MUSIC USED: (These are affiliate links to AudioJungle)
DISCLAIMER This content contains affiliate links. If you decide to make a purchase through the link, I will make a small commission at no additional cost to you. This helps fund free tutorials on the RFA channel and website. Thank you for your support!
AI Generated·May contain errors
Video Summary
AI Generated
This tutorial provides a comprehensive guide on drawing a nose, covering everything from basic geometric guidelines and proportional placement on a face to advanced shading techniques and blending for a realistic, three-dimensional effect.
Hey, this is Darlene and you're watching a Rapid Fire Art tutorial on how to draw a nose.
Here are some general steps to draw an average looking nose.
Start with a circle. This is the tip of the nose.
On both sides, draw two lines for the bridge.
Curvy lines outward at the top as the bridge turns into the brow bone.
Through the middle of the circle, draw a horizontal line.
Extend it to the right and left, slanting your strokes down just a bit.
At the ends, draw two short vertical lines.
Connect them together at the bottom by drawing a line stretching from one side to the other.
At the top, draw two strokes that point towards the bridge.
I'm going to do a few more examples of this later, so don't worry if you don't get it right away.
Now that we have a set of general guidelines, we can start to draw the actual nose.
Define the tip of the nose by working your way around the circle.
Draw the nostrils and sides by following the rest of the guidelines.
I'm going to show you some unique examples so you can create a variety of nose shapes.
Watch how a few small changes will give me a completely different looking nose.
This one's more angular.
Draw a really big circle for a big, bulbous nose.
Here's one with narrow nostrils.
This one has higher nostrils.
The biggest difference here is that the horizontal line is not going through the
center of the circle. It's going through the top.
Continue to stretch your imagination to get some pretty cartoonish noses.
Once you get comfortable, slowly eliminate some of the guidelines.
Here, I'm down to using just the circle.
Okay, this is good and all, but what happens when you want to add eyes?
Let me quickly draw a pair of eyes for this example.
Draw a line down the center of the face so when you draw the nose, it's nice and straight.
Draw a vertical line coming down from the inner corner of each eye as well.
These will mark the boundaries for the nose.
Okay, now we know how wide to draw, but what about length?
Here are two methods to do this.
Method one.
You can measure the full iris and add about three irises to the bottom of the eye to find the nose length.
You can do this with your pencil and finger to get a rough measurement or your ruler.
Method two.
Draw a triangle where the top two corners touch the outer corners of the eyes.
This method requires a bit of trial and error.
A good triangle shape is where all the sides are similar in length.
Once you pinpoint the length, draw your circle and the rest will follow.
Let's do this again with a longer triangle.
You can do quick sketches like this to find the triangle shape that works for you,
but make sure you keep your lines super light so they're easy to erase
just in case you need to reposition anything.
Just for funsies, I'm going to quickly draw a cartoon in the narrow space I have on the left.
This way, you can see me draw a more complete face.
The rest of this video is going to be focused on shading,
but first, I'm going to quickly build the guidelines and nose.
We've got the circle, a bridge, and to check the nose for crookedness,
place a transparent ruler down the middle vertically,
and any crookedness should become apparent.
Draw a horizontal line through the middle of the circle.
Extend the ends out and down.
Measure them to make sure they're the same size,
or else one nostril could be bigger than the other.
This is easy to fix now instead of later, so take your time with the guidelines.
Add lines going up towards the bridge and another one at the bottom going around the circle.
Check that your nostrils are level by using a ruler aligned to the edge of your sketchbook.
The nostril is a little higher on the right, so let me fix that before we move on.
Alright, guidelines are done.
Remember, you don't have to follow your guidelines exactly to the T.
I'm going to draw the bottom of the nose a little further down than the circle.
This will make the nose a lot less round.
Still using an HB here.
To add some definition and bring out the tip of the nose,
I'm adding a few curves around the circle.
Before shading, make sure the outlines are super light.
They should be barely visible.
This way, they won't show through in the end.
I'm darkening some areas so you can see just how effective this is.
Roll a soft kneaded eraser until it's wider than your drawing
and is completely smooth so you can lift the graphite evenly.
Roll it over your drawing swiftly to lift the graphite away until it's a light gray.
Now it's ready for shading.
With a blunt HB pencil, shade a light even layer along the bridge and circle.
I'm using the circlism technique, which is comprised of many overlapping circular shapes.
Avoid harsh lines like this along the nose bridge and instead outline it by shading.
I'm just drawing a bunch of tightly woven circles.
Shading around the sides of the nose as well.
If your original outlines start disappearing, darken them ever so slightly.
I'm going to give this nose overhead lighting,
so any areas facing away from direct light will be shaded darker.
I'm still using an HB, just slowly building and layering these values.
