Hello Flower Friends! I'm Ellen. I'm a florist, newsletter writer and host of FlowerMore (https://flowermore.mn.co/) an online community of flower nerds who dig deep into the endlessly fascinating world of flowers!
In this video I make a floral head crown. They are easy and cute but take a while to make because of the many small flower bunches needed. A floral head crown is basically a dozen boutonnieres layered onto a wire. I use both fresh and dried flowers and use a pattern for the design..
Head crowns do not take much materials. I use flocked wire which is similar to a pipe cleaner. It has a fuzzy, textured coating that helps to keep the flower bunches in place. I also use a light gage wire to adhere my flower bunches to the flock wire.
For my flower bunches I use fresh rosemary, a small-leafed eucalyptus and lisianthus as my focal flower. For dried flowers I use German and white status, ammobium, and gomphrena. To fill in any holes at the end, I use dried strawflower .
The technique is simple. It does take a long time. It can be a fun project for amateur florists. As a production florist, these can be a hassle and the margin is usually low. Customers are typically not willing to pay the amount it costs me for the time and materials to make these. I usually only sell these to wedding customers. They are cute though.
Join flower friends on all my online flower spaces. Subscribe to this channel to learn about sustainable floral design. My free weekly flower newsletter (https://www.ellenfrost.com) is all about flowers including profiles, farmer stories, news and more! My online community, FlowerMore (https://flowermore.mn.co/), is the place to take your flower obsession to the next level and nerd out on flowers!
AI Generated·May contain errors
Video Summary
AI Generated
Florist Ellen Frost demonstrates how to create a floral head crown using a combination of fresh and dried materials. She explains the necessary tools, the step-by-step wiring technique, and tips for adding focal flowers and final adjustments to ensure a professional, adjustable fit.
Hello flower friends! In today's video I'm going to show you how to make a floral head crown
with both fresh and dried materials mixed together. My name is Ellen Frost, I'm the owner of Local
Color Flowers and I've been a florist for over 15 years. I write a weekly newsletter all about
flowers which you should definitely check out and I run an online community called Flower More
for flower nerds who want more flowers in their life. So making a floral head crown,
the technique is pretty easy. It is time consuming, that's the only thing about making
them. It's easy but it takes a while. So I'm going to show you first the materials that I use and
then the technique I use to make the crown. The first thing I do is I make the base. I use this
flocked wire, we call it velvet wire but I think if you look it up it's the real name is flocked
wire. So it's wire, it's just like a light gauge wire with sort of a velvety outside and that
really helps the flowers and the wire or if you're using tape stay in place. If you use an uncoated
wire things can slide around a little bit. So I like the flocked wire the best. This is a 24 inch
piece but you can get them in 18 or 12 inches, maybe others but those are the ones I know of.
For an adult I like to use the 24 inch piece because you can see it like fits really nicely
on an adult head. You could cut it down if you had to or you could wire two pieces together if
you needed to too but the 24 inch piece is the piece that I like to use. The other piece, the
other material that I'm using is this light gauge wire. This is a I think an 18 gauge, really
flexible and I'm going to use that to wire my bunches onto the flocked wire. You could use tape
if you wanted to, you could use twine but I really like to use just like this light gauge wire is the
easiest thing I've found to use. So to make the base I'm going to just measure and then at the
ends of each of these pieces I'm just going to fold over the end and make a loop with a twisting
motion and actually this loop is where I'm going to put the ribbon on at the end so I'm just going
to make these two loops and now my base is ready to go. You can see it's pretty flexible so somebody
needed to tie it tighter or looser they could do that pretty easily. All right so I have a mix of
materials here today both fresh and dried. So my fresh materials are fresh rosemary. I love using
rosemary in head crowns because it holds up really well and then I have some fresh eucalyptus.
This is called, this is a new eucalyptus to me, Moon Lagoon and it has really small petals and
I'm going to use it cut down pretty short and bunched so I'm not too worried about it wilting.
Then I'm going to use some fresh lisianthus and then for my dried materials I have some gompfrina.
I have, this is immobium or winged everlasting and then I also have German status which is,
I use it in every single head crown because it's so cute and it's dried and it never looks
different it just always looks this cute so it's not going to wilt and then I do have a little bit
of white status that I might use. I'm not sure yet I'll have to see. So the process begins with
taking your materials. I usually start with some foliage and cutting it down into very small
bunches and this work is tedious I have to say. You know making these very small bunches
it does, like I said it's slow going and it's also like a lot of like your head is down a lot
so make sure you're stretching as you go. So as I begin I'm going to take my first bunch
I'm going to place it with the greens towards the loop and the stems towards the wire and then I'm
going to wire that on. There's no need to tie it in a knot or anything you can just fasten it nice
and tight on there and that should work. So you can see what I'm working with now. I'm going to just
trim my stems a little bit so that they are a little shorter and easier to work with. If you
don't trim your stems things start to get thicker and you don't want, you want everything to be sort
of evenly thick so I like to just trim those down and so you can see I've got them on there.
