LEGO Cars vs Gravity!

Happy Lego
25 followers
7 Video Views·Oct 1, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video documents a series of experiments to find the ideal wheel modifications for a LEGO car to climb steep angles. After testing various adhesives and mechanical designs, the creator explores magnetic configurations to achieve near-vertical movement, ultimately determining which materials provide the best balance of grip and mobility.
Today, I'm going to test five LEGO cars with different wheels,
from suction cups to magnets.
And we're going to find out if I can make a car that can actually climb walls,
starting with our control vehicle.
And we're going to increase the angle of this platform until it can no longer climb.
Starting at zero degrees.
It dries.
Let's try 10 degrees.
It climbs to 10 degrees.
30 degrees.
Ah, there we go.
45 degrees.
Wow.
I'm actually quite impressed with this setup.
All right, 60 degrees.
No.
Looks like 45 degrees is our max.
But we're going to take these wheels and upgrade them using different items
to see if we can get it to climb vertical or even upside down.
The first upgrade I want to make to these wheels is adding Velcro
to see if we can make it actually stick and unstick as it's driving.
I don't know if this will actually work, but I was thinking,
if we just add a simple layer of electrical tape around the wheels
and then a bunch of little Velcro dots,
we can line our testing surface with the other side of the Velcro.
Since I don't think our Velcro is going to stick to the outside of this tire,
I'm going to use some electrical tape and just kind of wrap it around
to give it a nice smooth surface.
Just like that.
I bought these giant rolls of Velcro,
and so we're going to put this on the actual surface we're driving on,
and then we're going to put these little Velcro dots,
which stick to this, onto our car.
And we put all these on the wheel just by sticking them down.
Oh, yeah, that's great.
Look at that.
We just got to add a bunch of these around the edge of this wheel.
I hope this is able to actually roll.
Let's just do a quick test and see if this rolls.
Yes, but it requires a lot of effort.
Some of these dots are coming off, so I think
we just have to put them a little bit further apart,
and that should work good.
They're just coming off.
So this idea is out. That's not going to work.
Let's instead cut a strip of fuzz and wrap this around the wheel
and see if that will perform a little bit better.
Then we wrap this around the wheel somehow.
You know what? I'm thinking that might actually work pretty well.
I'm making the lines of Velcro a little bit thinner
so they don't have as much grip.
While that sounds counterintuitive,
having so much grip is preventing the car from driving.
So instead, I'm using this thin little line like so,
and then attaching that to the tire with a little bit of hot glue
because it comes off.
And that should run across.
I think this is promising, so let's finish the other three tires,
and then we can actually test it out.
Now that we've got our Velcro wheels all finished,
we can test these out on the car.
For this one, we can actually swap out our plate
for this Velcro plate I made.
And since we put the hooks on the car tires,
we actually made this all the loops, so it's kind of smooth.
Zero degrees.
Wow, it's very sticky.
Oh, no. We're losing one.
We've lost our first piece of Velcro on the tire,
but that's probably for the better
because this is really sticky.
What if we do this?
We take two of the Velcro pieces off.
There we go.
Now we're driving.
Let's test it at about 20 degrees.
It looks like past here,
it doesn't really have the torque to get up the hill,
so it's not working great.
Looks like about 20 degrees is the max angle
we can go with this one,
just because it's getting so stuck.
But we can do the flip test, see what works upside down.
It does work upside down.
Man, I had a lot of hope for this Velcro car,
but we're not giving up.
We got some other ideas, so let's test those out.
For this next tire upgrade,
I'm going to literally cover these
in double-sided sticky tape.
But I'm actually pretty sure
this is decently strong sticky tape.
We're going to just literally
go all the way around the wheel.
I hope this actually sticks.
Ew.
Wait, we need some bigger wheels
because this tape is actually a lot wider.
I've had no luck finding the piece I need,
so now it's time to break out the big container of tires.
I guess it's nice having a bunch of tires
if you can pair them up.
Okay, unfortunately, it looks like
I only have two of the giant ones
because I got them from the old Batman tumbler set,
but I actually have these ones
which are just a little bit smaller
and should have kind of the same width.
So we'll just use four of those.
Now we can wrap our tape around these wheels.
I don't think it's going to stick really well to this tread,
but let's give it a shot.
All right, now we got our wheels.
Let's test these out.
And now for the moment of truth,
we just peel off our backing
and we should have really sticky wheels.
Now, because I know this will work horizontal,
I'm going to stick it on.
We're just going to angle it like this
and try and drive it vertical.
Okay, so here we go.
This is what we got.
We're still going.
We're still good.
We're good.