While you can shade it really dark to begin with,
layering slowly will save you from making permanent mistakes.
Or ones that are just hard to erase.
Shading around the circle.
I'm leaving the center of the circle white because I want to highlight it later.
So I wanted to use a 2B pencil to slowly build this up,
but I couldn't find it anywhere, so I'm using a 4B with very little pressure.
Earlier I made a few outlines to define the tip of the nose, but they disappeared.
I'm going back over these areas to give the nose a more unique form.
To make the bridge look more interesting to the eye, I'm making it more narrow at the bottom.
Alright, before the nostrils disappear completely, I'm going to shade them using a 4B.
The top part of the nostril has an abrupt change between light and dark values,
so it's okay to use dark strokes.
I want the edge to be really defined.
Just make sure the shading is softer and more gradual at the bottom of the nostril.
I'm doing the same thing with the bottom of the nose, but the lines are much lighter.
I'm trying to avoid what looks like thick or obvious outlines.
Now I'm using an HB to shade a super light layer of graphite over everything,
just so it's a different shade of color from my sketch paper.
To cover more ground, use an overhand grip on the pencil.
This will give you thicker strokes, and they're also easier to blend.
Along the bridge, make the shading look more gradual by slowly layering
small amounts of graphite all the way down.
Do the same thing across the whole drawing,
making sure there aren't any harsh edges where the skin should be soft or smooth.
The form is really coming together now.
If you feel comfortable with the way it looks,
continue adding more layers on top of the dark areas you defined earlier.
Working in layers allows you to change your mind before truly committing to the final design.
I'm using a 4B mechanical pencil for higher precision.
For a beginner, I recommend shading smooth areas of skin using a regular 4B pencil,
just in case you catch a sharp edge.
It'll also be easier to blend.
I like the shape of the nose so far,
so I'm going over the darkest areas and amplifying them bit by bit.
You can do this with a 2B pencil as well.
Using a 4B just means that you'll need to be extra careful with the amount of pressure applied,
since softer pencils produce darker values with little effort.
In case you're wondering,
the thin highlight around the bottom of the nose is coming from reflected light.
As I mentioned earlier, the light source for this drawing is coming from the top,
but the light bounces and reflects off of many surfaces such as
other parts of the face, dust particles in the air, walls, and even flooring.
These reflections can brighten areas facing away from the direct light source.
Hence the highlight around the bottom of the nose and the sides of the nose.
I'm going to shade this area a little darker because it's angled downward,
which means there's less light reaching the surface.
The example that I'm drawing here is a profile view of the nose.
Alright, let's blend this.
You can use many tools for blending.
This is a blending stump.
I like to rough up the sides so I can use the fuzzy part to blend,
instead of full contact blending.
It feels kind of like shading and does a great job if you have the time.
To save time, I'm going to use a soft tissue.
The tissue is wrapped around my finger to cover a large surface area.
After every swipe, remember to move your finger to a clean spot.
Prevent unwanted smudges by blending in sections
and avoid blending from a dark area into a lighter one.
Okay, I found my 2B pencil hidden under the desk.
I can shade a lot faster with the 2B
because I can use it without thinking too much about pressure.
I'm using an HB to shade along the bridge and tip of the nose.
These are areas I want to highlight later,
so it helps to make them darker than the color of the paper.
I'm darkening the nostrils again, and here's what I'm doing.
I'm outlining the top and gradually shading the bottom,
instead of outlining the entire shape of the nostril and then shading it in.
Okay, let's blend this one more time.
The skin looks a little bit grainy because the sketch paper is textured.
If you need to, use a sharp HB pencil to fill in white dots or valleys on the paper's surface.
I'm just filling in the really obvious ones.
Alright, there are a few blotches and black dots all around the nose.
To get rid of these, you can roll a kneaded eraser to a fine tip and lightly dab them away.
Repeat the process of filling white space
or removing blotches until your shading is as smooth as possible.
Okay, let's lift this drawing off the paper by adding some bright highlights.
Pinch or roll your kneaded eraser into your desired shape.
Then dab, rub, or swipe graphite from the lightest areas of your drawing.
If you want to lift away less graphite, use very light pressure.
This is a great way to get soft edges.
I'm just lifting blotches and softening the edges
around each highlight to make the lighting look less harsh.
If you make any mistakes, use an HB pencil to fill in the spaces.
To give the drawing more depth, make your shadows even darker,
but remember to darken some of the midtones as well.
So that's pretty much it, guys!
If you enjoyed this tutorial, don't forget to hit that like button
and subscribe to my channel for more drawing tutorials.
To be notified when I post a new video, click the bell icon beside the subscribe button as well.
And if you tried this tutorial, send me your drawing and I'll feature it in the next video!