This Easy DIY High Tunnel Can Be Built In ANY Yard For Gardening

Architectural Course
8 followers
AI Generated·May contain errors
What's going on, gardeners? It's Sunday, February 19th, and spring is almost here on the southeastern
coast of North Carolina. And on today's video, I'm going to show you how to build the easiest,
cheapest, most versatile high tunnel that you could possibly build in your backyard garden.
If you're new to the channel, please consider subscribing and hitting the bell to receive
new video notifications and check out our Amazon storefront and spread shop in the video description
for a list of the gardening products I use and awesome custom designed apparel and other gear.
My favorite things to grow in my summer garden are tomatoes, figs, cucumbers, and zucchini. And
all of those plants suffer horrifically in places that have wet summer climates. The rainfall ruins
the fruits and it gives the plants diseases. And here where I live on the southeastern coast of
North Carolina, we have torrential rains during the summer that destroy those plants. The way
commercial growers deal with this is they either locate their farms in areas with arid summers,
and they usually place them near river deltas so they can irrigate their farms adequately,
or they grow them underneath high tunnels and greenhouse structures to keep the rainfall off.
Of course, as backyard gardeners, we can't pick up our backyards and move it to a different location
where it gets less rainfall in the summer. And we have to deal with the weather that we get.
Our only alternative is to build some type of structure to try and keep the rain off. But for
many of us, this is not practical. High tunnel and greenhouse structures are not only very expensive
and very large to the point where we really can't fit them in our backyards, but due to zoning laws
and neighborhood and HOA restrictions, most of us simply couldn't even build one of them legally,
even if we had the room for it. As an engineer by trade, I'm always looking for a solution to
the problems that I have. And last year, I built this really inexpensive hoop house structure to
try and keep the sun from scorching my plants that I had underneath it during the growing season,
because it gets so very hot here in the summer. And I build it pretty much for free, just out of
materials that I already had in a pile in my garage and in the corner of my yard. And it works so well
that I'm going to expand this structure to not only provide shade protection during the heat of
the summer, but to grow more crops underneath it to keep the rainfall off during the rainy season,
and also to keep the frost off in the early spring and late fall to extend my growing season.
To the extent that I can, I will list the materials that are available for purchase
online down in my Amazon storefront in the video description. So click on that link and
go over to the list, trellising supplies, and I will list everything I can for online purchase.
To build this simple tunnel structure, I'm basically only using four different pieces
of material. The first are T posts, and this is a six and a half foot T post. I purchased
this from Tractor Supply, but they also come up to six foot lengths at Lowe's and Home Depot.
So you can get them there up to six feet if you wish. The next thing I'm using is three eighth
inch rebar. And again, these came from Lowe's in the concrete aisle. And the only other parts that
I'm using are these hose clamps, which I will have linked in my Amazon storefront under trellising
supplies, and then half inch by 10 foot long sticks of PVC electrical conduit from either
Lowe's or Home Depot or your local electric supply store. And just to be clear, we are using the
electrical conduit from the electrical aisles, not the 10 foot sticks of PVC pipe from the plumbing
aisle. The PVC pipe in the plumbing aisle is not UV treated, and it will break on you after only
about a season or two. The electrical conduit, which is a few dollars more, will last a lot
longer. So it's worth the investment upfront. Aside from that, the only other special tools
that we're using is a ladder and a T post driver to help make our life easier driving the T posts
into the ground. And again, this will be linked in my Amazon storefront. How much of each material
you will need will depend on how large you want the structure to be. I created a design and I will
overlay it over this for a 13 foot wide by 36 foot long poop house structure. So this is what I'm
going to be building. You can follow my design exactly, or you can modify it to how you see fit.
