An uncompromising commitment: perfecting the driving experience.
From the frozen expanses of northern Sweden to the searing heat of southern Spain, the Bugatti Tourbillon is tested around the world in the most unforgiving conditions.
In Episode 19 of the documentary series “A New Era,” Bugatti heads to the racetrack in Seville to put the Tourbillon through its paces in the heat of southern Spain. In a place where temperatures can rise well above 40 °C (104 °F), the Tourbillon prototypes are subjected to a completely different kind of stress.
Danny Rios, a vehicle development engineer at Bugatti Rimac, leads extreme heat testing in Sevilla, Spain. The sessions focus on validating the cooling systems, powertrain stability, and cabin comfort of a prototype vehicle in temperatures exceeding 40°C, ensuring that simulation data aligns with real-world performance before global delivery to customers.
My name is Danny Rios. I am a vehicle development engineer in Bugatti Rimac,
basically in charge of organizing the testing sessions,
the preparation of the car, instrumentation, testing sessions like this one.
Where instrumentation is really important to make sure that all instrumentation
is working and is meeting the requirements to what we want to test,
and finally the execution of the test in the location where it's taking place.
We are reaching more or less every day temperatures well over 40 degrees.
We are here to do the car in these extreme hot conditions
and make sure that all the systems are performing as they should.
Welcome to the south of Spain. We are currently in Sevilla.
We are here to test our car today. We are on board of one of our protos.
This is the VPPB phase, so we have VPPB ten.
Everything started approximately 15 months ago.
We were in Dubai with plus fifty degrees.
On the XPS vehicle.
The main points that we are testing here in this hot climate testing are three.
On one side, we are calibrating the HVAC in the cabin
to make sure that it is comfortable for driver and passenger
when we drive in this in such extreme conditions. We are also testing
the temperature on the main critical components and different vehicle areas.
We have over two hundred thermocouples installed in the car to make sure that all
these temperatures are controlled and are remaining safe during during this testing.
Finally, we are also validating the cooling systems in the vehicle.
We are driving the car in different conditions.
So we are we are driving on track, we are driving on the road,
high speed, low speeds, to make sure that the car remains cooled down
and all the temperatures again remain within safe limits.
So we have the B16, and of course we have also the powertrain that is hybrid
and contains as well the 800 volt battery.
Plus we have three electric motors, two in the front, one on the rear.
The gearbox, and it's quite difficult to put everything together
because it's quite quite powerful. There is a lot of cable.
The space is quite tight, so the car doesn't really breathe that much.
All these powertrain components are high-performance components,
so they all reach very high temperatures.
The main challenge here was to be able to cool down these temperatures
while also maintaining such an outstanding and sleek design on the car.
In order not to compromise the shape and and the design,
we have very clever cooling circuits and cooling systems inside the car
to make sure that all the systems remain under control temperatures.
When you have a lot of power.
But you don't feel comfortable on the track or on the road.
It's very difficult to be precise, no. So it's very important to keep
the comfort in the cabin and the temperature in the cabin quite fresh,
to allow you to allow the customers as well to enjoy the car at its best.
These two testing sessions are very interesting testing sessions for us.
We are delivering cars all over the world. We have customers from lots of places.
They are going to drive their cars in different conditions. We need to make sure
that these cars perform properly in all this variety of conditions.
Compared to the winter testing session, a critical point is the cabin temperatures.
In this case, in the opposite way, we need to make sure that we heat it up properly.
Here in Sevilla, we need to make sure that the temperatures are cool down enough.
But in any case, the target is to make sure that the cabin is comfortable for driver
and passenger. It's a completely different kind of test.
We can have 45 degrees on the open road,
but we cannot push the car that much, as I did before.
Or consistently at those speeds. So we need the racetrack,
and in the racetrack we have a completely different environment.
Also, what you are doing on the racetrack, you cannot do it on the road
because you are not eating up the tires, you are not eating up the brake system,
you are not eating up basically the full package of the car. So it's very important
that we make sure that when you fully push the car to its limit on on the racetrack,
the car reacts in the same way that we see on the on the public road.
I hope that our customer will enjoy and experience both case scenarios
because it's very nice. The car is really really cool to drive.
In order to make sure about this,
we have all this extensive instrumentation in the car.
We have also live measuring devices that are broadcasting
the measurements that we are getting inside the car,
out to our team that is also checking the live data while we are on track,
and in this way we are just making sure that all the temperatures are good.
And if they are not good, they quickly let us know and we stop the test.
We check the data, we do the fine tuning that it is needed, and we go again.
Quite amazing, and the cabin—it's very, very pleasant to be on it.
And the HVAC is still blowing the same amount of airflow,
same amount of temperature, so everything is stable.
No differences. Very, very good.
We were able to collect all the data that we wanted. We were able
to validate most of the systems that we were planning to to validate here.
In the end, nowadays with simulations, you already get a lot
of information of how the car will behave in certain conditions.
What we are doing here is to make sure that what we saw
on the simulations is actually happening on track, and that's how it is.
So we are very happy that we collected the data that we were supposed to collect.
That we can see on the results that all the efforts from all
these previous years is paying off. So overall, a successful testing session.