Okay, now here we go.
Let's try right here.
Oh no, it's too sticky.
No, what a dumb idea.
Oh my gosh, this is like actually stuck.
We're going to take these off
because that's not going to work.
Let's try just putting two regular wheels on the back
so it has something to push.
But let's just see if this will drive.
The wheels are actually stuck.
Like they're stuck.
No, well maybe they'll drive like this.
Huh?
No?
Guys, I don't know about this one.
This might be a failed attempt.
The sticky back tape is not the best idea.
I can't get it to go.
It doesn't have the torque to spin the tape
because the tape is so sticky.
So it did stick upside down,
but it doesn't drive on the walls
and we want a car that actually drives on the wall.
So this one's a fail.
Let's try the next one.
Guys, if you're enjoying this, make sure you subscribe
because we upload videos like this every couple weeks.
So I actually just had this really cool idea.
What if we made gecko treads?
The idea behind this is we actually take a bunch of sticky glue dots
with some of these fancy little treads here
and build it like a sticky tank
with these glue dots lining the treads
kind of like the feet of a gecko
which is known to be able to climb walls
and other surfaces that other animals can't climb.
So we're going to do these axles
and we'll use the one by fives, I think.
Then we'll just stick these in the sides here.
Now we just need cogs.
And for those of you who aren't familiar with the term,
these are cog wheels.
They're essentially just these little wheels,
kind of like a large gear.
But the nice thing is they actually slot into our tracks here.
So if we turn this, the track will rotate like so.
And link this like so.
Let's see if that works.
I'm going to do a pattern with a bunch of arrows.
I can't remember what it's called.
And hopefully it'll have just enough grip to make it up our slope.
I'm just like pressing them onto here.
It comes off when I go here.
There we go.
Okay, look how sticky that is.
Look at that, guys.
That is some serious gecko tread.
Now we can put these back on here and test it out.
All right, we got our tank treads coming in for this one.
Let's put our axles on.
Here we go.
Zero degrees.
Starting out.
It goes.
It doesn't go very fast because it's so stuck.
We put way too many sticky dots on there.
This is going to work great.
Zero degrees.
Last try.
There we go.
Look at that.
Now we're rolling.
Okay, and it's sticky enough that we can go.
30 degrees.
Oh, yeah.
30 degrees.
Let's go a little further.
Nice.
All right, it climbs at 40.
55 degrees.
Let's see what we can do.
Oh, it's going.
Oh, no.
Wait, but it was going though.
Wait, you're okay.
50.
50 degrees.
There we go.
Okay.
Will it go vertical?
Unfortunately, it won't go vertical because the weight of the tank is just pulling it off.
And then the tread spin, that doesn't work very well.
But we made it to 50 degrees, which beats our control vehicle.
Luckily, I got another idea.
So let's test the next one.
The next upgrade I want to make for these wheels are suction cups.
These are these cool little mini suction cups.
And what I want to do is just put them all the way around the wheels.
See if we can actually make tires that will roll and stick and unstick as the car's driving.
You see, there's this cool pendulum I made.
It has these two little round 4x4 bricks here.
And if we only use four of these, there's these nice little grooves here
that should allow us to just seat our suction cup just like that.
And then sandwich it like so.
Then we see an axle and a 2x2 round plate with an axle hole.
Because this is actually just a little round circular opening.
So if we put these in here and close it up.
There we go.
Look at that.
Okay.
This is looking promising.
Check it out.
We put a plate on here.
And then we do another plate back to back.
And then we can add more suction cups to this one.
It's genius.
Check it out, guys.
Now they're staggered.
So what I think this will do.
Now all that's left to do is just squeeze this on here and attach it into our car like this.
Let's build three more and actually test it out, which is why we're here.
You guys, I have some amazing news.
Our Lego building course officially launches right now.
Are you ready to go beyond the instructions?
This is Brick Science Plus.
The ultimate Lego building course that'll teach you to build like a master Lego inventor.
Through 12 interactive lessons, you'll learn exactly what it takes
to turn your ideas into functional Lego builds.
From the fundamentals of the Lego system to building complex mechanisms and functions,
you'll learn the most advanced Lego techniques.
Each lesson looks something like this.
We start by learning a new core concept or building technique
with any applicable pieces that you'll need to make it work.
Then you'll watch me as I put that technique into practice by building something awesome.
And at the end of each lesson,
you'll put what you've learned to the test in a special building experiment.
In one of the lessons, we actually worked on motorizing this Lego chassis for the car
with these gears on here that actually drive the drive shafts.
Brick Science Plus is here to teach builders like you how to take your own cool ideas
and turn them into real functional Lego creations that'll blow people's minds.