But this is exactly the list of materials I'm using for this exact build. I've begun the
teardown of the existing structure as well as the layout of the new structure. And now I want to
take you in for a closer look so I can show you how to easily, precisely lay out a structure in
your backyard. The easiest way to lay out a structure with precision is to pull a string
line. And to do that, you would take a measurement from two points, say off the back of a structure
like a house, and then you take your two end points and you pull them off to the exact same
distance. And you pull a string line nice and tight. That way you're given an exact straight
line at the same dimensions the whole way through. And that's exactly what I've done here. I have it
pulled for more than the total width of the hoop house. That way I have more than the width of the
hoop house covered for a total straight line. And then I've also pulled a tape measure and I've
marked off the exact points in my design. So I have T-posts that are placed at 13 feet, at 8 feet,
at 5 feet, and then at 0 feet, which is over here. So I've placed a paint mark at where all of my new
T-posts are going to go. And that's what you see right here. And of course, I've done the exact
same thing for the length of the structure as well. I've pulled a string line. And good news
is I can at least reuse three of my T-posts that I originally had erected. I have 9 foot spacing
on all of my T-posts, but I'm going to mark everything at 9 foot 2 because I have the face
of the first T-post at exactly 2 inches because I'm using my drip irrigation line to hold it in
place. So keep that in mind. So once again, I have the paint marks placed at 9 feet. I already have
an existing T-post at 18 feet, and then I have another one at 27 feet, which you can see over
here. And then the final T-post is already in place at 36 feet. So I'm reusing my existing trellis
structure basically, which is going to make my life a little bit easier. So I'm going to go to
each of those paint marks that I designated where the T-posts are going to go. And I'm going to use
a utility knife or a box cutter to make a little cross in it. And that is going to be where I'm
going to drive my T-post through. And then I'm going to use my T-post driver on top of a ladder
to easily and succinctly place all of my T-posts. We have the T-posts in the first row installed,
and you can see how square they are because they all hide behind each other perfectly.
And you do that by allowing the string line to stay in place. And that way you can make sure
that the face of the T-posts are all touching that string. And that's how you get that alignment
easily. And remember, this doesn't have to be perfect. This is just for a backyard garden
installation, but it really makes life a lot easier. It's a way to add precision to your
installation very easily. All you need is a little bit of twine. And I have twine and string lines
linked in my Amazon storefront if you need a link. However, you can pretty much pick this stuff up
anywhere. I also installed the T-posts that are in the front of the structure, and you can see how
square they are as well. The faces of the posts are all touching the string line. And overall,
they look pretty good, at least for my purposes here. And these are going to be the four rows of
my hoop structure. There's a reason why I have them spaced more widely, and they're not evenly
distributed. That's because I want to keep my plants completely undercover. So for the plants
that are on the left here, they're going to have to be on the inside, whereas the plants on the
side are going to have to be on the outside. So I'm going to have to have two rows next to each
other on both sides, and this will give me four rows total. And then I will have a narrow row
that I'll easily be able to walk through and access the backs of the plants and set up my drip
irrigation and be a nice comfortable area to walk through. So I'm simply going to finish the layout,
install all the rest of the T-posts, and then we'll pick up from there. Now all the T-posts
have been placed for the hoop house structure, and I'm going to take you in for a closer look.
So the T-posts have been placed in a pretty straight line. You can tell by the way they
kind of hide behind each other, and overall I'm pretty happy with the way this turned out.
This will give me five arches when it comes time to actually install the conduits on the top,
and this will allow me to have four rows that are completely sheltered from either the sun,
the rain, the frost, whatever I decide to put under it at any different point of the year.
Now the next thing I'm going to show you how to do is support the conduits overhead that are going
to form our arches. So what we're going to do is we're going to use some rebar that is attached
to the T-posts in order to thread the conduit through and then bend it to form our hoops.
You're going to need two pieces of equipment to accomplish this. You're going to need a
four-foot piece of three-eighths inch rebar, and it must be three-eighths inch because that is the
perfect diameter to fit inside the inner diameter of the half-inch conduit. So when you buy the
half-inch conduit, that will slide perfectly over the three-eighth inch rebar. If you go with a
thicker piece of rebar, the conduit will not slide over. And I strongly recommend you go with a
four-foot section so you can clamp it down in several places. I don't think a two-foot section
is going to be long enough. Then we're going to use these right here to secure the rebar to the
T-posts. These are called hose clamps, and they have to be the perfect size because they only
tighten by a fraction of an inch. So I will make sure to link the exact hose clamps that I'm using
for this in the video description. That way you can get the exact perfect size. As for the rebar,
you can pick these up in the concrete aisle of Home Depot or Lowe's next to where they keep the
mixed bags of concrete. So the first thing we're going to do is we're going to slide two of these
hose clamps over our T-posts, and I'm going to put them about in the place where they should be
exactly. And then I am going to partially tighten them in between two of the rungs on the T-posts
just so they will sit still and hold their position. Now once these hose clamps are in place,
we are going to slide our three-eighths inch piece of rebar up against the face of the T-post.
