Breville Barista Express True Beginner's guide | How To Set Up And Use | Review & Espresso Tips

Love to be a barista
1 follower
9 Video Views·Oct 6, 2026
AI Generated·May contain errors
Hello everyone and welcome to today's video. Today I have this Espresso Bravo Barista Express
to review for you guys. I got mine on sale for like $500. I know it is not cheap but there are
much higher priced options when it comes to a home espresso machine but after a lot of research
I went with this one because I felt like it has the perfect combinations of like aromatic and
auto but also it has the option if you want to dial in and customize your espresso. I really
love it because it is like a true compact all-in-one machine. You get your grinder, your
pump, nice steam wand, you also have like a hot water dispenser, nice temper, all the accessories
and everything you need to make a perfect shot of espresso. So I definitely recommend this machine
if you want to learn more about espresso and continuously perfect your shots but you don't
want to spend thousands. I believe this is a really nice machine to consider. It definitely has a
learning curve that may frustrate some people when they are getting started. That's why in this video
I'm going to guide you step by step to get you started so you can hopefully brew your perfect
first shot of espresso. So before we get started on this video please be sure to subscribe to my
channel down below, hit that thumbs up and without further ado let's get started.
Unscrew the hopper, make sure it clicks to lock. Alright guys so the first thing you should do
before you use your machine is installing your water filter. So this is the filter that came
with my machine. You just need to soak it in water first for five minutes. Now rinse the filter
under water, place the filter inside the filter holder and you can set a date now two months ahead.
Now we can go ahead and install the water filter inside of our water tank and go ahead and fill it
up to the max line. Now I'm going to lock my water tank in and turn the machine on. Now the machine
actually preheats pretty fast. Just wait for the button to stop flashing and now we're going to run
actually, let me just remove the water filter out of the way and we're going to run one cup cycle.
So just place this one, this cup underneath this group head and we're going to run just one cup
cycle to just flush out the machine, make sure the pump is working properly. So just press the button.
Now I'm going to remove the cup out of the way and we're also going to run the steam for about 10
seconds. The machine itself is actually very beautiful and it's actually very heavy duty.
It is made mostly of stainless steel. Next to your grinder you have like a warming tray.
So when you turn your machine on, always make sure you place your cups on the top here so they warm
up as the machine is warming up as well. This is your water filter. It is nice and heavy too.
I'm going to set it aside so I can show you the hidden storage tray that we have on the inside
here. So this is really nice because you can store your extra accessories and tools out of your way,
nice and neat. So we have like a coffee scoop, razor, this is like a trimming tool. We'll talk
more about these in just a minute. Let's just put them back and I want to talk about these filter
baskets. So we have four of these filter baskets. Now these are dual valve, one for single and one
for double shot. And the dual valve means that you use these with pre-ground coffee only. So I'm
going to set them aside because I'm actually not going to be using these today. I'm going to use
these. These are a single valve filter baskets. And again, one for single shot and one for double shot.
And you use these when you are grinding a fresh whole bean coffee. And that's what I'm going to
be using today. So I'm going to take first this single valve, single shot filter basket and I'm
going to place it inside my coffee filter because we are going to be brewing one single shot of espresso.
Now this is your grind size adjuster. My machine came from the factory set to number five. But if
you want to go finer, you can go this way and it goes down to number one. If you want to go coarser,
you go the opposite way to number 16. This is coarse. Now I'm going to set it back to number
five because this is the number Breville recommends. You probably don't need to change it, but if you
need to, you can play around with it. And if you are still not happy with all these numbers, if you
tried all of them and you still you want it finer or coarser, there is a second adjuster inside your
grinder here. To reach to it, you need to remove this hopper. So unlock it and we're going to remove
this grinder wheel. Now if you want to adjust the settings here, you have to remove this handle first.
So you can just pop it out of one side and it will just come out the other side very easily.