So if you're ready, join Brick Science Plus and let's build something cool.
So make sure you click the link down in the description
because you are not going to be disappointed.
We put a lot of work into this and it turned out really cool.
Here we have our suction cup wheels.
These things actually, I think, turned out pretty well.
I'm a little worried about how well they're going to stick as we're driving across
because usually suction cups take just a little bit of pressure to stick them down.
But we'll stick them down initially and then see if it drives.
Here we go.
Zero degrees. Let's try.
Ooh, it sounds really cool.
What a bumpy drive though.
Let's just work our way up.
Let's go 10 degrees-ish.
10 degrees works.
30 degrees.
Oh, it's kind of sticking actually.
Look at that.
It's like trying to grip on there, which looks pretty cool.
Let's try 45 degrees.
Here we go.
Looks like our max for this car is about 30,
but I am really curious if we stick it down, can we go all the way upside down?
So let's test vertical.
Now, we can't drive it vertical, but it does stick pretty well.
Now, can it go upside down?
Yeah, there we go.
Does it drive?
No.
What the heck?
So 30 degrees is our max on this one.
It didn't work super great, but I think the next one will work even better.
The next upgrade I want to make to these wheels is to turn them into magnets.
And while that sounds pretty easy, it's actually pretty hard.
I've been sitting over here for like an hour, probably,
trying to figure out a way to take these tiny little magnets
and fit them into Lego wheels in a way where they don't fall out
and actually stick to our surface.
So I've come up with a few things I want to test.
The first wheel is just going to be taking one of these 4x4 round bricks
and putting four little magnets inside the gaps on the sides here.
Okay, and then what we want to do is grab a little 2x2 right here
and some sort of plate to lock it all in.
Now, the benefit of this is we don't have to use any glue or anything,
and we have four magnets.
So there's our first version.
The second idea I have is to take these bar magnets
and actually create some little things that hang down next to the wheels off the axles.
And then we'll put some real grippy wheels, like these rubber ones.
And if we put these magnets close enough to the ground,
they should pull the wheels into it, giving us more grip.
And then for the third idea, I'm going to take some of those 4x4 clear window cylinder pieces
and glue some of these magnets onto the inside.
That way, they won't break off,
and we'll have just a thin layer of plastic between the magnets and the floor.
And that should hopefully give us a little better connection.
Now that we have our magnetic wheels, let's test them out.
All right, we got our magnets.
Check it out.
These ones right here are kind of interesting.
They're basically just like these cylinder tubes,
and then I put the magnets on the inside.
Then I have the basic ones, which we'll test first.
And these guys, which are little tracks that'll sit on the sides of the vehicle.
All right, we're starting this at zero degrees.
Obviously, does it go at zero degrees?
It does.
It drives at zero degrees.
That's perfect.
We got about 15 degrees.
Drives at 15 degrees.
All right, these are looking promising.
I didn't expect that.
30 degrees.
Hey, all right.
30 degrees.
40 degrees.
It slipped a little.
It's sliding, but it's going.
Don't go off the side.
Wow, that's actually really impressive.
This is 45 degrees.
Let's see if it works.
No.
All right, well, 40 degrees is our max with that one.
Let's pop on the next set and see if we can get any better.
Next up, let's try our cylinder wheels.
This car looks so weird.
Okay, we're going back to zero.
All right, starting off at zero degrees.
Obviously, it works.
It's got quite a bit of traction, which isn't bad.
15 degrees.
Looking strong at 15.
Nice.
30 degrees.
Here we go.
It seems like this one's working better,
A, because there's more magnets,
and B, because more surface area for the tires.
45.
Here we go.
45 degrees.
There we go.
It's sliding a little bit, as you can see,
but it is making it up.
If I go down.
No.
It looks like our max was around 46 degrees with these ones.
Let's try this last set of magnets and just see if we can get it any further with grippy wheels.
And all these are are just these little magnets that hang over the side
and barely touch the surface.
Let's see what we can do.
Zero degrees.
Wow.
Okay, so it works.
I'm just...
We're going to skip to the end, guys.
Let's see what we can do.
Start with 30.
Here we go.
30 is looking good.
Nice.
We got 50 degrees.
Let's see.
Nice.
Let's see if we can drive this one vertical.
We're starting at the very bottom.
Let's see what we got.
I guess this here is the most we can go,
which is really impressive considering it's just two little magnets holding this on here.
Well, guys, it looks like our magnet car won.
That's it for this one.
Check out one of these two videos popping up on your screen,
and I'll talk to you in the next Berks Science.
See ya.