And it is very important that you install the rebar up against the face of the T-post
because when you slide the conduit over, it's going to pull tension this way. So if you put
it on the back of the T-post, it's not going to work. You need to put it against the face
of the T-post because that is where all the tension is going to be. Now I'm going to adjust
this rebar so it protrudes 18 inches above the top of the T-post, and I found 18 inches to be
about the perfect height for me to thread the conduit through. So this is strong enough to
give it some support, but it's not so tall that I won't be able to bend the conduit.
Now that the piece of rebar is in place, we're going to tighten it.
And now this piece of rebar is secure and locked into place, and we're ready to begin
building our hoop structure. Now I'm going to begin constructing the arches,
the hoop house structure using these PVC electrical conduits. And to be completely honest,
I'm not sure exactly how many feet of conduit I'm going to need in order to get the bend in
the structure that I want. So I'm going to do this iteratively, which means trial and error.
And when I see the bend in the structure that I like, that's what I'm going to keep.
And also we're going to make sure that the bell end of the conduit faces outward because we need
this to connect onto. We have to connect another piece onto that. So what I think I'm going to need
is probably about this much PVC. So I'm going to cut it about here, but I'm going to add about
another inch or two just to be conservative because it's a lot easier to lop off another
inch or two than it is to ruin the pipe and have to start all over again. And after a little bit
of trial and error, I figured out that the perfect length of the conduit to make my supports
was 16 feet, four inches. So once I determined that I cut everything to length, I used PVC primer
and PVC cement to bond the conduits together. So they'll have a semi-permanent joint between them.
And then I installed them all. And the final result is what you see above. And I think overall,
it looks pretty solid. Now you'll notice the arches don't appear perfect. And that's largely
because I reused several conduits from last year's shade hoop house. So they were already
pre-conformed with a bend in them. So what's going to happen is the natural heating and
cooling cycle, once they warm up in the sun and cool down at night, is eventually going to soften
them up and they're all going to bend to their new shapes. They will become more uniform as time
drags on. And just to take you on one more final walkthrough so you can see what I'm dealing with
here, this is a 36 foot long shade tunnel. It is exactly nine feet tall when you drop a measuring
tape to the top of the conduit. So that is really nice. And it fits in my backyard just great. And
as I said before, I'm not going to cover it yet because right now we have really nice spring light
temperatures. So when the summer drags on, we'll throw some shade cloth over it. And then when we
get closer to winter, we will outfit it with frost cloth to extend our growing season. And that right
there is how you can build a really inexpensive and pretty large hoop structure for your backyard,
even in a small backyard, even in an HOA, since it's technically not a structure. And I hate giving
prices because when you give prices, they're never accurate over time because things fluctuate so
much and prices inflate. But as of March 2023, this only cost me about $250 to build. Actually,
I spent half of that because I already had half of the supplies on hand. I already had
several PVC conduits, several T posts. I reused a lot of stuff. So I'm barely in this for a little
bit over $100. And I'm going to get tremendous mileage out of that investment. So be sure that
you stick around because we are going to be doing further modifications to the structure. We are
going to run a trellis inside of it. We are going to run drip irrigation to all of our containers,
and I'll also show you how to install a cover. So it'll be a really nice series going forward.
So everybody, I sure hope you found this video helpful. If you did, please make sure to hit that
like button, subscribe to the channel, and please ring that notification bell so you're notified
when we release more videos like these. I will put links to every item that I can down in the
video description. So some of the items that you may find hard to get, like the hose clamps, they
will all be linked below. So check that out if you want to get direct links to the individual
items. I also have a ton of stuff linked in my Amazon storefront down in the video description
underneath trellising supplies and greenhouse accessories. So check out those lists for more
items to build little DIY hoop houses like that. Of course, if you're interested in any of the
other things I use in real life in my garden, they're all linked in my Amazon storefront down
in the video description. And if you want to support my channel, consider buying some custom
merch with my Spreadshop link. Thank you all so much for watching, and I hope to see all of you
again on the next video. Dale, is that good? Dale, you covered up your water bowl again.
You're eating too aggressively. Let's move this over a little bit, buddy.
What do you think, bud? Is your pork loin and liver with jasmine rice good?
Are you going to acknowledge my existence? No? You're not going to share, huh?
No? Dale, if that bowl was painted, you'd take the finish right off.