So I'm just going to do the next little bunch with some of this dried amoebium or winged everlasting
and when you're using dried materials you know remember that they are pretty,
well they're dry so they're very delicate. So I might want to instead of wiring these on
with the wire right on the stems I might take a little bit of foliage or something with a little
stronger stem and put it right in the front so that when I'm wiring I'm actually wiring onto
these stronger stems and not onto the dried material. So basically I'm making like a little
buffer for the dried material like that. So I'm just going to lay it right on top of the
bunch underneath it and then I'm going to wire it on. That's the whole technique.
The trick is to make sure that you are making a pattern that you like. So I usually like to do
foliage and filler flower until I get maybe to the side and then I'm going to do some of these
more focal flowers and that's really just preference. If you want all focal flowers
across the whole crown you can use focals all the way across. If you want to have something a
little more delicate, something that feels maybe I don't know a little more whimsical then you
might want to have filler and then only a few focal flowers as you go. So I'm just making my
next bunch and if you want you can pre-cut all of your bunches that might make sense to you.
Sometimes I do that or sometimes I'm just cutting as I go because I kind of want to see how things
are looking. So I'm going to put my next bunch on here, wire it. So you're never going to cut your
wire, this wrapping wire. That just stays on the palette like that and when you're trimming your
stems be sure you don't cut the wire, the head crown wire. I've done that before. Just be careful
of that. You can always wire it back together but better if you don't cut it. All right so I'm just
going to keep going making my bunches. So after a few bunches of filler I might be ready for a
little cluster of focal flowers. One thing to remember when you're using focals is that you
want to make sure you're using something that's going to hold up and not wilt especially if the
person is going to be wearing it all day. So I'm choosing to use a little bit of pink lisianthus.
I'm not going to use much of it but I do want to include some of that. Lisianthus is a great option
because it really does not wilt and it is really very pretty especially in these crowns and these
single stems that I have here vary roughly but also like a perfect size for a head crown. It's
I'm going to try to cover them with a little bit of the rosemary so that I'm wiring onto the
rosemary and not right onto the lisianthus stem. So again I'm just making like a little bit of a
buffer on the outside of the lisianthus so that when I wire it that stem doesn't break off and
you can do a single, you can do a cluster. I think I'm going to do a single and maybe do a pattern
then. So I'll go back to my filler and then do a couple of filler and then add another focal.
I'm just going to put my last bunch in here and all in all this this wreath took me about or this
crown took me about 30 minutes to make. It could be longer or shorter just depending on
what materials you're using and how prepared you are. If you have everything cut up in advance
the wiring will only take a few minutes. So this is my last bunch. I'm just going to wire this on here
and then I might put one maybe one more piece of rosemary or a couple little pieces of rosemary
right at the bottom here so that the wire is covered up. Some little short pieces.
Then I'm going to trim these stems nice and short. Make sure that the wire is nice and tight
and then I'm going to cut my wire finally. You never cut your wire until the very end
and then I'm going to just wrap this around so that it stays nice and tight. You can tie it in
a knot if you want but I found that if you just wrap it really tightly and sort of pinch it against
the frame that will work. So here's my crown. To finish it off I'm going to use some ribbon.
This is just some sheer sheer ribbon that I'm going to put on the ends. This way you can use
any kind of tie at the bottom but what this allows people to do is adjust the crown to fit
their head if they need to make adjustments. I'm just going to put two pieces on here.
So I'm just going to take this loop and tie it right onto the loop and I'm just going to knot
it. Doesn't have to be tight. Nice and tight. Trim it and then I'm going to make sure that my end
is cut at an angle. I'm going to do that on both sides. Okay so that is my head crown.
One last thing I'm going to say is I always like to try it on and look in the mirror and then see
if I see any holes or places that need adjustment. So if I see any spots where I might like to fill
in there's a couple things I could do. I could stick a little piece of you could stick a flower
in and try to wire it in. I find that wiring so just sticking it in and then taking a little
piece of wire and wrapping it around. I find this to be a harder technique because you really have
to wind the wire through the frame. It can get tricky. So the easier way is to do what I would
do is use some cold glue. So Oasis cold glue it just comes in a tube like this. You can get it at
your floral wholesaler or online on Amazon and this is great for things like head crowns where
you just want to add a little something. Let me first tell you that it comes out very quickly so
be careful when you're when you're using it. So you can just take your little stem. You don't even
have to use a stem actually on this one. You could just trim the stem all the way down and then put
a little bit of glue right on there and then glue it right in. I also use I usually try to keep some
straw flower around. This is just dried straw flower heads. Sometimes they pop off the stem or
we just cut them off as we're drying them and you can also glue a couple of those on. I like to do
that. Straw flower is really pretty and adds a nice little touch to head crowns so I might
just glue a couple of those on as well. If you're gluing using the cold glue just make sure you hold
your flower down so that it really adheres. You should hold it for about 30 seconds.
So I might just put a couple of those on throughout. If you had fresh straw flower you
could use those as well and you could use them with the stem on and wire them in but this is
this is a good option if you just have some heads and a little few little spots you need to fill in.
All right so I would let it dry and then I would just hang it up until I was ready to use it.
That is how you make a floral head crown with fresh and dried materials.