As you can see, mine came from the factory set to number six. So if you want to change this number,
you can see here. To go coarse, you have to go this way. So the higher the number, the coarser
the ground will be. And the lower the number, the finer it will be. So for me, I'm going to set it
back to number six because it was working just fine for me. And I'm going to place my handle back on
so I can put it back. Put your hopper back on. Power button's here. This is the power button.
Turns the machine on and off. And like I said, the machine really is ready in like seconds, but I
highly recommend you let your machine warm up like for 10 minutes. You want everything to be
nice and hot for a good quality shot of espresso. Speaking of that, I'm going to insert my portafilter
here and lock it in position so it can warm up as well. This is the grind amount dial. This is how
much coffee you want to fill in your portafilter. So you can adjust that for less or you can adjust
it for more. Now I'm going to leave mine today at here, like three o'clock I would say. This is, I
feel like, the middle. It's a good starting point even for you. You can start here and you can
adjust it later if you want it less or more. Next, we have the filter size. You have to tell the
machine what filter size you are using. If you're using the single shot, you press the button so the
light comes on here. And if you're using the double shot, you press it again so the light comes on
here. So for me right now, I'm using single shot basket, so I'm going to leave it at single. And
this is the program button. You press this button whenever you want to dial in and customize the
water volume and temperature that you want. And lastly, we have these two buttons. So you have
one for single shot and one for double shot. And you only press this button when you are ready to
brew your shot. On the side here, you have the switch for water and steam. So the hot water comes
out this about here. And the steam is for the steam one. So now I want to talk about coffee. You guys
know for best shot of espresso, you really have to use fresh, high quality beans. Now for the purpose
of this video, I picked up this Stumptown brand from Target. I tried this brand before. I really
like the flavor and I know the settings that work best with this brand. So I thought this is
something you guys can pick up too from your local Target. And you can copy my own settings if you
want just a very quick, good quality shot of espresso. So now I'm just going to fill my hopper
with a little bit of coffee. This looks like a nice medium rose. Now you're going to find every
coffee brand is different. And every time you change the coffee brand, you're going to have to
readjust your settings. First, I'm going to unblock my water filter. And Breville recommends you
purge the machine before you brew a shot of espresso with just water. So I'm going to press the one cup.
Now make sure your filter is nice and dry.
Now we're going to grind our coffee. Just place it inside and give it a nice push.
Time to tamp your coffee. So take your tamper out. I like to first use my finger just to spread it
around. Make sure everything is nice and even. And now I like to use my tamper. Give it a nice
twist in the beginning. Again, just to make sure everything is level. And then you can start
applying pressure. You don't want too much of pressure. And you don't want it too light either.
Just something in between. Now I'm going to remove my tamper. Set that aside. And use the razor to
trim off any excess coffee. Just move it back and forth. Now it is time to extract your coffee.
So I'm going to place my water filter inside the group head and lock it. Place your cup beneath it.
Keep your eye on the brush or needle here. It has to be in this gray area. Always stir your
crema right before you don't want to taste it. It's actually really good. I was thinking that
you should always keep an eye on the needle. You really want to be in that gray area. Most common
problem that people have low pressure or high pressure. If you have low pressure, then your
ground coffee was grounded too coarsely. And if it is too high pressure, then the coffee is too fine.
So you just have to adjust it. On this shot here, the pressure was way too high. And that is because
I had too much coffee in the filter basket. And also it was dripping on one side a little bit more
than the other. It wasn't even. And that is because the tamping wasn't enough. It wasn't level. I had
more coffee on one side than the other. And you can see the machine really choked and didn't give me
the full volume of one single shot. Now I'm going to brew a double shot espresso. And I'm going to
some more tips with you guys to just make sure I cover everything. So let's go ahead and do that.
