anchor
and then hang the entire so I'm going
to go ahead now let's do a quick little cut all right
so I've taken up all this slack here
I've passed it through my anchor
so now my anchor at the base of the climb is still fixed
and still got it for us.
So I'm going to go ahead
and undo my silent partner.
There actually is a way to
repel on your silent partner.
If you do a search from YouTube for how to repel on a silent partner,
you'll find another cool video by a guy who made it.
He'll explain better than I'm going to here.
But for me, I'm just going to use a Grigri
because it's nice and easy and it automatically locks up
for me and makes it
really easy to clean.
So this twist
is not ideal.
It's not the end
of the world.
I can deal with it. So now I'm actually still using
the bottom anchor for support.
I can get my weight on the Grigri and get it off these draws.
I am
ready
to
boogie.
go for my ground anchor. Two of my anchors up there, not tied.