Now I'm going to do a double shot of espresso. I already have my double shot filter basket inside
my Portafilter. And I'm going to show you if you don't want to use the grind amount dial
and you want to do it manually, you can do that. You can fill up your Portafilter
manually. And the way to do that, there is a tab inside here. So push on it with your Portafilter
and hold it. Once you're happy with the amount of coffee you have inside, you can stop it.
And now you can see. You can tamp it and see. If you need more, you can also add more manually.
And the way you know that you need more coffee is by this rim of the tamper. This metal rim
should line up after you tamp it. It should line up with the top of the filter.
So mine still needs a little bit more. So I'm going to do this manually now.
All right, now I'm going to tamp that and see if this is enough. Again, just make sure everything
is nice and level and you can start tamping. Now get your razor and again just shave off
the extra coffee. Like you guys saw, we had a perfect pressure. Again, to make good espresso,
it is really a combination of the two. Grind size and the grind amount. That's why I showed you how
to grind coffee manually so you know how much you are putting in the Portafilter and you get used
to it. And you know you have the perfect amount of coffee when the metal rim of the tamper line
up with the top of the filter basket. You know that's the perfect amount of coffee. Because if
you don't have enough coffee in the Portafilter, you're going to have a too low pressure. And if
you have too much, you're going to have a high pressure. And that's not good. So right now,
for those two double shot espresso, I think I'm going to make Americano to show you guys how to
use the hot water dispenser. And you guys know Americano, it is really personal preference. You
can add as much water as you want. I like equal parts coffee to water. So that's what I'm going
to do. But feel free to add more water if you want. This is also very good. And the hot water
dispenser, it is also like useful if you want to make tea or just rinse out your Portafilter
and warm up your cup. It's a really nice feature to have. But now I'm actually going to make
Cappuccino. So we can finally show you guys how you steam your milk with this espresso machine.
So we have actually the jug. I'm going to bring it out and bring some milk. Because if you want
to make Cappuccino, all baristas are trained to make the milk first and then pour out your shot
of espresso. So let's do that first then. All right. Now you see the V-shape that the spout
makes on the inside of your jug? Consider this your max line. So fill up your jug until you get
to the bottom of this V. You don't really want to go above it. Now before you steam your milk,
you need to vent the steam wand to remove the residual water from the boiler line so you don't
end up with a couple of teaspoons of water inside of your milk. After 10-15 seconds, the water will
start to drip out. Then it will turn to steam. Let it just go on for like a few seconds. Then
turn it back to standby and quickly put the wand into the milk. Then turn back to steam. You need
to do this within like 8 seconds or you will have to brush the wand all over again. You want the
steam wand tip to be just under the surface because you don't want it to be buried because
we want to start introducing a little bit of air into the milk. So hold this position for about 20
to 30 seconds. Once you feel it getting warm, raise the pitcher back up and bury the steam wand
to stop the introduction of air. And now tilt the jug a little bit so the milk swirls around the jug
and this is going to help you get that creamy textured froth milk. And you're going to hold
this position for about a few seconds until you're happy with the consistency. And you also know when
the jug gets too hot to hold and uncomfortable, then you probably got to the right temperature.
So just turn the steam off. Now set the milk aside and quickly wipe it down with a washcloth or
something wet like a paper towel or something. And this is a really important step because you don't
want any milk to dry on your steam wand. Right now I'm going to brew my coffee and I'm going to
split this double shot espresso in two cups so we can have a single shot in each one.
And tap your milk jug on the counter just to get rid of any big bubbles.
And give it a swirl. This is how you get a very nice glossy finish on your milk.
Just nice and slow. It's perfection. Much better than what I used to drink. And honestly the process
is really fun. Once you get the hang of it. I just want to mention always keep an eye out for the
water tank because this machine doesn't have sensor and it will run even if it doesn't have
any water in it. And I can only imagine that could damage it permanently. So with that we can leave
this video my friends. I hope you all enjoyed it. If you did please thumbs it up, consider subscribing
and I will see you next time. Bye!
